Showing 1–16 of 49 results


  • The Hioki 3269 Power Supply is a four-channel unit designed to provide stable power to Hioki flat bandwidth AC/DC current probes, including the 3273-50 to 3276 series, CT6700, and CT610 series. It enables accurate current measurement output for Memory HiCorders, oscilloscopes, and other data acquisition instruments.

    Key Features

    • Supplies power to Hioki current probes 3273-50 to 3276, CT6700, CT610 series
    • Four-channel power output for multi-probe setups
    • Compatible with Memory HiCorders and oscilloscopes
    • Output voltage: ±12 V ±0.5 V, maximum 2.5 A (total of all channels)
    • Compact and lightweight design: 80 × 119 × 200 mm, 1.1 kg
    • Wide AC input range: 100–240 V AC, 50/60 Hz, 170 VA max
    • Simple integration into data acquisition setups
    • Note: Requires compatible current sensor to operate

  • The Digital Multimeter DT4281 is Hioki’s flagship high precision multimeter, engineered for advanced electrical and power system testing. Featuring a 60000 count display, true RMS measurement, and industry leading safety design, it delivers fast, accurate results even in complex and high energy environments.

    Key Features

    • High resolution 60000 count digital multimeter
    • Excellent DC voltage accuracy of ±0.025 percent
    • Wide AC voltage frequency range from 20 Hz to 100 kHz
    • True RMS measurement for accurate readings on distorted waveforms
    • Low pass filter for inverter and harmonic rich signals
    • Clamp sensor based current measurement for enhanced safety
    • Terminal shutter mechanism to prevent incorrect lead insertion
    • Dual display for simultaneous voltage and frequency monitoring
    • CAT IV 600 V and CAT III 1000 V safety rated
    • Designed and manufactured in Japan with 3 year warranty

     

  • The DM7275 Precision DC Voltmeter is a high stability 7 and a half digit DC voltmeter designed to bridge the gap between research environments and high volume production lines. With a guaranteed one year accuracy of 20 ppm, it delivers reliable and repeatable measurements for lithium ion batteries, advanced capacitors, and next generation electronic components.

    Key Features

    • 7 and a half digit DC voltage measurement
    • 1 year guaranteed 20 ppm accuracy
    • Ideal for R and D and production line testing
    • Capacitance contact check using built in C monitor
    • Fully automatic self calibration for long term stability
    • Resistant to temperature fluctuations
    • Simultaneous voltage and temperature measurement
    • Temperature compensated voltage display
    • Built in EXT I O, LAN, and USB interfaces
    • Optional GP IB or RS 232C communication models
    • Built in variable power supply for global production use

     

  • The DM7275 Precision DC Voltmeter provides 7½-digit resolution and 20 ppm accuracy, making it perfect for R&D, production lines, and high-precision battery testing. Its advanced contact check, temperature compensation, and multiple connectivity options ensure reliable measurement for lithium-ion batteries, EV components, and next-generation devices.

    Key Features

    • High-accuracy 7½-digit DC voltmeter with 20 ppm (0.002%) guaranteed accuracy
    • Built-in capacitance contact check for maximum measurement reliability
    • Temperature compensation converts voltage to standard temperature values
    • Fully automatic self-calibration for long-term stability
    • Built-in EXT I/O, LAN, USB, GP-IB (DM7275-02), and RS-232C (DM7275-03)
    • Supports R&D and production line environments worldwide
    • Simultaneous measurement of temperature and voltage
    • Ideal for Li-ion batteries, EV components, and electrical double-layer capacitors

     

  • The DM7276 Precision DC Voltmeter is a 7 and a half digit high accuracy instrument designed for ultra precise DC voltage measurement. With industry leading 9 ppm accuracy, it is ideal for lithium ion battery aging tests, capacitor evaluation, and next generation energy device development.

    Key Features

    • 7 and a half digit precision with 9 ppm accuracy
    • Designed for lithium ion battery aging and evaluation
    • Built in capacitance contact check for reliable measurements
    • Fully automatic self calibration for long term stability
    • Resistant to temperature fluctuations and environmental changes
    • Simultaneous voltage and temperature measurement
    • Temperature compensated voltage display
    • Supports global production with variable power supply
    • Built in EXT I O, LAN, and USB interfaces
    • Optional GP IB or RS 232C communication models

     

  • The DMM Station MR8990 combined with the MR8740 or MR8741 Memory HiCorder delivers high precision, simultaneous DC voltage measurement across up to 32 channels. Designed for capturing minute voltage fluctuations, this system is ideal for advanced sensor analysis, battery testing, and automotive electronics evaluation.

    Key Features

    • High precision DC voltage measurement using DVM Unit MR8990
    • Simultaneous sampling across multiple channels
    • Supports up to 32 channels with expandable configuration
    • Measures minute voltage fluctuations with high resolution
    • Accuracy of ±0.01 percent with 1.2 million count resolution
    • High speed sampling up to 500 samples per second
    • Isolated inputs for enhanced safety and signal integrity
    • Suitable for battery, sensor, and automotive testing
    • Rack mountable system for laboratory and production use
    • Compatible only with MR8740 and MR8741 Memory HiCorders

     

  • The EASY-DRIVER Power Supply is a compact digital bipolar power supply series designed for precise current control and flexible integration in laboratory and industrial environments. Delivering up to 200 W output power, this highly configurable unit combines advanced digital control with reliable Ethernet connectivity for seamless monitoring and operation. With multiple output configurations and low noise performance, the EASY-DRIVER Power Supply provides a cost effective and high performance solution for powering sensitive electronic loads.

    Key Features

    • Compact bipolar digital power supply with output power up to 200 W
    • Multiple output ratings including ±1 A at ±12 V, ±2 A at ±20 V, ±5 A at ±20 V and ±10 A at ±20 V
    • Digital current control loop for precise and stable operation
    • Low noise and high bandwidth output performance
    • Ethernet connectivity with TCP IP and UDP communication
    • Multi DSP architecture for reliable digital signal processing
    • Local display for output current and voltage monitoring
    • LED indicators for real time system status
    • Built in protections including over voltage and over temperature
    • External interlock signal and inductive load discharge circuitry
    • Compatible with laboratory equipment and standalone installations

     

  • The FAST-PS-1K5 Power Supply is a high performance bipolar digital power supply designed for demanding laboratory, industrial and research applications. Delivering up to 1.5 kW of output power, this advanced system provides precise current and voltage control along with integrated monitoring tools and flexible communication interfaces. With digital control architecture, built in web server functionality and high stability sensing technology, the FAST-PS-1K5 Power Supply offers a reliable solution for battery testing, superconducting magnet systems and advanced power electronics applications.

    Key Features

    • High performance bipolar digital power supply with power ratings up to 1.5 kW
    • Accurate current and voltage control for precision power applications
    • Output models available up to 100 A and 100 V
    • Digital control loop for flexible configuration and load adaptation
    • Integrated web server for monitoring and system configuration
    • Built in waveform generation and triggering capabilities
    • Four channel oscilloscope monitoring at 100 ksps
    • High precision current sensing using 0 FLUCS DCCT technology
    • Gigabit Ethernet connectivity with additional SFP communication slots
    • Optional four quadrant operation with dedicated external crate
    • Quench protection support for superconducting magnet systems
    • Local display and interface for monitoring voltage and current

     

  • The FAST-PS-M Power Supply is a high performance monopolar digital power supply designed for applications that require stable current and voltage control. With output power up to 900 W, this advanced power system integrates a digital control loop, embedded web server and built in waveform and monitoring tools. Its high precision sensing technology and fast communication interfaces make the FAST-PS-M Power Supply an ideal solution for research laboratories, industrial test systems and precision electronics applications.

    Key Features

    • High performance monopolar digital power supply with output power up to 900 W
    • Precise current and voltage control with digital regulation
    • Built in Arbitrary Waveform Generator operating at 100 ksps
    • Integrated four channel oscilloscope with high precision monitoring
    • Embedded web server interface for configuration and control
    • High speed Ethernet connectivity with 10/100/1000 Mbit support
    • Dual SFP communication slots for fast feedback and system integration
    • Low noise output and high bandwidth performance
    • High precision sensing using 0 FLUCS current transducer technology
    • Local colour display and interface for monitoring and configuration
    • Internal protections including over voltage and over current protection
    • Optional analog control input for amplifier compatibility

     

  • The Hioki MR6000 Memory HiCorder sets a new benchmark in waveform recording, combining cutting-edge technology, intuitive design, and world-class performance. Built from the ground up, it’s engineered to tackle both current and future measurement challenges with ease and precision.

    Key Features:

    • Large, intuitive touch panel for efficient and user-friendly operation
    • Simultaneous multi-channel isolation measurement at up to 200 MS/s (with High Speed Analog Unit U8976)
    • Significantly faster data saving for a seamless experience
    • Real-time data saving without interrupting ongoing measurements
  • The Hioki Rack-mounted Multi-channel System Recorder (MR8741/MR8740) is a powerful, high-speed, single-device solution for waveform recording and generation. Ideal for test systems, it offers high-resolution, isolated multi-channel measurements with fast sampling capabilities.

    Key Features:

    • Integrated waveform recording and generation in one device
    • Equipped with DVM Unit MR8990 for high-accuracy 24-bit resolution measurements
    • Supports up to 16 channels (MR8741) for multi-channel testing
    • Isolated input between channels and from input to chassis (up to 300 V AC/DC)
    • High-speed sampling up to 20 MS/s
    • Compact rack-mountable design (4U height, under 180 mm depth)
    • Monitor display and setting access via DVI-D and mouse
    • Enables remote measurement and control via LAN
    • Browser-based screen monitoring or advanced control via Hioki 9333 LAN Communicator
  • The Hioki Memory Recorder is a high-speed, fully-isolated data acquisition system designed for precise and simultaneous measurement of multiple analog and logic signals. Ideal for testing, simulation, and system diagnostics, it combines waveform generation and recording in one powerful unit.

    Key Features:

    • Generate and record waveforms using a single device
    • Simulate issues by outputting previously recorded problematic waveforms to test devices
    • Supports 32 analog + 32 logic channels, expandable to 28 analog + 64 logic channels
    • High-speed sampling up to 20 MS/s with fully isolated inputs
    • Ensures safe measurement with complete analog input isolation
    • Equipped with a large-capacity 512M-word memory
    • Simultaneously measures high voltage and ultra-low voltage system signals

     

  • The Memory HiCorder MR8848 is a rugged, high-speed data acquisition recorder designed for capturing critical transient events in demanding industrial and infrastructure environments.

    Key Features

    • Durable, shock-resistant portable design for field use
    • Isolated analog channels for safe multi-system measurements
    • 32 analog and 64 logic channels for complex signal analysis
    • High-speed sampling to capture fast transient waveforms
    • Large-capacity memory for long-duration recording
    • Built-in waveform and numerical analysis for pass or fail judgments
    • Optional on-site printer for secure, tamper-proof documentation

     

  • The Memory HiCorder MR8870 is a compact, high-speed data acquisition recorder designed for waveform observation and RMS variation recording in maintenance and fault analysis applications.

    Key Features

    • Dual recording mode for instantaneous waveforms and RMS variations
    • Two isolated analog channels with 2 MW internal memory
    • Real-time saving of measured values to CF card
    • Synchronize two instruments to record four channels at once
    • High-speed performance up to 1 MS per second
    • Compact handheld design for easy field transport
    • Sharp QVGA TFT wide LCD for clear waveform viewing
    • Ideal for elevator, motor, inverter, and machine diagnostics

     

  • The Memory HiCorder MR8875 is a high-speed, portable data acquisition recorder designed for vehicle testing, performance evaluation, and advanced multichannel measurements.

    Key Features

    • 1000 V direct input with instantaneous DC and RMS measurement
    • Up to 16 to 60 channels with plug-and-play input modules
    • High-speed simultaneous logging down to 2 microseconds
    • Real-time recording directly to SD card for long-term logging
    • 16-bit high-resolution measurement for accurate results
    • Direct CAN bus input for onboard vehicle analysis
    • Built-in FFT and waveform calculation for advanced analysis
    • Intuitive touch screen interface for fast setup and operation
    • Designed to withstand vibration and extreme temperatures

     

  • The Memory HiCorder MR8880 is a rugged, field-ready waveform recorder designed to capture high- and low-voltage signals safely in industrial and maintenance applications.

    Key Features

    • Direct 600 V input for three-phase power measurements
    • CAT III 600 V isolation for safe high-voltage testing
    • Four completely isolated analog channels
    • Simultaneous recording of three-phase systems plus one spare channel
    • Wide operating temperature range from minus 10 to 50 degrees Celsius
    • Shock- and vibration-resistant housing with side protectors
    • Built-in trigger and pre-trigger functions for precise event capture
    • Presets function for fast and consistent setup

     


Showing 1–16 of 49 results