Products

Featuring an ultra-compact 0.35”microLED display with high-brightnessand high-resolution technology,delivering dynamic visuals and seamlessintegration for next-generationautomotive heads-up display (HUD).

Key Features of High Brightness High Resolution 0.35″ Micro-Display:

• OVERVIEWUltra-High Brightness: Engineered to perform in a widerange of lighting conditions, ensuring excellent visibility inboth indoor and outdoor environments.
• Robust Durability: Built to withstand demandingconditions for long-term reliability.
• Ultra-Thin & Lightweight: Designed for seamlessintegration into compact spaces, leveraging microLED’sinherently slim profile without compromisingperformance.
• Power-Efficient Design: Consumes significantly less powercompared to traditional display technologies, extendingbattery life for wearable devices.

The Hioki 3153 HiTESTER is an all-in-one solution for insulation resistance and AC/DC voltage withstand testing. It is fully programmable for automated multi-point testing, making it ideal for industrial, manufacturing, and electrical safety applications.

Key Features

• Programmable insulation testing from 50 V to 1200 V DC
• Dielectric strength testing for AC/DC voltages up to 5 kV
• Store and program up to 32 test files with 50 steps each
• Optional scanner for automatic multi-point testing
• Accurate voltage generation via PWM method, independent of supply voltage
• Ramp timer function for controlled voltage rise/fall during testing
• Digital display of measured voltage, current, and resistance
• Compact design with full remote operation capability

The Hioki 3930 High Voltage Scanner is a passive auxiliary device designed to streamline multi-point high-voltage testing when paired with the Hioki 3153 or a sequencer. Its isolated channels allow safe and efficient AC/DC voltage testing while minimizing connection changes, making it ideal for industrial testing and quality control applications.

Key Features

• Supports AC/DC high-voltage output up to 5 kV
• Multi-point testing: 8 channels per unit, up to 32 channels with 4 connected units
• Fully isolated HV I/O, control lines, and power supply
• Operates in multi-mode or single-mode scanning for flexible testing
• Compatible with Hioki 3153 program function or standard sequencer
• Fast operation with <6 ms response and recovery time
• Includes HV test leads, control connector cable, and grounding cable

The Hioki BT5525 Tester is engineered for battery production lines to detect microscopic insulation defects and contamination before shipment. It ensures safety, reduces false negatives, and accelerates high-speed testing, making it ideal for modern battery manufacturing.

Key Features

• Proprietary BDD function detects minuscule internal short-circuits caused by contamination
• Stable insulation resistance testing even in noisy environments
• Contact check function prevents erroneous judgments
• Maximum test voltage of 500 V for battery cell, module, and pack testing
• High-speed charging up to 50 mA and discharging up to 40 mA for faster testing
• Compact design allows integration into battery production systems
• Cost-effective solution for small to large battery cells and packs
• PC application for waveform review and CSV data export

The Hioki IR5050 High Voltage Insulation Tester delivers precise and reliable insulation resistance testing up to 5 kV and 10 TΩ. Designed for professionals, it offers advanced diagnostics, wireless connectivity, and rugged durability — making it ideal for industrial maintenance and electrical testing.

Key Features:

• Measures insulation resistance up to 10 TΩ
• Test voltages from 250 V to 5000 V DC
• Calculates and displays PI, DAR, and DD diagnostics automatically
• Supports both wireless (Bluetooth) and USB data transfer
• Compact, lightweight design with IP65-rated carrying case
• Step and ramp voltage testing for advanced insulation analysis
• CAT IV and CAT III safety ratings for enhanced protection
• Compatible with GENNECT Cross app for real-time reporting

Key Features:

• Safely measure solar PV insulation resistance while generating power
• CAT III 2000 V and CAT IV 1000 V safety rating for reliable high-voltage testing
• 5 kV test voltage and 10 TΩ insulation resistance range
• Specialized PV insulation measurement mode compliant with IEC 62446-1
• Automatically calculates and displays PI, DAR, and DD diagnostics
• Flexible voltage adjustment from 250 V to 5000 V
• Data memory with wireless and USB connectivity options
• Compact, lightweight design with IP65-rated carrying case for durability

Key Features:

• Fastest insulation tester in the industry with results in as little as 50 ms
• Wide test voltage range: 25 V to 1000 V with 1 V resolution
• Quick residual voltage discharge for faster takt times
• Contact check function prevents false readings from poor connections
• Short-circuit check detects micro-shorts before testing
• Built-in LAN and RS-232C for system integration
• Compact, lightweight design ideal for battery and production line testing
• Models available: ST5520 (I/O output) and ST5520-01 (BCD output)

The Memory HiCorder MR8848 is a rugged, high-speed data acquisition recorder designed for capturing critical transient events in demanding industrial and infrastructure environments.

Key Features

• Durable, shock-resistant portable design for field use
• Isolated analog channels for safe multi-system measurements
• 32 analog and 64 logic channels for complex signal analysis
• High-speed sampling to capture fast transient waveforms
• Large-capacity memory for long-duration recording
• Built-in waveform and numerical analysis for pass or fail judgments
• Optional on-site printer for secure, tamper-proof documentation

The Memory HiCorder MR8870 is a compact, high-speed data acquisition recorder designed for waveform observation and RMS variation recording in maintenance and fault analysis applications.

Key Features

• Dual recording mode for instantaneous waveforms and RMS variations
• Two isolated analog channels with 2 MW internal memory
• Real-time saving of measured values to CF card
• Synchronize two instruments to record four channels at once
• High-speed performance up to 1 MS per second
• Compact handheld design for easy field transport
• Sharp QVGA TFT wide LCD for clear waveform viewing
• Ideal for elevator, motor, inverter, and machine diagnostics

The Memory HiCorder MR8875 is a high-speed, portable data acquisition recorder designed for vehicle testing, performance evaluation, and advanced multichannel measurements.

Key Features

• 1000 V direct input with instantaneous DC and RMS measurement
• Up to 16 to 60 channels with plug-and-play input modules
• High-speed simultaneous logging down to 2 microseconds
• Real-time recording directly to SD card for long-term logging
• 16-bit high-resolution measurement for accurate results
• Direct CAN bus input for onboard vehicle analysis
• Built-in FFT and waveform calculation for advanced analysis
• Intuitive touch screen interface for fast setup and operation
• Designed to withstand vibration and extreme temperatures

The Memory HiCorder MR8880 is a rugged, field-ready waveform recorder designed to capture high- and low-voltage signals safely in industrial and maintenance applications.

Key Features

• Direct 600 V input for three-phase power measurements
• CAT III 600 V isolation for safe high-voltage testing
• Four completely isolated analog channels
• Simultaneous recording of three-phase systems plus one spare channel
• Wide operating temperature range from minus 10 to 50 degrees Celsius
• Shock- and vibration-resistant housing with side protectors
• Built-in trigger and pre-trigger functions for precise event capture
• Presets function for fast and consistent setup

The Pulse Generator MR8791 is a plug-and-play input module for Hioki Memory HiCorders, designed for precise control simulation testing of electronic control systems.

Key Features

• Outputs pulse and pattern waveforms on up to eight channels
• Supports TTL level and open-collector output signals
• Designed for control simulation testing of ECUs and control boards
• Suitable for engine, airbag, brake, and power steering systems
• Wide frequency range for pulse and logic pattern generation
• Built-in self-test function for reliable operation
• Isolated design between unit and output channels
• Compact form factor for laboratory and test bench integration

Showcasing a large 10” panel withultra-bright, energy-efficientmicroLED technology, deliveringdynamic visuals and seamlessintegration for next-generationintelligent vehicles.

Ket Features:

• OVERVIEWUltra-High Brightness: Engineered to perform in a widerange of lighting conditions, ensuring excellent visibility inboth indoor and outdoor environments.
• Robust Durability: Built to withstand demandingconditions for long-term reliability.
• Ultra-Thin & Lightweight: Designed for seamlessintegration into compact spaces, leveraging microLED’sinherently slim profile without compromisingperformance.
• Vibrant RGB Color Reproduction: Delivers rich, high-contrast visuals with precise color accuracy, enhancingvisuals for display applications.

Advancing automotive displayswith ultra-bright, energy-efficientmicroLED technology, enablingdynamic visuals and seamlessintegration for next-generationintelligent vehicles.

Key Features:

• OVERVIEWUltra-High Brightness: Engineered to perform in a widerange of lighting conditions, ensuring excellent visibility inboth indoor and outdoor environments.
• Robust Durability: Built to withstand demandingconditions for long-term reliability.
• Ultra-Thin & Lightweight: Designed for seamlessintegration into compact spaces, leveraging microLED’sinherently slim profile without compromisingperformance.
• Vibrant RGB Color Reproduction: Delivers rich, high-contrast visuals with precise color accuracy, enhancingvisuals for display applications.

Revolutionizing automotivelighting with ultra-bright, energy-efficient microLED displays,enabling adaptive illuminationand seamless integration for next-generation intelligent vehicles.

Key Features:

• OVERVIEWUltra-High Brightness: Engineered to perform in a widerange of lighting conditions, ensuring excellent visibility inboth indoor and outdoor environments.
• Robust Durability: Built to withstand demandingconditions for long-term reliability.
• Ultra-Thin & Lightweight: Designed for seamlessintegration into compact spaces, leveraging microLED’sinherently slim profile without compromisingperformance.
• Segment-Driven Intelligence: Enables optimal messagingthrough precisely controlled lighting segments, enhancingintelligent lighting capabilities for smart automotiveapplications and other high-performance devices.

Transforming automotive lightingwith ultra-bright, energy-efficientmicroLED displays, deliveringprecision illumination andseamless integration for next-generation vehicles.

Key Features:

• OVERVIEWUltra-High Brightness: Engineered to perform in a widerange of lighting conditions, ensuring excellentvisibility in both indoor and outdoor environments.
• Robust Durability: Built to withstand demandingconditions for long-term reliability.
• Ultra-Thin & Lightweight: Designed for seamlessintegration into compact spaces, leveraging microLED’sinherently slim profile without compromisingperformance.
• Power-Efficient Design: Consumes significantly lesspower compared to traditional display technologies.