Products

The FMC-MOTDRV22 Motor Driver is a cost efficient dual channel stepper motor control board designed for systems that require reliable motion control within an FPGA based environment. Built according to the ANSI VITA 57.1 FMC standard, this mezzanine card enables precise control of bipolar stepper motors while providing integrated diagnostics and protection features. With programmable chopper modes, motor load detection, and flexible voltage options, the FMC-MOTDRV22 Motor Driver offers a dependable solution for automation, instrumentation, and scientific motion control systems.

Key Features

• Dual channel stepper motor driver design
• Compatible with ANSI VITA 57.1 FMC standard carrier boards
• Supports bipolar stepper motors for precision motion control
• Maximum output up to 12 V or 24 V at 1.8 A per coil depending on model
• Programmable chopper slope with three operating modes
• Integrated motor load detection without external sensors
• Load dependent current control for efficient motor operation
• Diagnostic monitoring and system protection features
• Protection against overcurrent, short to ground, undervoltage and overheating
• Encoder interface support for motor position monitoring
• Flexible configuration with internal or external power supply options
• Dedicated cabling solutions available for easy installation

The FMC-PICO-1M4 Ammeter is a high precision four channel current measurement board designed for accurate monitoring of very low bipolar currents in advanced electronic systems. Built as a Low Pin Count FPGA Mezzanine Card compliant with the VITA 57.1 FMC standard, this module combines high resolution data acquisition with low latency performance. With 20 bit resolution and sampling speeds up to 1 MSPS, the FMC-PICO-1M4 Ammeter provides reliable current monitoring for scientific instrumentation, accelerator systems, and precision measurement environments.

Key Features

• Four channel high precision floating ammeter design
• 20 bit resolution analog to digital conversion
• Sampling rate up to 1 MSPS for fast data acquisition
• Independent and simultaneous sampling for each channel
• Multiple measurement ranges depending on board version
• Bipolar current measurement capability
• Floating input channels up to ±300 V relative to FMC ground
• Low noise analog front end for precise measurements
• Minimal temperature dependence for stable performance
• Optional factory calibration with EEPROM stored calibration data
• External trigger support for synchronized acquisition
• Separate SPI communication links for each channel
• Compatible with VITA 57.1 FMC Low Pin Count carrier boards

The FPP2.3-M Manual Field Probe Positioner is a precise manual height adjustment system for electromagnetic field probes, designed for uniform field calibration in EMC testing environments.

Key Features:

• Manual height adjustment: 0.2 – 2.3 m
• Maximum load capacity: 3 kg
• Total height: 2.5 m
• Fabricated from PVC and reinforced fiberglass, fully non-metallic
• Base dimensions: 0.5 m × 0.5 m with movable wheels
• Lightweight and portable: approx. 10 kg
• Compliant with EN61000-4-3 and IEC61000-4-3 standards
• Ideal for uniform field calibration and precise field probe positioning

The FPP2.3/1.5 M Field Probe Positioner is a high-precision, remote-controlled axial system designed for fast and automated electromagnetic field measurements.

Key Features:

• Remote-controlled horizontal movement for single-axis operation
• Moves 4 probes to 4 positions for rapid 16-point calibration
• Automates uniform field calibration (UFA) per EN61000-4-3 / IEC61000-4-3
• Load capacity: 3 kg
• Adjustable positioning speed (1–35 cm/s)
• High accuracy: ±0.5 cm
• Durable construction: plastic & reinforced fiberglass, minimal metal parts
• LAN (TCP/IP) interface for full remote operation
• Compatible with FCU 3.0 or NCD Controller

Key Features

• Fully integrated battery test system with cycler, chamber, and controls
• Pre-configured AES chambers and MACCOR cyclers for turnkey operation
• No integration required, ready for immediate deployment
• Supports R&D, cycle life, performance validation, and abuse testing
• Wide current range from microamp-level to 3,200 A total system capacity
• Channel scalability from 1 to 192 channels for flexible testing needs
• Compatible with cylindrical, pouch, prismatic cells, modules, and packs
• Energy-efficient regenerative testing with up to 90% energy recovery
• Temperature control range from -20 °C to +80 °C with automotive options
• Unified software, safety systems, and pre-wired setup included

Compact, versatile, and efficient, the FX Series is ideal for test labs, R&D, and educational use.

Key Features:

• PowerFlex autoranging outputs (up to 105W per channel)
• Dual or triple output models (210W or 246W total)
• SELV compliant and high safety design
• Rotary, touch, and USB control options
• Low ripple noise (<2mV), high resolution (1mV/1mA)
• Voltage tracking and simultaneous V/I control
• Remote USB interface with SCPI protocol
• 25 user-defined memory presets
• Switchable remote sense & intelligent cooling
• Includes Test Bridge software for logging & automation

Gas Chillers are designed for precise and efficient cooling of nitrogen, argon, and clean dry air in demanding process applications. Built for reliability and flexibility, these systems deliver ultra-low temperatures with fast response times.

Key Features

• Cooling capability down to -95°C
• Supports nitrogen, argon, air, and clean dry air
• Open loop and closed loop configurations available
• Fast temperature transitions for process efficiency
• No LN2 or LCO2 required for operation
• Auto cascade and cryogenic cooling options
• Advanced control for consistent performance
• Designed for industrial and high precision applications
• Compliant with global industry standards

High-performance analyzer for compliance testing to EN61000-3-2 and EN61000-3-3 with real-time harmonic and waveform data display.

Key Features:

• Complies with EN61000-3-2 and EN61000-3-3 standards
• Measures rms/peak voltage & current, power, PF, phase
• Histogram display for 40 harmonics
• Voltage & current waveform visualization
• Real-time graphical updates for live analysis
• High-contrast 320 x 240 pixel LCD
• USB, RS232, and printer interfaces
• HA-PC-Link+ software included for full PC control
• Available with UK, Schuko, or US sockets

A turnkey solution for harmonics and flicker compliance, this system delivers powerful, efficient, and automated testing for today’s high-power demands.

Key Features:

• Fully compliant with IEC/EN 61000-3-2, -3-3, -3-11, and -3-12
• High-power testing up to 75 A and 50 kVA
• Regenerative AC power supply with energy recovery
• Programmable simulation: voltage, frequency, harmonics, interharmonics
• Precision impedance network for accurate flicker measurements
• Advanced power analyzer with harmonic and flicker metering
• Preloaded test sequences with automated software control
• Expandable to include dips, swells, and short interruptions

HDA125 High-Speed Digital Analyzer brings advanced logic analysis capabilities to your existing Teledyne LeCroy oscilloscopes. Compact, accurate, and versatile.

Key Features:

• 12.5 GS/s sample rate for high-speed digital capture
• Supports up to 18 digital channels
• Compatible with WaveMaster/SDA 8 Zi-B and LabMaster 10Zi-A oscilloscopes
• QuickLink Probe System for fast, low-impact signal access
• 3 GHz bandwidth and 80 ps timing accuracy
• Command bus decoding for in-depth DDR/LPDDR memory debugging
• Minimal signal loading with 110 kΩ, 0.12 pF tip impedance
• Cost-effective QuickLink solder-in tips simplify multi-point testing
• Ideal for mixed-signal, high-speed, and memory interface debugging

Featuring an ultra-compact 0.35”microLED display with high-brightnessand high-resolution technology,delivering dynamic visuals and seamlessintegration for next-generationautomotive heads-up display (HUD).

Key Features of High Brightness High Resolution 0.35″ Micro-Display:

• OVERVIEWUltra-High Brightness: Engineered to perform in a widerange of lighting conditions, ensuring excellent visibility inboth indoor and outdoor environments.
• Robust Durability: Built to withstand demandingconditions for long-term reliability.
• Ultra-Thin & Lightweight: Designed for seamlessintegration into compact spaces, leveraging microLED’sinherently slim profile without compromisingperformance.
• Power-Efficient Design: Consumes significantly less powercompared to traditional display technologies, extendingbattery life for wearable devices.

The Hioki 3153 HiTESTER is an all-in-one solution for insulation resistance and AC/DC voltage withstand testing. It is fully programmable for automated multi-point testing, making it ideal for industrial, manufacturing, and electrical safety applications.

Key Features

• Programmable insulation testing from 50 V to 1200 V DC
• Dielectric strength testing for AC/DC voltages up to 5 kV
• Store and program up to 32 test files with 50 steps each
• Optional scanner for automatic multi-point testing
• Accurate voltage generation via PWM method, independent of supply voltage
• Ramp timer function for controlled voltage rise/fall during testing
• Digital display of measured voltage, current, and resistance
• Compact design with full remote operation capability

The Hioki 3930 High Voltage Scanner is a passive auxiliary device designed to streamline multi-point high-voltage testing when paired with the Hioki 3153 or a sequencer. Its isolated channels allow safe and efficient AC/DC voltage testing while minimizing connection changes, making it ideal for industrial testing and quality control applications.

Key Features

• Supports AC/DC high-voltage output up to 5 kV
• Multi-point testing: 8 channels per unit, up to 32 channels with 4 connected units
• Fully isolated HV I/O, control lines, and power supply
• Operates in multi-mode or single-mode scanning for flexible testing
• Compatible with Hioki 3153 program function or standard sequencer
• Fast operation with <6 ms response and recovery time
• Includes HV test leads, control connector cable, and grounding cable

Key Features:

• Fully automated battery testing for large packs up to 300 V
• Simultaneous measurement of internal resistance (AC-IR) and open-circuit voltage (OCV)
• Wide resistance range: 3 mΩ to 3.1 kΩ with 0.1 μΩ resolution
• Voltage measurement ranges: 6 V, 60 V, and 300 V with high precision
• Equipped with LAN interface for production line integration
• Fast, accurate AC four-terminal method
• Resistant to static electricity (±30 kV contact discharge)
• Ideal for high-voltage pack inspection and quality control

Key Features:

• Fully automated battery testing for small cells and packs up to 60 V
• Simultaneous measurement of internal resistance (AC-IR) and open-circuit voltage (OCV)
• Wide resistance range: 0 Ω to 3.1 kΩ with 1 μΩ resolution
• Voltage measurement ranges: 6 V and 60 V with high precision
• Equipped with LAN interface for integration with production lines
• Rapid measurement using AC four-terminal method
• Highly resistant to static electricity (±30 kV contact discharge)

Key Features:

• Fully automated battery testing for large cells and mid-sized packs up to 100 V
• Simultaneous measurement of internal resistance (AC-IR) and open-circuit voltage (OCV)
• Wide resistance range: 3 mΩ to 3.1 kΩ with 0.1 μΩ resolution
• Voltage measurement ranges: 6 V, 60 V, and 100 V with high precision
• Equipped with LAN interface for production line integration
• Fast, accurate AC four-terminal method
• Resistant to static electricity (±30 kV contact discharge)
• Ideal for production, shipping inspection, and quality control