1 800 665 7301 | info@tmetrix.com

  • Key Features Provide Application Versatility

    • USB, LAN (LXI), IEEE-488.2 and RS-232C with SCPI compatibility
    • Compatible with PPSC Studio graphical user interface
    • LabVIEW for Windows®/LabWindows® drivers
    • Waveform Creation by Harmonic Synthesis
    • Waveform Capture (Voltage and Current)
    • Harmonic Analysis (Voltage and Current)
    • Metering of RMS and Peak Values
    • Continuous Self Calibration (CSC)
    • Line Sync
    • 6:1 Peak Current Capability
    • Low Impedance for EN61000-3-2, 3 Testing
    • Programmable Output Impedance
    • Up to 0-300 VAC Direct Coupled Out
    • 1 Phase / 3 Phase Switch Selectable
    • 15-5000 Hz Full Power Bandwidth
    • Power Levels from 500 VA to 6 kVA standard; 30kVA optional
    • Externally Referenced Meter Calibration
    • CE Safety & EMC and NTRL Safety Mark

     

  • The AZX Series (Regenerative AC / DC Power Source) is a family of high power, single, split and three phase, AC, DC and AC+DC output capable Power Sources with full energy recovery to the AC mains when sinking power from the equipment under test. Available models range from 30 kVA to 440 kVA. Using a modern color touch screen based user interface for ease of use, the AZX Series is cost effective and fully programmable for both basic frequency conversion and advanced AC power line or DC power disturbance test applications requiring up to 1000 Hz fundamental frequency.

    The energy recovery capability allows both sourcing and sinking of current and power up to 100% of rated power. Adding the Load Option (Option L) adds full electronic regenerative AC & DC Load programming capability to the AZX.

     

    • 3GHz RF analog signal generator
    • AM, FM, PM, Sweep & Pulse Modulation
    • Exceptionally Low Phase Noise of -145dBc/Hz @100MHz and 10@kHz offset
    • Field ready, with 10” touch screen suited for day and night use and 2 hour battery operation
    • Remotely programmable via MATLAB, Python, LabVIEW and other software programming environments.
    • Removable uSD card for instrument security

     

    • High voltage output to 300Vp-p (±150V)
    • Output current to 150 mA
    • Full power bandwidth from DC to >500kHz
    • Slew rate to 200V/µs
    • Low distortion
    • Low cost
    • Custom Configuration of gain and signal Ground

     

    • Single channel
    • High voltage output to 400Vp-p (±200V)
    • Output current to 125 mA
    • Full power bandwidth from DC to >500kHz
    • Slew rate to 400V/µs
    • Monitor Output
    • Precise signal amplification for multiple applications
    • Compatible with any of the Tabor waveform generators

     

    • High voltage output to 300Vp-p (±150V)
    • Output current to 100 mA per channel
    • Full power bandwidth from DC to >500kHz
    • Slew rate to 200V/µs
    • Low distortion
    • Low cost
    • Custom Configuration of: Gain, Signal Ground

     

    • 12GHz RF Analog Signal Generator
    • Extremely fast switching speed of <100μs
    • AM, FM, PM Sweep & Pulse Modulation
    • Extra small, compact module platform
    • Exceptionally Low Phase Noise of -145dBc/Hz @100MHz and 10@kHz offset
    • SPI and micro-USB integrated interfaces
    • Remotely programmable via MATLAB, Python, LabVIEW
    • and other software programming environments.
    • Flixible modular platform for OEM and custom requirements
    • and applications, to satisfy specific customer demands.
    • Multi instrument synchronization capability

     

    • 3 GHz RF Analog Signal Generator
    • Extremely fast switching speed of <100μs
    • AM, FM, PM Sweep & Pulse Modulation
    • Extra small, compact module platform
    • Exceptionally Low Phase Noise of -145dBc/Hz @100MHz and 10@kHz offset
    • SPI and micro-USB integrated interfaces
    • Remotely programmable via MATLAB, Python, LabVIEW
    • and other software programming environments.
    • Flixible modular platform for OEM and custom requirements
    • and applications, to satisfy specific customer demands.
    • Multi instrument synchronization capability

     

    • 6GHz RF Analog Signal Generator
    • Extremely fast switching speed of <100μs
    • AM, FM, PM Sweep & Pulse Modulation
    • Extra small, compact module platform
    • Exceptionally Low Phase Noise of -145dBc/Hz @100MHz and 10@kHz offset
    • SPI and micro-USB integrated interfaces
    • Remotely programmable via MATLAB, Python, LabVIEW
    • and other software programming environments.
    • Flixible modular platform for OEM and custom requirements
    • and applications, to satisfy specific customer demands.
    • Multi instrument synchronization capability

     

  • Key Performance Capabilities:

    • Slew rates up to 60 V/µsec.
    • Up to 240A DC at +50VDC or –50VDC (4301-240 configuration).
    • Can provide pulses of up to 800 amps at voltages of up to ±100V (4301-240 configuration).
    • Adjustable compensation allows the system to maintain a 50V/2 µsec rise-time over a wide range of current outputs.

     

  • Key Performance Capabilities:

    • Bandwidth: DC to 50 kHz
    • Voltage: 0 to 250 VRMS; 0 to 350 VDC
    • Current: 100 to 500 ARMS
    • Distortion: 0.1%
    • Power: 4 kW to 20 kW*Power levels up to 5X rated power when driving reactive loads
    • High power efficiency and density

    *Models available with output from 4 kW to 20 kW (capable of up to 125 kVA).

     

  • Key Performance Capabilities:

    • 4-Quadrant – Can source and sink current
    • ±80V – DC supply for 12V to 48V systems; meets 80V surge requirements
    • 300 kHz Sine – DC ripple tests for all major standards
    • 3µs Rise Time – Exceeds surge and dropout slew rate requirements
    • 3mΩ DC Source Impedance – Out-performs ISO 7637-2 requirements
    • Supports ground reference and supply offset testing required for ISO 16750-2 Sect. 4.8 and other similar standards

     

  • High‐Resolution Portable TDR with Frequency‐Domain Analysis Tools

    Ideal for testing all types of microwave/RF and digital cables and connectors

    • Rugged portable TDR with S‐parameter tools
    • Resolves connector detail (<1 cm)
    • 75 μm (0.003 in.) cursor resolution
    • 16‐bit digital sampling at up to 250 KSPS
    • Stores thousands of TDR traces
    • USB host/client, 10/100 Ethernet
    • Lightweight, bright color screen
    • Internet streaming and remote control

     

  • Simplify Aging Aircraft Wiring Maintenance Using High-Resolution MOHR CT100 Series TDR Cable Analyzers

    • Designed for use with the high-resolution CT100 TDR Cable Tester
    • Ideal for TDR testing MIL-STD-1553B data bus aerospace cable assemblies
    • Detect and localize open, short, and partial cable and connector faults on the main bus and stubs
    • Detects cable and connector faults through 3+ transformer couplers
    • Simplifies troubleshooting of aging aircraft MIL-STD-1553 cable assemblies

     

    • 12GHz RF analog signal generator
    • AM, FM, PM, Sweep & Pulse Modulation
    • Exceptionally Low Phase Noise of -145dBc/Hz @100MHz and 10@kHz offset
    • Field ready, with 10” touch screen suited for day and night use and 2 hour battery operation
    • Remotely programmable via MATLAB, Python, LabVIEW and other software programming environments.
    • Removable uSD card for instrument security

     

    • 6GHz RF analog signal generator
    • AM, FM, PM, Sweep & Pulse Modulation
    • Exceptionally Low Phase Noise of -145dBc/Hz @100MHz and 10@kHz offset
    • Field ready, with 10” touch screen suited for day and night use and 2 hour battery operation
    • Remotely programmable via MATLAB, Python, LabVIEW and other software programming environments.
    • Removable uSD card for instrument security