HIOKI E E CORPORATION

The Hioki Impedance Analyzer IM7587 3 GHz provides precision, speed, and versatility for impedance measurements from 1 MHz to 3 GHz, ideal for both R&D and mass production applications in electronic component testing.

Key Features:

• Frequency range: 1 MHz to 3 GHz
• Test speed: 0.5 ms
• Measurement variability: 0.07%
• Basic accuracy: ±0.65% reading
• RF I-V measurement technique
• Compact half-rack design with palm-sized test head
• Robust contact check capabilities
• Analyzer mode: frequency and level sweeps, time interval measurements

The Memory HiCorder MR8848 is a rugged, high-speed data acquisition recorder designed for capturing critical transient events in demanding industrial and infrastructure environments.

Key Features

• Durable, shock-resistant portable design for field use
• Isolated analog channels for safe multi-system measurements
• 32 analog and 64 logic channels for complex signal analysis
• High-speed sampling to capture fast transient waveforms
• Large-capacity memory for long-duration recording
• Built-in waveform and numerical analysis for pass or fail judgments
• Optional on-site printer for secure, tamper-proof documentation

The Memory HiCorder MR8870 is a compact, high-speed data acquisition recorder designed for waveform observation and RMS variation recording in maintenance and fault analysis applications.

Key Features

• Dual recording mode for instantaneous waveforms and RMS variations
• Two isolated analog channels with 2 MW internal memory
• Real-time saving of measured values to CF card
• Synchronize two instruments to record four channels at once
• High-speed performance up to 1 MS per second
• Compact handheld design for easy field transport
• Sharp QVGA TFT wide LCD for clear waveform viewing
• Ideal for elevator, motor, inverter, and machine diagnostics

The Memory HiCorder MR8875 is a high-speed, portable data acquisition recorder designed for vehicle testing, performance evaluation, and advanced multichannel measurements.

Key Features

• 1000 V direct input with instantaneous DC and RMS measurement
• Up to 16 to 60 channels with plug-and-play input modules
• High-speed simultaneous logging down to 2 microseconds
• Real-time recording directly to SD card for long-term logging
• 16-bit high-resolution measurement for accurate results
• Direct CAN bus input for onboard vehicle analysis
• Built-in FFT and waveform calculation for advanced analysis
• Intuitive touch screen interface for fast setup and operation
• Designed to withstand vibration and extreme temperatures

The Memory HiCorder MR8880 is a rugged, field-ready waveform recorder designed to capture high- and low-voltage signals safely in industrial and maintenance applications.

Key Features

• Direct 600 V input for three-phase power measurements
• CAT III 600 V isolation for safe high-voltage testing
• Four completely isolated analog channels
• Simultaneous recording of three-phase systems plus one spare channel
• Wide operating temperature range from minus 10 to 50 degrees Celsius
• Shock- and vibration-resistant housing with side protectors
• Built-in trigger and pre-trigger functions for precise event capture
• Presets function for fast and consistent setup

The Pulse Generator MR8791 is a plug-and-play input module for Hioki Memory HiCorders, designed for precise control simulation testing of electronic control systems.

Key Features

• Outputs pulse and pattern waveforms on up to eight channels
• Supports TTL level and open-collector output signals
• Designed for control simulation testing of ECUs and control boards
• Suitable for engine, airbag, brake, and power steering systems
• Wide frequency range for pulse and logic pattern generation
• Built-in self-test function for reliable operation
• Isolated design between unit and output channels
• Compact form factor for laboratory and test bench integration

The SM7120 Super Megohm Meter provides rapid, ultra-low current and high-resistance measurement, making it perfect for automated production lines, high-voltage applications, and precise testing of electronic components, EV parts, and insulation materials. Its 2000 V output, exceptional noise resistance, and flexible design ensure reliable, repeatable measurements even in complex environments.

Key Features

• 6.4 ms high-speed measurement including contact check
• Maximum 2000 V output for high-voltage testing
• 0.1 fA ultra-low current resolution for precise detection
• 2 × 10¹⁹ Ω maximum display range
• 300x improved noise resistance for stable results
• Built-in EXT I/O, RS-232C, GP-IB, and USB connectivity
• Multipurpose functionality: Electrometer, Picoammeter, IR Meter
• Ideal for electronic components, EVs, wearables, and insulation testing

The SM7420 Super Megohm Meter offers ultra-low current measurement with 4-channel simultaneous testing, making it ideal for automated production lines and high-precision inspection of passive components like capacitors and filters. Its advanced noise resistance, channel-independent contact checks, and multiple connectivity options ensure accurate, repeatable, and high-speed performance for mass production.

Key Features

• Four-channel ultra-low current measurement with 0.1 fA resolution
• Industry-leading noise resistance, 300x better than previous models
• High-speed testing: 6000 ps/minute for mass production efficiency
• Channel-independent low-capacitance contact check
• Built-in EXT I/O, RS-232C, GP-IB, and USB connectivity
• Ideal for automated MLCC leakage current inspection lines
• Supports integration into automated production systems

The SW2001 High Voltage Multiplexer is a durable and reliable solution designed to simplify complex motor testing setups. It allows safe and seamless switching between high voltage testing and 4 terminal low voltage measurements, helping manufacturers improve efficiency, accuracy, and equipment protection across production lines.

Key Features

• Consolidates six motor tests into one multiplexer system
• Enables safe switching between high voltage and low voltage measurements
• Supports resistance, inductance, surge, hipot, insulation resistance, and partial discharge tests
• Available in 4, 8, and 16 channel configurations
• Reduces test time and manual reconnections
• Protects low voltage instruments from stored energy damage
• Designed for long service life with high durability relays

The VIR Generator U8794 is a high-precision signal generation unit designed to simulate sensor outputs for ECU inspection, component testing, and maintenance applications.

Key Features

• Generates DC voltage, DC current, and resistance simulation signals
• Ideal for ECU inspection, electronic component testing, and equipment maintenance
• Eight fully isolated output channels for safe multi-signal simulation
• High-accuracy resistance simulation with automatic current calculation
• Designed exclusively for use with Memory HiCorder MR8740 series
• Supports sensor simulation testing without physical sensors
• Compact and lightweight design for bench and field environments

The Waveform Generator U8793 is a plug-and-play module for Hioki Memory HiCorders that enables arbitrary waveform output and anomaly simulation for advanced testing scenarios.

Key Features

• Outputs arbitrary waveform signals on up to two channels
• Reproduces waveforms recorded with a Memory HiCorder up to 15 V
• Generates customized arbitrary waveforms up to 15 V output
• Built-in function generator and sweep function
• Isolated design between unit and outputs and between channels
• Supports anomaly simulation and scenario-based testing
• Includes Waveform Maker software for easy waveform creation
• Designed for use with compatible Hioki Memory HiCorder models

Pencil-style Pocket Digital Multimeter for General Electrical Maintenance, Testing and Hobbyists

Key Features:

• Test lead and main unit in a single body
  
• Overload protection to 600 V at resistance or continuity functions
  
• LED light brightly illuminates test points

• Maximum safety in the field by absolutely preventing short-circuit accidents with fused measurement terminals and current-limiting resistor
• ±0.3% DC V basic accuracy, wide 40 Hz to 1 kHz AC V frequency characteristics
• Low-pass filter (100 Hz/ 500 Hz) cuts high harmonics (when measuring inverter fundamental waveforms)
• Connect to PC with USB communication function (optional)
• Broad -25°C (-13°F) to 65°C (149°F) operating temperature range CAT IV 600 V, CAT III 1000 V