Tabor Electronics Ltd. Archives

Quick View
Tabor Electronics Ltd. 3180 PXI Amplifier
The Tabor 3180 PXI Amplifier is a high-voltage, wideband PXI signal amplifier designed to boost your waveform generator output with precision and safety. Capable of delivering up to 180Vp-p with a 150mA output current, it supports large signal bandwidths up to 300kHz and small signal bandwidths up to 1MHz. The 3180 features selectable gain, a fast 120V/µs slew rate, and a safety latch with visual indicators to ensure secure operation. Compact and cost-effective, this PXI card integrates seamlessly into PXI test systems, providing reliable high-voltage amplification for automotive, defense, aviation, and industrial applications.

Key Features
- Single-width PXI slot design
- High-voltage output: up to 180Vp-p (±90V)
- Output current up to 150mA
- Large signal bandwidth up to 300kHz
- Small signal bandwidth up to 1MHz
- Fast slew rate: 120V/µs
- Selectable gain configuration (up to x50)
- Compatible with Tabor waveform generators
- Safety latch and visual indicator for high-voltage operations
- Compact, cost-effective PXI solution for versatile applications
Learn More
Quick View
Tabor Electronics Ltd. 3201 PXIe RF Amplifier
The Tabor 3201 PXIe RF Amplifier is a high-frequency, high-power RF amplifier designed to extend the output of PXIe-based signal sources. Operating from 100 kHz to 20 GHz, it delivers up to +30dBm power into 50Ω, making it ideal for demanding RF, multi-tone, and general electronics applications. Its compact single-slot PXIe design supports cascading for up to 25 dB gain. Equipped with reverse polarity and over/under-voltage protection, the 3201 ensures safe, reliable operation in laboratory and industrial setups.

Key Features
- PXIe single-slot form factor
- Ultra-wide bandwidth: 100 kHz to 20 GHz
- High output power: +30dBm typ. @ P1dB
- Cascade channels for up to 25 dB gain
- Reverse polarity protection
- Over/under-voltage protection
- Ideal for RF, multi-tone, and scientific applications
- Compact and cost-effective solution
- Compatible with Tabor waveform and RF signal generators
Learn More
Quick View
Tabor Electronics Ltd. 3202 PXIe RF Amplifier
The Tabor 3202 PXIe RF Amplifier is a high-power, dual-channel RF amplifier designed for PXIe systems, operating from 100 kHz to 20 GHz. It provides up to +30dBm output into 50Ω and allows channel cascading for up to 25 dB gain, making it ideal for high-frequency, multi-tone, and demanding RF applications. Equipped with reverse polarity and over/under-voltage protection, the 3202 ensures safe and reliable amplification in laboratory and industrial environments.

Key Features
- PXIe single-slot dual-channel form factor
- Ultra-wide bandwidth: 100 kHz to 20 GHz
- High output power: +30dBm typical @ P1dB
- Cascade channels for up to 25 dB gain
- Reverse polarity protection
- Over/under-voltage protection
- Ideal for RF, multi-tone, and scientific applications
- Compact and cost-effective solution
- Compatible with Tabor waveform and RF signal generators
Learn More
Quick View
Tabor Electronics Ltd. 3222 PXIBus Amplifier
The Tabor 3222 PXIBus Amplifier is a high-performance PXI-based signal amplifier designed for precise, high-voltage signal amplification. Operating from DC up to 20 MHz, it delivers up to 40Vp-p into high impedance with extremely low distortion. The 3222 supports customizable gain, input/output impedance, polarity, and floating or grounded operation, making it ideal for automotive, aviation, and general laboratory applications.

Key Features
- Single-width PXI card, 3U form factor
- Wideband range: DC to 20 MHz
- High amplitude: 40Vp-p into high impedance
- Extremely low distortion
- Fixed x10 gain, custom gain available
- Configurable input/output impedance and polarity
- Floating or grounded signal operation
- Efficient PXI power usage with +5V only draw
- Compact and cost-effective solution for PXI systems
Learn More
Quick View
Tabor Electronics Ltd. 3322 PCIBus Amplifier
The Tabor 3322 PCIBus Amplifier is a high-performance PCI-based signal amplifier built for precision high-voltage amplification. It operates from DC up to 20 MHz, providing up to 40Vp-p into high impedance with ultra-low distortion. The 3322 supports configurable gain, input/output impedance, polarity, and floating or grounded operation, making it ideal for automotive, aerospace, and laboratory applications.

Key Features
- Single-slot, 3U PCI card
- Wideband range: DC to 20 MHz
- High amplitude: 40Vp-p into high impedance
- Extremely low distortion
- Fixed x10 gain, customizable without signal degradation
- Configurable input/output impedance and polarity
- Floating or grounded signal operation up to 250VDC
- Efficient PCI power usage with +5V only draw
- Compact and cost-effective solution for PCI systems
Learn More
Quick View
Tabor Electronics Ltd. 9100 Signal Amplifier
The 9100 Signal Amplifier from Tabor Electronics is a high-voltage, wide-bandwidth amplifier designed for high-precision signal amplification. Its compact 2U half-rack form factor provides flexibility for bench-top or rack-mounted setups, delivering superior signal purity from DC to over 500 kHz. Ideal for amplifying waveform, function, or pulse generator outputs, it boosts signals up to 300Vp-p with low distortion and high current capacity.

Key Features
- High voltage output: up to 300Vp-p (±150V)
- Output current capability: up to ±150 mA
- Wide bandwidth: DC to >500 kHz
- Slew rate: 200 V/µs for rapid signal transitions
- Low distortion for clean signal amplification
- Fixed gain x15, customizable on request
- Floating or grounded signal configuration
- Compact 2U, half-rack size for bench-top or rack integration
- Compatible with waveform, function, and pulse generators
- Cost-effective, high-fidelity amplification solution
Learn More
Quick View
HIOKI E E CORPORATION 9100A Signal Amplifier
The 9100A Signal Amplifier from Tabor Electronics is a high-voltage, wide-bandwidth amplifier designed for precise signal amplification in demanding applications. Compact yet powerful, it provides up to 400Vp-p output with a full power bandwidth from DC to over 500 kHz, making it ideal for waveform, pulse, or function generator outputs. Its high slew rate, monitor output, and safety features make it a versatile and reliable amplifier for laboratory and industrial use.

Key Features
- High voltage output: up to 400Vp-p (±200V)
- Output current: up to 125 mA
- Full power bandwidth: DC to >500 kHz
- Slew rate: 400 V/µs for fast signal transitions
- Rear-panel monitor output for safe signal tracking
- Compact single-channel design, space-saving 2U form factor
- Compatible with all Tabor waveform generators
- Built-in safety latch and mechanical switch for high-voltage protection
- Low-cost, high-performance solution for high-voltage applications
Learn More
Quick View
Tabor Electronics Ltd. 9160 Single-Channel Amplifier
The Tabor 9160 Single-Channel Amplifier is a high-performance bench-top amplifier engineered for demanding lab and industrial applications. This 2U, half 19” rack-size amplifier provides a wide bandwidth of 45MHz and a high output of 34Vp-p into 50Ω, with peak currents up to 1A. Ideal for piezo-electronics, MEMS, and transducer testing, it combines precision, low distortion, and customizable configurations for gain, input impedance, and output setup.

Key Features
- Single-channel bench-top amplifier, 2U half 19” rack size
- DC-coupled wideband operation with 45MHz bandwidth
- High output voltage: up to 34Vp-p into 50Ω
- Peak output current: 1A, supporting up to 10W output power
- Fast transition time of <10ns for sharp signal edges
- Low distortion for accurate waveform reproduction
- Customizable gain (x10 standard, x15 optional), input impedance, and output configuration
- Front-panel main input with rear-panel auxiliary and DC offset inputs
- Ideal for piezo-electronics, MEMS, transducer characterization, and scientific applications
- Compact design compatible with standard lab setups
Learn More
Quick View
Tabor Electronics Ltd. 9200A Dual Amplifier
The 9200A Dual Amplifier from Tabor Electronics is a high-voltage, dual-channel amplifier engineered for precision signal amplification. With compact design and advanced safety features, it supports versatile applications from laboratory testing to MEMS actuator control. Built to maintain signal fidelity across wide bandwidths, the 9200A offers reliable, low-distortion amplification for critical high-voltage applications.

Key Features
- Dual independent channels with precise amplification
- High voltage output: 400Vp-p (±200V) per channel
- Output current: up to 100 mA per channel
- Full power bandwidth: DC to >500 kHz
- High slew rate: 400 V/µs for fast signal transitions
- Rear-panel monitor outputs for each channel
- Compatible with all Tabor waveform generators
- Special unipolar mode for MEMS engine drivers
- Compact, stackable 2U chassis for bench-top or rack mounting
- Advanced safety latch and front panel high voltage switch
Learn More
Quick View
Tabor Electronics Ltd. 9250 Dual-Channel Amplifier
The Tabor 9250 Dual-Channel Amplifier is a high-performance, bench-top amplifier designed for lab and PXI-based test systems. It provides two independent channels or a single differential output with precise amplification up to 40Vp-p. With large and small signal bandwidths up to 30MHz, a high slew rate of 200V/µs, and low distortion, the 9250 is ideal for waveform amplification and high-fidelity signal testing.

Key Features
- Dual-channel bench-top amplifier, 2U half 19” rack size
- Operates as independent channels or single differential output
- Large signal bandwidth: 15MHz, small signal bandwidth: 30MHz
- High amplitude output: up to 40Vp-p into high impedance
- Slew rate up to 200V/µs for fast signal transitions
- Low distortion for precise waveform reproduction
- Configurable gain, input impedance, output impedance, and output configuration
- Additional rear-panel inputs for DC offset and signal summation
- Stackable design compatible with other Tabor generators and PXI setups
- Front-panel outputs for easy access and measurement
Learn More
Quick View
Tabor Electronics Ltd. 9260 Dual-Channel Amplifier
The Tabor 9260 Dual-Channel Amplifier is a versatile bench-top amplifier designed for high-frequency, high-current signal applications. Its 2U, half 19” rack design delivers up to 34Vp-p output into 50Ω and peak currents up to 1A. The 9260 can operate as two independent channels or one input with two differential outputs, making it perfect for piezo-electronics, MEMS, and transducer testing. Customizable gain, input impedance, and output configurations provide unmatched flexibility for demanding lab environments.

Key Features
- Dual-channel bench-top amplifier, 2U half 19” rack size
- DC-coupled wideband operation with 45MHz bandwidth
- High output voltage: up to 34Vp-p into 50Ω
- Peak output current: 1A, supporting up to 10W output power
- Fast transition time of <10ns for precise signal edges
- Low distortion for accurate waveform reproduction
- Configurable gain (x10 standard, x15 optional), input impedance, and output setup
- Front-panel main input; rear-panel auxiliary and DC offset inputs
- Operates as independent channels or differential output mode
- Ideal for piezo-electronics, MEMS, transducer characterization, and scientific applications
Learn More
Quick View
Tabor Electronics Ltd. 9400 Four Channel Amplifier
The 9400 Four Channel Amplifier from Tabor Electronics is a compact, high voltage signal amplifier built for precision and flexibility. Designed with four fully independent channels, it delivers powerful 400Vp-p output while maintaining exceptional signal integrity across a wide bandwidth. Ideal for laboratory testing, MEMS actuator control, and high voltage research applications, this amplifier combines performance, safety, and space-saving design in one reliable solution.

Key Features
- Four independent amplification channels
- High voltage output up to 400Vp-p (±200V)
- Output current up to 50mA per channel
- Full power bandwidth from DC to over 500kHz
- High slew rate up to 400V per microsecond
- Rear panel monitor outputs divided by 100
- Compatible with Tabor waveform generators
- Special unipolar mode for MEMS engine drivers
- Compact chassis for bench-top stacking or 19 inch rack mounting
- Advanced safety latch and high voltage mechanical switch
Learn More
Quick View
Tabor Electronics Ltd. A10150 Signal Amplifier
The Tabor A10150 Signal Amplifier is a compact, high-speed amplifier designed to enhance any signal source. With 150MHz bandwidth and up to 20Vp-p output into 50Ω, it provides clean, low-distortion amplification. Its ultra-fast transition time of under 1.8ns ensures precise waveform fidelity, making it ideal for Ethernet testing, ASIC, FPGA, and DAC characterization. The A10150 can be used as a standalone amplifier or as a “Snap-On” accessory for Tabor WaveXciter and WS8351/2 models, extending signal voltage without compromising integrity.

Key Features
- Single-channel, DC-coupled wideband amplifier
- High bandwidth of 150MHz for fast signal response
- Maximum output up to 20Vp-p into 50Ω load
- Ultra-fast transition time: <1.8ns for precise waveform edges
- Compact, all-metal footprint for easy integration
- Low distortion ensures clean signal amplification
- Custom gain options: x5 standard, x10 optional
- Compatible with Tabor WaveXciter and WS8351/2 series
- Suitable for Ethernet, FPGA, ASIC, and DAC testing
Learn More
Quick View
Tabor Electronics Ltd. A10160 Signal Amplifier
The Tabor A10160 Signal Amplifier is a compact, high-current amplifier designed to boost any signal source with precision. Offering 45MHz bandwidth, up to 34Vp-p output into 50Ω, and 10W peak power, it ensures clean, low-distortion signals. Its ultra-fast transition time of under 10ns delivers sharp waveform edges, making it ideal for piezo-electronics, transducer testing, MEMS, and general high-speed electronic applications. The A10160 can operate as a standalone amplifier or as a “Snap-On” accessory for Tabor WaveXciter and WS8351/2 series, providing flexible, cost-effective power enhancement.

Key Features
- Single-channel, DC-coupled wideband amplifier
- 45MHz high-speed bandwidth for fast signal response
- Maximum output of 34Vp-p into 50Ω
- High output current drive up to 1A
- Peak power up to 10W, continuous power 7.5W
- Ultra-fast transition time: <10ns
- Compact, all-metal footprint for lab and bench setups
- Low distortion for precise signal amplification
- Custom gain options: x10 standard, x15 or x20 optional
- Compatible with Tabor WaveXciter and WS8351/2 series
Learn More
Quick View
HIOKI E E CORPORATION A10200 RF Signal Amplifier
The A10200 RF Signal Amplifier from Tabor Electronics is a high-power, ultra-wideband amplifier designed for demanding high-frequency applications. Compact and versatile, it extends the output power of any signal source up to +28dBm across 100 kHz to 20 GHz, providing a reliable solution for RF testing, multi-tone experiments, and advanced electronics applications.

Key Features
- Ultra-wideband frequency range: 100 kHz to 20 GHz
- High output power: +28dBm typical at P1dB
- Reverse polarity and over/under voltage protection
- Compact, lightweight design with dedicated power supply
- Ideal for high-frequency RF and signal testing
- Compatible with Tabor Lucid series generators or any signal source
- Maintains signal integrity across full bandwidth
- Cost-effective, versatile solution for laboratory and field applications
Learn More
Quick View
Tabor Electronics Ltd. Model 3180 PXI Amplifier
The Model 3180 PXI Amplifier is a high voltage, wideband signal amplifier designed for PXI systems that demand more power and performance. Delivering up to 180Vp-p output with selectable gain and strong current drive, it solves common voltage limitations found in PXI environments.

Key Features
- Single width PXI card format
- High voltage output up to 180Vp-p ±90V
- Output current up to 150mA
- Large signal bandwidth up to 300kHz
- Small signal bandwidth up to 1MHz
- Slew rate up to 120V per microsecond
- Selectable gain up to x50
- Compatible with Tabor waveform generators
- Integrated safety latch and high voltage switch
- Red visual indicator for high voltage status
Learn More

Tabor Electronics Ltd.

Key Features

Key Features

Key Features

Key Features

Key Features

Key Features

Key Features

Key Features

Key Features

Key Features

Key Features

Key Features

Key Features

Key Features

Key Features

Key Features