Amplifiers

The 9400 Four Channel Amplifier from Tabor Electronics is a compact, high voltage signal amplifier built for precision and flexibility. Designed with four fully independent channels, it delivers powerful 400Vp-p output while maintaining exceptional signal integrity across a wide bandwidth. Ideal for laboratory testing, MEMS actuator control, and high voltage research applications, this amplifier combines performance, safety, and space-saving design in one reliable solution.

Key Features

• Four independent amplification channels
• High voltage output up to 400Vp-p (±200V)
• Output current up to 50mA per channel
• Full power bandwidth from DC to over 500kHz
• High slew rate up to 400V per microsecond
• Rear panel monitor outputs divided by 100
• Compatible with Tabor waveform generators
• Special unipolar mode for MEMS engine drivers
• Compact chassis for bench-top stacking or 19 inch rack mounting
• Advanced safety latch and high voltage mechanical switch

The Tabor A10150 Signal Amplifier is a compact, high-speed amplifier designed to enhance any signal source. With 150MHz bandwidth and up to 20Vp-p output into 50Ω, it provides clean, low-distortion amplification. Its ultra-fast transition time of under 1.8ns ensures precise waveform fidelity, making it ideal for Ethernet testing, ASIC, FPGA, and DAC characterization. The A10150 can be used as a standalone amplifier or as a “Snap-On” accessory for Tabor WaveXciter and WS8351/2 models, extending signal voltage without compromising integrity.

Key Features

• Single-channel, DC-coupled wideband amplifier
• High bandwidth of 150MHz for fast signal response
• Maximum output up to 20Vp-p into 50Ω load
• Ultra-fast transition time: <1.8ns for precise waveform edges
• Compact, all-metal footprint for easy integration
• Low distortion ensures clean signal amplification
• Custom gain options: x5 standard, x10 optional
• Compatible with Tabor WaveXciter and WS8351/2 series
• Suitable for Ethernet, FPGA, ASIC, and DAC testing

The Tabor A10160 Signal Amplifier is a compact, high-current amplifier designed to boost any signal source with precision. Offering 45MHz bandwidth, up to 34Vp-p output into 50Ω, and 10W peak power, it ensures clean, low-distortion signals. Its ultra-fast transition time of under 10ns delivers sharp waveform edges, making it ideal for piezo-electronics, transducer testing, MEMS, and general high-speed electronic applications. The A10160 can operate as a standalone amplifier or as a “Snap-On” accessory for Tabor WaveXciter and WS8351/2 series, providing flexible, cost-effective power enhancement.

Key Features

• Single-channel, DC-coupled wideband amplifier
• 45MHz high-speed bandwidth for fast signal response
• Maximum output of 34Vp-p into 50Ω
• High output current drive up to 1A
• Peak power up to 10W, continuous power 7.5W
• Ultra-fast transition time: <10ns
• Compact, all-metal footprint for lab and bench setups
• Low distortion for precise signal amplification
• Custom gain options: x10 standard, x15 or x20 optional
• Compatible with Tabor WaveXciter and WS8351/2 series

The A10200 RF Signal Amplifier from Tabor Electronics is a high-power, ultra-wideband amplifier designed for demanding high-frequency applications. Compact and versatile, it extends the output power of any signal source up to +28dBm across 100 kHz to 20 GHz, providing a reliable solution for RF testing, multi-tone experiments, and advanced electronics applications.

Key Features

• Ultra-wideband frequency range: 100 kHz to 20 GHz
• High output power: +28dBm typical at P1dB
• Reverse polarity and over/under voltage protection
• Compact, lightweight design with dedicated power supply
• Ideal for high-frequency RF and signal testing
• Compatible with Tabor Lucid series generators or any signal source
• Maintains signal integrity across full bandwidth
• Cost-effective, versatile solution for laboratory and field applications

AE Techron 8700 Series High-Frequency Power Amplifier

Key Features:

• Power output from 4 kW to 24 kW (up to 120 kVA)
• Voltage range up to ±400 Vp / 350 VDC
• Current output up to 360 ARMS continuous
• Wide bandwidth: DC to 250 kHz
• High slew rate: up to 300 V/µs
• Switch-mode efficiency with linear performance
• Scalable for both bench and rack applications
• Drives reactive and resistive loads with no power loss
• THD less than 0.8% with ultra-low noise floor
• Ideal for EMC, MIL-PRF, ISO 61000, and automotive testing

AE Techron 9100 Series High-Current Power Amplifiers

Key Features:

• Power output up to 5 kW continuous (4.2 kW for 9105 model)
• Wide bandwidth: DC to 250 kHz
• Voltage output up to 200 Vp
• Current output from 50A to 150A peak
• Fast 7 µs rise/fall time for surges and dropouts
• Slew rate up to 150 V/µs
• Four-quadrant operation (source and sink)
• Stable with highly capacitive loads
• Works from single-phase AC mains (100–250 VAC)
• Ideal for automotive, aviation, and EMC conducted immunity testing

Aetec 7794 High Current Industrial Amplifier

Key Features:

• Up to 200 Ap / 100 Vp; DC to 150 kHz bandwidth
• Stable with resistive, inductive, or capacitive loads
• Controlled-voltage or controlled-current operation
• Switchable rail supply for optimized load impedance
• 60A continuous output at 13.8V DC
• ±95V DC and >35 V/µs slew rate
• Four-quadrant operation: sourcing and sinking
• Extensive protection against overvoltage, overcurrent, overtemperature
• Rack-mountable chassis with LCD fault diagnostics

AETechron 7796 Amplifier – High-Current, Low-Impedance Industrial Power
Ideal for precision testing, EMC simulations, and MRI systems.

Key Features:

• Delivers over 200 Ap peak current, up to ±180V
• DC to 100 kHz bandwidth for versatile signal reproduction
• Four-quadrant operation (source/sink modes)
• Operates in both voltage and current-controlled modes
• Handles in-rush currents up to 200A
• Field-configurable rail supply modes for load optimization
• Advanced protection against voltage, current, and thermal faults
• Stackable for higher voltage or current (up to 800 Ap)

Broadband RF Amplifiers from Exodus Advanced Communications deliver powerful and reliable signal amplification across a wide frequency spectrum. Designed for demanding RF environments, these solid state power amplifiers provide excellent gain stability, wide bandwidth coverage, and scalable output power. With support for advanced semiconductor technologies and flexible system formats, these broadband RF amplifiers are ideal for defense electronics, RF communications, radar systems, and EMC testing platforms.

Key Features

• Wide frequency coverage from 1 MHz to 18 GHz
• Solid state power amplifier architecture for reliable RF performance
• Output power scalable up to 300 W for modules and 1300 W for systems
• Advanced semiconductor technologies including LDMOS, GaN, and GaAsFET
• Continuous wave and linearized amplifier designs for signal accuracy
• High gain stability for consistent RF signal amplification
• Octave and decade bandwidth capability for flexible RF applications
• Rugged components designed for demanding environments
• Available in benchtop, rackmount, and modular configurations
• Suitable for radar systems, RF immunity testing, and communication platforms

Exodus Low Frequency AMPs – 10 kHz to 4.2 GHz

• High-performance low-frequency amplifiers for RF, defense, and EMC testing
• Coverage: 10 kHz to 4.2 GHz, multiple models available
• Output power scalable from 25 W up to 2 kW per module
• Rugged LDMOS, GaN, and GaAsFET architectures for reliable operation
• CW and linearized solid-state designs for precision signal amplification
• Modular and turnkey system options up to 50 kW
• Optimized for radar, RF immunity, and high-power signal transmission

Low Noise Amplifiers from Exodus Advanced Communications are engineered to deliver exceptional signal clarity and sensitivity across a wide frequency range. Designed for high-performance RF applications, these amplifiers provide ultra low noise figures, high gain, and reliable operation in demanding environments. With coverage from 10 kHz to 50 GHz, Low Noise Amplifiers are ideal for aerospace, defense, telecommunications, and scientific research systems.

Key Features

• Ultra wide frequency coverage from 10 kHz to 50 GHz
• Extremely low noise figure for high sensitivity applications
• High gain performance up to 60 dB
• Output power up to 2 W depending on model
• Advanced RF design for superior signal fidelity
• Available in hermetically sealed and rugged configurations
• Suitable for benchtop, laboratory, and field deployment
• Stable performance across varying environmental conditions
• Designed for satellite communication, radar, and RF testing
• Compact and reliable design for easy integration

Exodus Millimeter AMPs – 18 GHz to 50 GHz

• High-performance millimeter-wave solid-state power amplifiers (SSPAs)
• Frequency range: 18 GHz to 50 GHz for high-frequency RF applications
• Output power scalable from 5 W to 1 kW for modules and systems
• CW and linearized designs for precision signal amplification
• Built with GaN, GaAsFET, chip-and-wire hybrid, and waveguide technologies
• Suitable for radar, EW, RF communications, and EMC testing
• Modular, benchtop, and rackmount formats for flexible deployment

The Model 3180 PXI Amplifier is a high voltage, wideband signal amplifier designed for PXI systems that demand more power and performance. Delivering up to 180Vp-p output with selectable gain and strong current drive, it solves common voltage limitations found in PXI environments.

Key Features

• Single width PXI card format
• High voltage output up to 180Vp-p ±90V
• Output current up to 150mA
• Large signal bandwidth up to 300kHz
• Small signal bandwidth up to 1MHz
• Slew rate up to 120V per microsecond
• Selectable gain up to x50
• Compatible with Tabor waveform generators
• Integrated safety latch and high voltage switch
• Red visual indicator for high voltage status

The Model 3201 RF Amplifier is a high frequency, high power single channel amplifier in a compact PXIe form factor. Operating from 100kHz to 20GHz, it delivers up to 30dBm output power into 50Ω, making it an ideal power extension solution for advanced RF and microwave applications.

Key Features

• Wide bandwidth from 100kHz to 20GHz
• Up to 30dBm saturated output power
• +27dBm typical output power at P1dB
• Single slot PXIe module
• Designed for 50Ω systems
• Reverse polarity protection
• Over voltage and under voltage protection
• Cascade capability for up to 25dB gain
• Compact and cost effective RF solution
• Compatible with Tabor waveform and RF generators

The Model 3202 RF Amplifier is a high frequency, high power dual channel amplifier built in a compact single slot PXIe form factor. Operating from 100kHz to 20GHz and delivering up to 30dBm output power into 50Ω, it provides reliable and stable RF amplification for demanding test environments.

Key Features

• Wide bandwidth from 100kHz to 20GHz
• Dual channel RF amplification
• Up to 30dBm saturated output power
• +27dBm typical output power at P1dB
• Cascade channels for up to 25dB gain
• Single slot PXIe module
• Designed for 50Ω systems
• Reverse polarity protection
• Over voltage and under voltage protection
• Compatible with Tabor waveform and RF generators

The Model 3222 Signal Amplifier is a 3U single slot PXI power amplifier designed for clean and stable signal amplification from DC to over 20MHz. With up to 40Vp p output into high impedance and flexible configuration options, it solves common PXI voltage limitations while maintaining exceptional signal purity.

Key Features

• 3U single width PXI card
• Wideband operation from DC to over 20MHz
• High output amplitude up to 40Vp p into high impedance
• Up to 20Vp p into 50Ω
• Fixed gain x10 standard
• Custom gain configuration available
• Low distortion and high signal purity
• Configurable input and output impedance
• Configurable output polarity
• Floating or grounded signal option up to 250Vdc
• Draws current only from +5V rail