1 800 665 7301 | info@tmetrix.com

POWER QUALITY ANALYZER PW3198

3-Phase 4-Wire Power Quality Analyzer Compliant to IEC61000-4-30 Class A Standards with Dynamic 1300V Range, Harmonic and Inter-harmonics Analysis Capabilities

 

REQUEST A QUOTE



Description

Hioki portable power meters and analyzers are best in class power measuring instruments for measuring single to three-phase lines with a high degree of precision and accuracy. The PW3198 is a power quality analyzer for monitoring and recording power supply anomalies, allowing their causes to be quickly investigated, and also for assessing power supply problems such as voltage drops, flicker, harmonics, and other electrical issues. POWER QUALITY ANALYZER PW3198

PW3198 main unit only
PW3198-90 set model with the PQA-HiView Pro 9624-50

• PW3198 (main unit only) • PW3198-90 (Set model with the PQA-HiView Pro 9624-50) Note: Voltage can be measured with the main unit alone. An optional current sensor is necessary to measure current or power parameters. Use the PQA-HiView Pro 9624-50 (version 2.00 or later) with a PC to analyze the data collected to the SD card.

CELANRS232CUSB2TrueRMS

 

Key Features

• Verify power problems in accordance with the IEC61000-4-30 Class A standard

• High accuracy and continuous gapless recording (V: ±0.1% of nominal voltage, A and W: ±0.2% rdg. ±0.1% f.s.)

• CAT IV 600V – safe enough for incoming power lines

• Broadband voltage range lets you measure even high-order harmonic components of up to 80 kHz

• Wide dynamic range from low voltages up to 1300V (3P4W line-to-line voltage)

• Maximum 6000V transient overvoltage up to 700kHz

• LAN, USB and SD card interfaces

• Optional GPS BOX for synchronizing multiple devices

■ Basic specifications (Accuracy guaranteed for 1 year, Post-adjustment accuracy guaranteed for 1 year)

 

Measurement line type

 

Single-phase 2-wire, Single-phase 3-wire, Three-phase 3-wire or Three-phase 4-wire plus one extra input channel (must be synchronized to reference channel during AC/DC measurement)

 

Voltage ranges

 

Voltage measurement: 600.00 V rms
Transient measurement 6.0000 kV peak

 

Current ranges

 

500.00 mA to 5.0000 kA AC (depends on current sensor in use)

 

Basic accuracy

 

Voltage: ±0.1% of nominal voltage
Current: ±0.2 % rdg. ±0.1 % f.s. + current sensor accuracy
Active power: ±0.2 % rdg. ±0.1 % f.s. + current sensor accuracy

 

Measurement items

 

1. Transient over voltage : 2 MHz sampling
2. Frequency cycle : Calculated as one cycle, 40 to 70 Hz
3. Voltage (1/2) RMS: one cycle calculation refreshed every half cycle
Current (1/2) RMS: half-cycle calculation
4. Voltage swell, Voltage dips, Voltage interruption
5. Inrush current
6. Voltage waveform comparison
7. Instantaneous flicker value: As per IEC61000-4-15
8. Frequency: Calculated as 10 or 12 cycles,40 to 70 Hz
9. 10-sec frequency: Calculated as the whole-cycle time during the specified 10 s period, 40 to 70 Hz
10. Voltage waveform peak, Current waveform peak
11. Voltage, Current, Active power, Apparent power, Reactive power, Active energy, Reactive energy, Power factor, Displacement power factor, Voltage unbalance factor, Current unbalance factor (negative-phase, zero-phase)
12. High-order harmonic component (voltage/ current): 2 kHz to 80 kHz
13. Harmonic/ Harmonic phase angle (voltage/ current), Harmonic power: 0th to 50 th orders
14. Harmonic voltage-current phase angle: 1th to 50 th orders
15. Total harmonic distortion factor (voltage/ current)
16. Inter harmonic (voltage/ current): 0.5 Hz to 49.5 Hz
17. K Factor (multiplication factor)
18. IEC Flicker, Δ V10 Flicker

 

Record

 

55 weeks (with repeated recording set to [1 Week], 55 iterations)
35 days (with repeated recording set to [OFF])

 

Interfaces

 

SD/SDHC card, RS-232C, LAN (HTTP server funtion), and USB2.0

 

Display

 

6.5-inch TFT color LCD (640 × 480 dots)

 

Power supply

 

AC Adapter Z1002 (12 V DC, Rated power supply 100 V AC to 240 V AC, 50/60 Hz)
Battery Pack Z1003 (Ni-MH 7.2 V DC 4500 mAh)

 

Dimensions and mass

 

300 mm (11.81 in) W × 211 mm (8.31 in) H × 68 mm (2.68 in) D (excluding protrusions), 2.6 kg (91.7 oz) (including battery pack)

 

Accessories

 

Instruction manual × 1, Measurement guide × 1, Voltage Cord L1000 × 1 set (Red/Yellow/Blue/Gray, each 1, Black × 4, Alligator clip × 8), Spiral tube × 20, Input Cable Labels × 1, AC Adapter Z1002 × 1, Strap × 1, USB cable (1 m 3.28 ft length) × 1, Battery Pack Z1003 × 1, SD memory card 2GB Z4001 × 1

Reviews

There are no reviews yet!

Be the first to write a review

*

Contact ACA TMetrix Inc.

Address

3585 Laird Road, Unit 15 & 16, Mississauga ON L5L 5Z8

Phone: 1-800-665-7301

Fax: 1-905-890-1959

Email: info@tmetrix.com

About ACA TMetrix Inc.

ACA TMetrix Inc. is a leading supplier of test instruments and design tools in Canada. For over 50 years we have provided services and support for products that are manufactured by the world's leading instrument suppliers.

TMetrix Ltd. is Part of the ACA Group of Companies. Allan Crawford Associates (ACA), is one of Canada's largest distributors of electronic components, test equipment, and scientific solutions.

Our Location

Top