Description
HIOKI Clamp On Power Meters are multi-channel power measuring devices utilizing clamp sensor input to accurately and safely measure power on single-phase to three-phase lines. The PW3365-20 takes safety and convenience one step further by being the world’s first non-metallic contact power meter that utilizes completely covered voltage clips that can be attached to any part of a cable or busbar. Customers can now monitor power demand and other power parameters to aid in energy audits and validate energy saving measures without risk of short-circuit accidents, power interruptions, or bodily injury due to electrocutions. CLAMP ON POWER LOGGER PW3365
PW3365-20 |
Power Logger (w/4 PW9020 Non Contact Voltage Sensors) |
||
PW3365-20-01/100 |
Power Logger Kit (Custom 100A Kit) |
||
PW3365-20-01/500 |
Power Logger Kit (Custom 500A Kit) |
||
PW3365-20-01/1000 |
Power Demand Analyzer (Custom 1000A Kit) |
||
PW3365-20-01/5000 |
Power Demand Analyzer (Custom 5000A Kit) |
Note: Clamp On Power Logger PW3365 by itself does not support current and power measurements. Current and power measurements require clamp on sensors, sold separately. Use only HIOKI SD cards guaranteed to work for saving measurement data (options, sold separately).
Key Features
• The PW3365’s dedicated voltage sensor delivers the world’s first no-metal-contact measurement.
• Supports single to three-phase, 4-wire circuits
• Measure between 90V to 520V
• Slim, compact design that can be placed anywhere
• Store months of data on SD cards
• The QUICK SET function guides you in making the right connections
Basic specifications (Accuracy guaranteed for 1 year, Post-adjustment accuracy guaranteed for 6 months)
|
Measurement line & number of circuits |
50/60 Hz, Single phase 2 wires (1/2/3 circuits), Single phase 3 wires (1 circuit), Three phases 3 wires (1 circuit), Three phases 4 wires (1 circuit), Current only: 1 to 3 channels |
|---|---|
|
Measurement items |
Voltage RMS, current RMS, voltage fundamental wave value, current fundamental wave value, voltage fundamental wave phase angle, current fundamental wave phase angle, frequency (U1), voltage waveform peak (absolute value), current waveform peak (absolute value), active power, reactive power, apparent power, power factor (with lag/lead display) or displacement power factor (with lag/lead display), active energy (consumption, regeneration), reactive energy (lag, lead), energy cost display, active power demand quantity (consumption, regeneration), reactive power demand quantity (lag, lead), active power demand value (consumption, regeneration), reactive power demand value (lag, lead), power factor demand |
|
Voltage ranges |
400 V AC (Effective measurement range: 90.0 V to 520.0 V) |
|
Current ranges |
5
00.00 mA to 5.0000 kA AC (depends on current sensor in use), |
|
Power ranges |
200.00 W to 6.0000 MW (Depends on voltage/current combination and measured line type) |
|
Basic accuracy |
Voltage : ±1.5% rdg. ±0.2% f.s(combined accuracy with PW3365-20 + PW9020) |
|
Display update rate |
0.5 sec (except when accessing SD card or internal memory, or during LAN/USB communication) |
|
Save destination |
SD Memory card, or internal memory at real time |
|
Data save interval |
1 sec to 30 sec, 1 minute to 60 minutes, 14 selections |
|
Save items |
Measurement value save: Average only / Average, Maximum, Minimum value |
|
Interfaces |
SD memory card |
|
Functions |
Connection check, Quick Set navigation guide, clock |
|
Power supply |
AC adapter Z1008: (100 to 240 V AC, 50/60 Hz), 45 VA (including AC adapter) |
|
Dimensions and mass |
180 mm (7.09 in)W × 100 mm (3.94 in)H × 48 mm (1.89 in)D, 540 g (19 oz) without PW9002 |
|
Accessories |
Safety Voltage Sensor PW9020 ×1 set, AC adapter Z1008 ×1, USB cable ×1, Instruction manual ×1, Measurement guide ×1, Color spiral tubes ×1 set: red, yellow, blue/four each, Spiral tubes for grouping clamp sensor cords ×10 |
