HIOKI E E CORPORATION

The Hioki Memory Recorder is a high-speed, fully-isolated data acquisition system designed for precise and simultaneous measurement of multiple analog and logic signals. Ideal for testing, simulation, and system diagnostics, it combines waveform generation and recording in one powerful unit.

Key Features:

• Generate and record waveforms using a single device
• Simulate issues by outputting previously recorded problematic waveforms to test devices
• Supports 32 analog + 32 logic channels, expandable to 28 analog + 64 logic channels
• High-speed sampling up to 20 MS/s with fully isolated inputs
• Ensures safe measurement with complete analog input isolation
• Equipped with a large-capacity 512M-word memory
• Simultaneously measures high voltage and ultra-low voltage system signals

The Memory HiCorder MR8848 is a rugged, high-speed data acquisition recorder designed for capturing critical transient events in demanding industrial and infrastructure environments.

Key Features

• Durable, shock-resistant portable design for field use
• Isolated analog channels for safe multi-system measurements
• 32 analog and 64 logic channels for complex signal analysis
• High-speed sampling to capture fast transient waveforms
• Large-capacity memory for long-duration recording
• Built-in waveform and numerical analysis for pass or fail judgments
• Optional on-site printer for secure, tamper-proof documentation

The Memory HiCorder MR8870 is a compact, high-speed data acquisition recorder designed for waveform observation and RMS variation recording in maintenance and fault analysis applications.

Key Features

• Dual recording mode for instantaneous waveforms and RMS variations
• Two isolated analog channels with 2 MW internal memory
• Real-time saving of measured values to CF card
• Synchronize two instruments to record four channels at once
• High-speed performance up to 1 MS per second
• Compact handheld design for easy field transport
• Sharp QVGA TFT wide LCD for clear waveform viewing
• Ideal for elevator, motor, inverter, and machine diagnostics

The Memory HiCorder MR8875 is a high-speed, portable data acquisition recorder designed for vehicle testing, performance evaluation, and advanced multichannel measurements.

Key Features

• 1000 V direct input with instantaneous DC and RMS measurement
• Up to 16 to 60 channels with plug-and-play input modules
• High-speed simultaneous logging down to 2 microseconds
• Real-time recording directly to SD card for long-term logging
• 16-bit high-resolution measurement for accurate results
• Direct CAN bus input for onboard vehicle analysis
• Built-in FFT and waveform calculation for advanced analysis
• Intuitive touch screen interface for fast setup and operation
• Designed to withstand vibration and extreme temperatures

The Memory HiCorder MR8880 is a rugged, field-ready waveform recorder designed to capture high- and low-voltage signals safely in industrial and maintenance applications.

Key Features

• Direct 600 V input for three-phase power measurements
• CAT III 600 V isolation for safe high-voltage testing
• Four completely isolated analog channels
• Simultaneous recording of three-phase systems plus one spare channel
• Wide operating temperature range from minus 10 to 50 degrees Celsius
• Shock- and vibration-resistant housing with side protectors
• Built-in trigger and pre-trigger functions for precise event capture
• Presets function for fast and consistent setup

The Memory HiLogger LR8431 is a compact, high-speed 10-channel data logger designed for accurate measurement of voltage, temperature, pulse, and rotation signals. With fully isolated analog channels, 10 ms simultaneous sampling, and flexible USB and CF card storage, it delivers reliable performance for R&D, production lines, and field testing applications.

Key Features

• 10 isolated analog input channels for safe, interference-free measurement
• 10 ms simultaneous sampling across all channels
• Records directly to USB flash drive or Compact Flash card
• Storage media can be replaced during active recording
• Improved thermocouple accuracy with enhanced reference junction compensation
• Noise-resistant circuitry for stable measurements
• Bright widescreen color LCD for clear waveform display
• Ultra-compact and lightweight for easy portability

The Memory HiLogger LR8450 is a portable, high-speed data logger engineered for precise measurement of voltage, temperature, strain, and resistance in automotive, e-mobility, and industrial applications. With modular plug-in units, it expands to 120 channels and offers sampling speeds as fast as 1 ms, making it ideal for high-frequency and high-voltage environments.

Key Features

• Expandable to 120 channels with modular plug-ins
• Ultra-fast 1 ms sampling for precise voltage and strain measurements
• Direct strain gauge connection for real-time stress and load analysis
• Stable logging in high-voltage and high-frequency environments
• Supports analog, temperature, and strain measurement simultaneously
• Compatible with GENNECT Cloud for remote monitoring and data management

The Memory HiLogger LR8450-01 is a high-speed, wireless-enabled data logger for multi-channel voltage, temperature, strain, and resistance measurements. With a 1 ms sampling speed and expandable capacity up to 330 channels, it is ideal for automotive, EV, and industrial applications where remote or hard-to-wire locations require precise data collection.

Key Features

• Wireless LAN model expandable to 330 channels with plug-in and wireless modules
• 1 ms sampling speed for voltage, pressure, and strain sensors
• Direct strain gauge connection for real-time stress measurement
• Minimizes noise effects for high-voltage and high-frequency applications
• Enables remote monitoring via PC or tablet using wireless LAN
• Reduces wiring complexity for dispersed or confined measurement locations

The Pulse Generator MR8791 is a plug-and-play input module for Hioki Memory HiCorders, designed for precise control simulation testing of electronic control systems.

Key Features

• Outputs pulse and pattern waveforms on up to eight channels
• Supports TTL level and open-collector output signals
• Designed for control simulation testing of ECUs and control boards
• Suitable for engine, airbag, brake, and power steering systems
• Wide frequency range for pulse and logic pattern generation
• Built-in self-test function for reliable operation
• Isolated design between unit and output channels
• Compact form factor for laboratory and test bench integration

The Hioki PW3360 Clamp On Power Logger is a compact and portable power measurement solution designed for accurate energy audits and power demand monitoring. Built for single-phase to three-phase, four-wire systems, it enables safe and efficient measurement using clamp sensors without interrupting operations.

Key Features

• Supports single-phase to three-phase, four-wire circuits
• Measures voltage from 90 V to 780 V
• Simultaneously measures up to three single-phase, two-wire circuits
• Compact and lightweight design for confined installations
• Long-term data storage using SD cards
• Quick Set function guides correct wiring and setup
• Graphical trend and demand display for quick analysis
• Optional harmonic measurement up to the 40th order

The Hioki PW3365 Clamp On Power Logger is a next-generation power measurement solution designed to eliminate short-circuit risks and electrical accidents. Using a non-metallic voltage sensor, it allows safe voltage measurement by clamping directly onto insulated cables or busbars without exposing live conductors.

Key Features

• Non-metallic voltage measurement eliminates short-circuit risk
• Supports single-phase to three-phase, 4-wire systems
• Voltage measurement range from 90 V to 520 V
• Harmonic analysis up to the 13th order
• Compact, lightweight design for flexible installation
• Stores long-term measurement data on SD cards
• Quick Setup function prevents wiring mistakes
• Ideal for energy audits and power quality assessments

The VIR Generator U8794 is a high-precision signal generation unit designed to simulate sensor outputs for ECU inspection, component testing, and maintenance applications.

Key Features

• Generates DC voltage, DC current, and resistance simulation signals
• Ideal for ECU inspection, electronic component testing, and equipment maintenance
• Eight fully isolated output channels for safe multi-signal simulation
• High-accuracy resistance simulation with automatic current calculation
• Designed exclusively for use with Memory HiCorder MR8740 series
• Supports sensor simulation testing without physical sensors
• Compact and lightweight design for bench and field environments

The Waveform Generator U8793 is a plug-and-play module for Hioki Memory HiCorders that enables arbitrary waveform output and anomaly simulation for advanced testing scenarios.

Key Features

• Outputs arbitrary waveform signals on up to two channels
• Reproduces waveforms recorded with a Memory HiCorder up to 15 V
• Generates customized arbitrary waveforms up to 15 V output
• Built-in function generator and sweep function
• Isolated design between unit and outputs and between channels
• Supports anomaly simulation and scenario-based testing
• Includes Waveform Maker software for easy waveform creation
• Designed for use with compatible Hioki Memory HiCorder models

Max. 108 Analog Channels, Reduce Inspection Data Transfer Time to Zero

Key Features of HiCORDER MR8740T – High-Speed Data Acquisition:

• Ideal for multipoint inspection of high performance boards such as ECU
• 108ch analog to 96ch analog + 48ch logic input
• Reduce time required to save to external media to max.1/100 compared with conventional method
• 20 MS/s simultaneous sampling on all channels
• Safe measurement with all analog inputs isolated
• Supports 4K monitor to display multi-channel waveforms without overlapping
• Measure 4 channels with 1 unit (4 ch analog Unit U8975, 4 ch DVM Unit U8991)
• Generate constant voltage, constant current, and simulated resistance (VIR Generator Unit U8794)

High-speed 20 MS/s (*1), 32-channel, Fully Isolated Memory Recorder for On-site Jobs and R&D

Key Features:

• Supports a wide variety of measurements with a total of 17 plug-in modules
• Generate and record with a single unit
• Direct 1000 V high voltage input testing
• High-speed sampling up to 20MS/s (*1) with fully isolated inputs
• 32 analog channels + 16 logic ch to 20 analog channels + 64 logic ch
• High-speed sampling with waveform judgement function
• Soil-resistant construction strong against adverse working environments
• Big buttons coated to withstand industrial oil and residue
• Drop-in paper loading and one-touch setup, along with high-speed 50mm/s printing

• High speed sampling of 5 MS/s ensures catching high speed phenomena
  
• Isolated 4 channel input
  
• Max. rated voltage to ground: 300 V AC or DC (CAT II)
  
• High resolution measurement with 16 bit A/D
  
• For Memory HiCorder MR6000 and MR8740T