Description
HIOKI Clamp On Power Meters are multi-channel power measuring devices utilizing clamp sensor input to accurately and safely measure power on single-phase to three-phase lines. The PW3360 monitor power demand and other power parameters to aid in energy audits and validate energy saving measures. Hioki Clamp
PW3360-20
PW3360-20-01/100
PW3360-20-01/500
PW3360-20-01/1000
PW3360-20-01/5000
Note: At least one optional current sensor is necessary to measure current or power parameters. To store measurement data, use only the guaranteed SD cards sold by HIOKI.
Key Features
• Supports single to three-phase, 4-wire circuits
• Measure between 90V to 780V
• Simultaneously measure up to three single-phase, 2-wire circuits (in the same power system)
• Slim, compact design that can be placed anywhere
• Store months of data on SD cards
• The QUICK SET function guides you in making the right connections
• Choose PW3360-21 for harmonic measurements up to the 40th order
Basic specifications (Accuracy guaranteed for 1 year, Post-adjustment accuracy guaranteed for 1 year) Hioki Clamp
|
Measurement line & number of circuits |
50/60 Hz, Single phase 2 wires (1/2/3 circuits), Single phase 3 wires (1 circuit), Three phases 3 wires (1 circuit), Three phases 4 wires (1 circuit), Current only: 1 to 3 channels |
|---|---|
| Measurement
items |
Voltage RMS, current RMS, voltage fundamental wave value, current fundamental wave value, voltage fundamental wave phase angle, current fundamental wave phase angle, frequency (U1), voltage waveform peak (absolute value), current waveform peak (absolute value), active power, reactive power (with lag/lead display), apparent power, power factor (with lag/lead display) or displacement power factor (with lag/lead display), active energy (consumption, regeneration), reactive energy (lag, lead), energy cost display, active power demand quantity (consumption, regeneration), reactive power demand quantity (lag, lead), active power demand value (consumption, regeneration), reactive power demand value (lag, lead), power factor demand, pulse input |
|
Voltage ranges |
600 V AC (Effective measurement range: 90.00 V to 780.00 V) |
|
Current ranges |
500.00 mA to 5.0000 kA AC (depends on current sensor in use), |
|
Power ranges |
300.00 W to 9.0000 MW (Depends on voltage/current combination and measured line type) |
|
Basic accuracy |
Voltage : ±0.3% rdg. ±0.1% f.s |
|
Display update rate |
0.5 sec (except when accessing SD card or internal memory, or during LAN/USB communication) |
|
Save destination |
SD memory card, or internal memory at real time |
|
Data save interval |
1 sec to 30 sec, 1 minute to 60 minutes, 14 selections |
| Save items |
Measurement value save: Average only / Average, Maximum, Minimum value |
|
Interfaces |
SD memory card |
|
Functions |
Connection check, Quick Set navigation guide, clock, pulse input |
|
Power supply |
AC Adapter Z1006: (100 to 240 V AC, 50/60 Hz), 40 VA (including AC adapter) |
|
Dimensions and mass
|
180 mm (7.09 in) W × 100 mm (3.94 in) H × 48 mm (1.89 in) D, 550 g (19.4 oz) without PW9002 |
|
Accessories |
Voltage Cord L9438-53 × 1 set, AC Adapter Z1006 × 1, USB cable × 1, Instruction manual × 1, Measurement guide × 1, Color spiral tubes × 1 set: red, yellow, blue/two each, for color-coding clamp sensors, Spiral tubes for grouping clamp sensor cords × 5 |
