1 800 665 7301 | info@tmetrix.com

POWER ANALYZER 3390 -10

DC, 0.5 Hz to 150 kHz, 3-phase 4-wire, High Precision Power Analyzer for Motor and Inverter Efficiency Analysis

 

REQUEST A QUOTE



Description

Hioki benchtop power meters and power analyzers are best in class power measuring instruments for measuring single to three-phase lines with a high degree of precision and accuracy. The 3390-10 is our most precise power analyzer, featuring a broad range for measuring electrical power from DC to inverter frequencies, providing four input channels to support single- and three-phase inverter motor system measurements. POWER ANALYZER 3390

Order Code

3390-10 super precise version

Note: Data sheets for specific combinations of Model 3390-10 and current sensors available upon request. Note: Optional current sensor and voltage cord are necessary to measure current or power parameters.
CERS232CUSB2LANTrueRMS

 

Key Features

• Super precise ±0.1% accuracy model to meet the demanding needs of today

• Switch from one range to another and still maintain the same ±0.1% accuracy on all ranges

• Guaranteed accuracy period is extended another 6 months from the basic Model 3390 (other functions remain the same)

• Advanced motor analysis functions (measures the electric angle and supports vector control)

• High-speed harmonic analysis function (50 ms data refresh rate)

• Noise analysis function for inverters (using FFT analysis technology)

• Inverter power measurement with the convenience of clamp on sensors

■ Basic specifications (Accuracy guaranteed for 1 year, Post-adjustment accuracy guaranteed for 6 months)

 

Measurement line type

 

Single-phase 2-wire, single-phase 3-wire, three-phase 3-wire, three-phase 4-wire, Voltage 4 channels, Current 4 channels, Isolated between each channel

 

Measurement items

 

Voltage, Current, Voltage/current waveform peak, Active power, Reactive power, Apparent power, Power factor, Phase angle, Frequency, Current integration, Power integration, Efficiency, Loss, Voltage/current ripple factor
Noise measurement (FFT processing): RMS spectrum of voltage/current
Harmonic measurement: RMS value, Content factor, Phase angle, Total distortion, Disequilibrium factor
Additional functions (With optional 9791 or 9793 installed in the main unit) : Torque, Rotation, Frequency, Slip, or Motor output

 

Harmonic measurement

 

Input: 4 ch, Synchronization frequency range: 0.5 Hz to 5 kHz,
Number of harmonic orders: Max. 100th order

 

Noise measurement

 

Number of channels: 1 ch (select one channel from CH1 to CH4),
Maximum analysis frequency: 100 k/ 50 k/ 20 k/ 10 k/ 5 k/ 2 kHz

 

Measurement range

 

Voltage range: 15 to 1500 V, 7 ranges
Current range: 400 mA to 500 A (depends on current sensor, 20A/ 50A/ 200A/ or 500A rated)
Power range: 6.0000 W to 2.2500 MW (depends on combination of voltage and current range)
Frequency range: 0.5 Hz to 5 kHz

 

Basic accuracy (45Hz to 66Hz)

 

Voltage: ±0.05 % rdg. ±0.05 % f.s.
Current: ±0.05 % rdg. ±0.05 % f.s. (Defined at combined accuracy with dedicated sensors)
Active power: ±0.05 % rdg. ±0.05 % f.s. (Defined at combined accuracy with dedicated sensors)
Note: Accuracy for the high accuracy Models 3390-10 and Current Sensors are not defined individually. Please use these products in combination to obtain ±0.1% accuracy.

 

Synchronization frequency range

 

0.5 Hz to 5 kHz

 

Frequency band

 

DC, 0.5 Hz to 150 kHz

 

Data update rate

 

50 ms (For harmonic measurement, depends on the synchronization frequency when less than 45 Hz)

 

Display refresh rate

 

200 ms (Independent of internal data update rate; waveform and FFT depend on the screen)

 

Data save interval

 

OFF, 50 msec to 500 msec, 1 sec to 30 sec, 1 minute to 60 minutes, 15 settings

 

External interfaces

 

LAN, USB (communication/ memory), RS-232C, CF card, Synchronization control

 

Power supply

 

100 to 240 V AC, 50/60 Hz, 140 VA max.

 

Dimensions and mass

 

340 mm (13.39 in) W × 170 mm (6.69 in) H × 157 mm (6.18 in) D, 4.8 kg (169.3 oz)

 

Accessories

 

Instruction Manual for Model 3390-10 × 1, Instruction Manual for Model 3390 × 1, Power cord × 1, Measurement Guide × 1, USB cable × 1, Measurement cable label sheet × 2, D-sub connector × 1 (when 9792 or 9793 is installed)

■ Specifications for the Motor Testing Option (Accuracy guaranteed for 6 months, Post-adjustment accuracy guaranteed for 6 months)

 

Number of input channels

 

3 channels, CH A: Torque signal input (DC V / Frequency input), CH B: Rotation signal input (DC V / Pulse input), CH Z: Z-phase signal input (Pulse input)

 

Measurement item

 

Voltage, Torque, Rotation, Frequency, Slip, Motor power

 

DC V (CH A/B)

 

Measurement range: ±1 V/ ±5 V/ ±10 V, Accuracy: ±0.1 % rdg. ±0.1 % f.s.

 

Frequency (CH A)

 

Effective amplitude range: ±5 V peak, Measurement band: 1 kHz to 100 kHz

 

Pulse (CH B)

 

Detection level: (Low) 0.5 V or less, (High) 2.0 V or more, Measurement band: 1 Hz to 200 kHz

 

Pulse (CH Z)

 

Detection level: (Low) 0.5 V or less, (High) 2.0 V or more, Measurement band: 0.1 Hz to 1 kHz

Reviews

There are no reviews yet!

Be the first to write a review

*

Contact ACA TMetrix Inc.

Address

3585 Laird Road, Unit 15 & 16, Mississauga ON L5L 5Z8

Phone: 1-800-665-7301

Fax: 1-905-890-1959

Email: info@tmetrix.com

About ACA TMetrix Inc.

ACA TMetrix Inc. is a leading supplier of test instruments and design tools in Canada. For over 50 years we have provided services and support for products that are manufactured by the world's leading instrument suppliers.

TMetrix Ltd. is Part of the ACA Group of Companies. Allan Crawford Associates (ACA), is one of Canada's largest distributors of electronic components, test equipment, and scientific solutions.

Our Location

Top