Products

The Hioki 3506-10 C Meter is a high-speed dual-band capacitance meter designed specifically for ceramic capacitor testing on automated production lines. Built for seamless integration with taping machines and sorting systems, it delivers fast, stable, and repeatable measurements even in demanding manufacturing environments.

Key Features

• Dual measurement frequencies of 1 kHz and 1 MHz
• Ultra-fast analog test time of 0.6 ms at 1 MHz
• Stable low-capacitance measurement for MLCC production
• Enhanced noise resistance for reliable inline testing
• BIN function for efficient component screening
• Designed for integration with taping machines and sorters
• Excellent repeatability for high-volume manufacturing

The Digital Multimeter DT4281 is Hioki’s flagship high precision multimeter, engineered for advanced electrical and power system testing. Featuring a 60000 count display, true RMS measurement, and industry leading safety design, it delivers fast, accurate results even in complex and high energy environments.

Key Features

• High resolution 60000 count digital multimeter
• Excellent DC voltage accuracy of ±0.025 percent
• Wide AC voltage frequency range from 20 Hz to 100 kHz
• True RMS measurement for accurate readings on distorted waveforms
• Low pass filter for inverter and harmonic rich signals
• Clamp sensor based current measurement for enhanced safety
• Terminal shutter mechanism to prevent incorrect lead insertion
• Dual display for simultaneous voltage and frequency monitoring
• CAT IV 600 V and CAT III 1000 V safety rated
• Designed and manufactured in Japan with 3 year warranty

The DM7275 Precision DC Voltmeter is a high stability 7 and a half digit DC voltmeter designed to bridge the gap between research environments and high volume production lines. With a guaranteed one year accuracy of 20 ppm, it delivers reliable and repeatable measurements for lithium ion batteries, advanced capacitors, and next generation electronic components.

Key Features

• 7 and a half digit DC voltage measurement
• 1 year guaranteed 20 ppm accuracy
• Ideal for R and D and production line testing
• Capacitance contact check using built in C monitor
• Fully automatic self calibration for long term stability
• Resistant to temperature fluctuations
• Simultaneous voltage and temperature measurement
• Temperature compensated voltage display
• Built in EXT I O, LAN, and USB interfaces
• Optional GP IB or RS 232C communication models
• Built in variable power supply for global production use

The DM7275 Precision DC Voltmeter provides 7½-digit resolution and 20 ppm accuracy, making it perfect for R&D, production lines, and high-precision battery testing. Its advanced contact check, temperature compensation, and multiple connectivity options ensure reliable measurement for lithium-ion batteries, EV components, and next-generation devices.

Key Features

• High-accuracy 7½-digit DC voltmeter with 20 ppm (0.002%) guaranteed accuracy
• Built-in capacitance contact check for maximum measurement reliability
• Temperature compensation converts voltage to standard temperature values
• Fully automatic self-calibration for long-term stability
• Built-in EXT I/O, LAN, USB, GP-IB (DM7275-02), and RS-232C (DM7275-03)
• Supports R&D and production line environments worldwide
• Simultaneous measurement of temperature and voltage
• Ideal for Li-ion batteries, EV components, and electrical double-layer capacitors

The DM7276 Precision DC Voltmeter is a 7 and a half digit high accuracy instrument designed for ultra precise DC voltage measurement. With industry leading 9 ppm accuracy, it is ideal for lithium ion battery aging tests, capacitor evaluation, and next generation energy device development.

Key Features

• 7 and a half digit precision with 9 ppm accuracy
• Designed for lithium ion battery aging and evaluation
• Built in capacitance contact check for reliable measurements
• Fully automatic self calibration for long term stability
• Resistant to temperature fluctuations and environmental changes
• Simultaneous voltage and temperature measurement
• Temperature compensated voltage display
• Supports global production with variable power supply
• Built in EXT I O, LAN, and USB interfaces
• Optional GP IB or RS 232C communication models

The DMM Station MR8990 combined with the MR8740 or MR8741 Memory HiCorder delivers high precision, simultaneous DC voltage measurement across up to 32 channels. Designed for capturing minute voltage fluctuations, this system is ideal for advanced sensor analysis, battery testing, and automotive electronics evaluation.

Key Features

• High precision DC voltage measurement using DVM Unit MR8990
• Simultaneous sampling across multiple channels
• Supports up to 32 channels with expandable configuration
• Measures minute voltage fluctuations with high resolution
• Accuracy of ±0.01 percent with 1.2 million count resolution
• High speed sampling up to 500 samples per second
• Isolated inputs for enhanced safety and signal integrity
• Suitable for battery, sensor, and automotive testing
• Rack mountable system for laboratory and production use
• Compatible only with MR8740 and MR8741 Memory HiCorders

The Hioki 3153 HiTESTER is an all-in-one solution for insulation resistance and AC/DC voltage withstand testing. It is fully programmable for automated multi-point testing, making it ideal for industrial, manufacturing, and electrical safety applications.

Key Features

• Programmable insulation testing from 50 V to 1200 V DC
• Dielectric strength testing for AC/DC voltages up to 5 kV
• Store and program up to 32 test files with 50 steps each
• Optional scanner for automatic multi-point testing
• Accurate voltage generation via PWM method, independent of supply voltage
• Ramp timer function for controlled voltage rise/fall during testing
• Digital display of measured voltage, current, and resistance
• Compact design with full remote operation capability

The Hioki 3930 High Voltage Scanner is a passive auxiliary device designed to streamline multi-point high-voltage testing when paired with the Hioki 3153 or a sequencer. Its isolated channels allow safe and efficient AC/DC voltage testing while minimizing connection changes, making it ideal for industrial testing and quality control applications.

Key Features

• Supports AC/DC high-voltage output up to 5 kV
• Multi-point testing: 8 channels per unit, up to 32 channels with 4 connected units
• Fully isolated HV I/O, control lines, and power supply
• Operates in multi-mode or single-mode scanning for flexible testing
• Compatible with Hioki 3153 program function or standard sequencer
• Fast operation with <6 ms response and recovery time
• Includes HV test leads, control connector cable, and grounding cable

The Hioki BT5525 Tester is engineered for battery production lines to detect microscopic insulation defects and contamination before shipment. It ensures safety, reduces false negatives, and accelerates high-speed testing, making it ideal for modern battery manufacturing.

Key Features

• Proprietary BDD function detects minuscule internal short-circuits caused by contamination
• Stable insulation resistance testing even in noisy environments
• Contact check function prevents erroneous judgments
• Maximum test voltage of 500 V for battery cell, module, and pack testing
• High-speed charging up to 50 mA and discharging up to 40 mA for faster testing
• Compact design allows integration into battery production systems
• Cost-effective solution for small to large battery cells and packs
• PC application for waveform review and CSV data export

The Hioki M7103 Module is a compact, high-precision power measurement solution designed for multi-channel efficiency testing of PV inverters, high-voltage batteries, and energy storage systems. Ideal for embedded and production line applications, it offers unmatched scalability, speed, and accuracy.

Key Features

• Power analyzer-class accuracy: DC/AC ±0.07%
• Supports up to 1500 V DC measurement
• 12 channels per 4U rack unit; expandable to 120 channels
• Synchronization Source Sharing for stable efficiency measurements
• High-speed data transfer with 5 ms sampling interval
• Suitable for PV inverter and multi-MPPT string efficiency testing
• Direct measurement without differential probes for high voltages
• Compliant with EN IEC 61010 safety standards

The Hioki PW3335 Meter is a high-precision single-phase power meter designed to measure AC/DC standby power and large power loads with exceptional accuracy. Ideal for energy testing of transformers, adapters, power supplies, and motors, it supports currents up to 30 A continuous and handles high crest factors for accurate low-power measurements.

Key Features

• Measures AC/DC power from 1 mA to 20 A (max 30 A continuous)
• High-precision basic accuracy: ±0.1%
• Wide frequency bandwidth: DC to 100 kHz
• Measures harmonic and standby power per IEC62301
• Accurate even at low power factors for no-load testing
• Supports crest factor up to CF6 for high-accuracy AC adapter testing
• Multi-unit synchronization: up to 8 meters
• Optional external sensor inputs up to 5000 A (PW3335-03/-04)
• Built-in LAN, RS-232C, GP-IB, and D/A outputs depending on model

The Hioki PW3336 Meter is a high-precision, 2-channel power meter for DC, single-phase, and three-phase measurements. It delivers accurate readings for motors, inverters, power conditioners, and industrial power supplies, supporting voltages up to 1000 V and currents up to 65 A direct input.

Key Features

• Measures DC, single-phase 2-wire, single-phase 3-wire, and 3-phase 3-wire systems
• High-precision basic accuracy: ±0.1%
• Frequency bandwidth: DC to 100 kHz
• Supports currents up to 65 A direct input, up to 5000 A with optional sensors
• Harmonic analysis up to the 50th order (IEC 61000-4-7)
• Multi-unit synchronization: up to 8 units
• Built-in GP-IB or D/A output options available
• Ideal for motor, inverter, power conditioner, and industrial equipment testing

The Hioki PW3337 Meter is a high-precision, 3-channel power meter for DC, single-phase, and three-phase 4-wire systems. It is ideal for motors, inverters, power conditioners, and industrial power supplies, supporting voltages up to 1000 V and currents up to 65 A direct input.

Key Features

• Measures DC, single-phase 2-wire to 3-phase 4-wire systems
• High-precision basic accuracy: ±0.1%
• Frequency bandwidth: DC to 100 kHz
• Supports currents up to 65 A direct input, up to 5000 A with optional sensors
• Harmonic analysis up to the 50th order (IEC 61000-4-7)
• Multi-unit synchronization: up to 8 units
• Can create a 6-channel setup by synchronizing two units via PC application
• Built-in GP-IB or D/A output options available
• Ideal for development and production of motors, inverters, and power conditioners

Key Features:

• Fastest insulation tester in the industry with results in as little as 50 ms
• Wide test voltage range: 25 V to 1000 V with 1 V resolution
• Quick residual voltage discharge for faster takt times
• Contact check function prevents false readings from poor connections
• Short-circuit check detects micro-shorts before testing
• Built-in LAN and RS-232C for system integration
• Compact, lightweight design ideal for battery and production line testing
• Models available: ST5520 (I/O output) and ST5520-01 (BCD output)

The Hioki VT1005 Divider allows safe, accurate measurement of high voltages up to 5000 V and evaluation of inverter efficiency with exceptional precision. Its broad frequency range, high noise immunity, and differential input design make it ideal for power system and high-voltage inverter applications.

Key Features

• Maximum input voltage: 5000 V AC/DC
• Differential input method for precise measurement
• ±0.08% DC accuracy, ±0.04% at 50/60 Hz, ±0.17% at 50 kHz
• Frequency band: DC to 4 MHz (-3 dB)
• Excellent amplitude flatness: ±0.1% up to 200 kHz
• Phase flatness: ±0.1° up to 500 kHz
• Noise resistance: CMRR 80 dB typical (100 kHz)
• Detects efficiency improvements on the order of 0.1%
• Safely measures high voltages that standard analyzers cannot handle

The Hioki IM3523A LCR Meter is a high-speed, reliable measurement instrument designed for production lines, providing precision and efficiency at a competitive price point. Its contact check function ensures improved measurement reliability for consistent results.

Key Features

• Measurement accuracy: ±0.05% across DC to 200 kHz
• Rapid 2 millisecond test speed
• Wide measurement range: 5 mV to 5 V, 10 μA to 50 mA
• Continuous testing under mixed conditions (C-D 120 Hz, ESR 100 kHz)
• Built-in comparator and BIN classification functions
• Contact check for enhanced measurement reliability
• Multiple measurement parameters: Z, Y, θ, X, G, B, Q, Rdc, Rs, Rp, Ls, Lp, Cs, Cp, D (tanδ)
• Interfaces: USB, LAN, EXT I/O for automation