Products

The Hioki IM3523A LCR Meter is a high-speed, reliable measurement instrument designed for production lines, providing precision and efficiency at a competitive price point. Its contact check function ensures improved measurement reliability for consistent results.

Key Features

• Measurement accuracy: ±0.05% across DC to 200 kHz
• Rapid 2 millisecond test speed
• Wide measurement range: 5 mV to 5 V, 10 μA to 50 mA
• Continuous testing under mixed conditions (C-D 120 Hz, ESR 100 kHz)
• Built-in comparator and BIN classification functions
• Contact check for enhanced measurement reliability
• Multiple measurement parameters: Z, Y, θ, X, G, B, Q, Rdc, Rs, Rp, Ls, Lp, Cs, Cp, D (tanδ)
• Interfaces: USB, LAN, EXT I/O for automation

The Hioki IM3533 LCR Meter is a precision measurement instrument designed for R&D environments and transformer, winding, and coil manufacturing. It combines high accuracy, advanced inductance analysis, and built-in DC bias to support modern compliance and production testing.

Key Features

• Measurement range from DC and 1 mHz to 200 kHz
• High accuracy of ±0.05 percent across a wide signal range
• Built-in DC bias for HDMI compliance and real-world testing
• Dedicated modes for turn ratio, mutual inductance, and inductance difference
• Continuous testing across mixed conditions such as C-D and ESR
• High precision low impedance mode for low inductance and ESR testing
• Touch screen interface with intuitive operation
• Advanced frequency sweep testing available on IM3533-01
• Cable length compensation settings for improved accuracy

The Hioki IM3536 LCR Meter is a versatile, high-precision instrument designed for both R&D and production applications. With a broad frequency range and high-speed measurements, it ensures accurate evaluation of capacitors, inductors, and coils under real-world conditions.

Key Features

• Measurement frequency: DC, 4 Hz to 8 MHz (customizable up to 10 MHz)
• High-speed measurement: 1 millisecond per test
• High-precision accuracy: ±0.05% reading
• Low-impedance measurement from 1 mΩ with excellent repeatability
• DC bias function for simulating real-use conditions
• Ideal for evaluating capacitors, inductors, and power supply components
• Interfaces: USB, GP-IB, RS-232C for automated data collection
• Cost-effective solution for both R&D and production lines

The Hioki IM7580A is a compact, high-speed impedance analyzer for 1 MHz to 300 MHz testing, ideal for both production and R&D. It works seamlessly with the IM9201 SMD fixture for reliable component testing.

Key Features:

• 1 MHz to 300 MHz frequency range
• 0.5 ms test speed
• ±0.72% basic accuracy
• Compact half-rack size with palm-sized test head
• Reliable contact check functions
• Frequency, level, and time sweeps in Analyzer Mode
• RF I-V method for precise measurement

The Hioki IM7581 is a compact, high-speed impedance analyzer designed for accurate testing from 100 kHz to 300 MHz. It’s ideal for both production and development environments.

Key Features:

• 100 kHz to 300 MHz frequency range
• 0.5 ms fastest test speed
• ±0.72% basic accuracy
• Compact half-rack size, palm-sized test head
• Reliable contact check via DCR, Hi-Z reject, or waveform judgment
• Supports frequency, level, and time sweeps in Analyzer Mode
• Uses RF I-V method for precise measurement

The Hioki Impedance Analyzer IM7587 3 GHz provides precision, speed, and versatility for impedance measurements from 1 MHz to 3 GHz, ideal for both R&D and mass production applications in electronic component testing.

Key Features:

• Frequency range: 1 MHz to 3 GHz
• Test speed: 0.5 ms
• Measurement variability: 0.07%
• Basic accuracy: ±0.65% reading
• RF I-V measurement technique
• Compact half-rack design with palm-sized test head
• Robust contact check capabilities
• Analyzer mode: frequency and level sweeps, time interval measurements

The Memory HiCorder MR8848 is a rugged, high-speed data acquisition recorder designed for capturing critical transient events in demanding industrial and infrastructure environments.

Key Features

• Durable, shock-resistant portable design for field use
• Isolated analog channels for safe multi-system measurements
• 32 analog and 64 logic channels for complex signal analysis
• High-speed sampling to capture fast transient waveforms
• Large-capacity memory for long-duration recording
• Built-in waveform and numerical analysis for pass or fail judgments
• Optional on-site printer for secure, tamper-proof documentation

The Memory HiCorder MR8870 is a compact, high-speed data acquisition recorder designed for waveform observation and RMS variation recording in maintenance and fault analysis applications.

Key Features

• Dual recording mode for instantaneous waveforms and RMS variations
• Two isolated analog channels with 2 MW internal memory
• Real-time saving of measured values to CF card
• Synchronize two instruments to record four channels at once
• High-speed performance up to 1 MS per second
• Compact handheld design for easy field transport
• Sharp QVGA TFT wide LCD for clear waveform viewing
• Ideal for elevator, motor, inverter, and machine diagnostics

The Memory HiCorder MR8875 is a high-speed, portable data acquisition recorder designed for vehicle testing, performance evaluation, and advanced multichannel measurements.

Key Features

• 1000 V direct input with instantaneous DC and RMS measurement
• Up to 16 to 60 channels with plug-and-play input modules
• High-speed simultaneous logging down to 2 microseconds
• Real-time recording directly to SD card for long-term logging
• 16-bit high-resolution measurement for accurate results
• Direct CAN bus input for onboard vehicle analysis
• Built-in FFT and waveform calculation for advanced analysis
• Intuitive touch screen interface for fast setup and operation
• Designed to withstand vibration and extreme temperatures

The Memory HiCorder MR8880 is a rugged, field-ready waveform recorder designed to capture high- and low-voltage signals safely in industrial and maintenance applications.

Key Features

• Direct 600 V input for three-phase power measurements
• CAT III 600 V isolation for safe high-voltage testing
• Four completely isolated analog channels
• Simultaneous recording of three-phase systems plus one spare channel
• Wide operating temperature range from minus 10 to 50 degrees Celsius
• Shock- and vibration-resistant housing with side protectors
• Built-in trigger and pre-trigger functions for precise event capture
• Presets function for fast and consistent setup

The Pulse Generator MR8791 is a plug-and-play input module for Hioki Memory HiCorders, designed for precise control simulation testing of electronic control systems.

Key Features

• Outputs pulse and pattern waveforms on up to eight channels
• Supports TTL level and open-collector output signals
• Designed for control simulation testing of ECUs and control boards
• Suitable for engine, airbag, brake, and power steering systems
• Wide frequency range for pulse and logic pattern generation
• Built-in self-test function for reliable operation
• Isolated design between unit and output channels
• Compact form factor for laboratory and test bench integration

The VIR Generator U8794 is a high-precision signal generation unit designed to simulate sensor outputs for ECU inspection, component testing, and maintenance applications.

Key Features

• Generates DC voltage, DC current, and resistance simulation signals
• Ideal for ECU inspection, electronic component testing, and equipment maintenance
• Eight fully isolated output channels for safe multi-signal simulation
• High-accuracy resistance simulation with automatic current calculation
• Designed exclusively for use with Memory HiCorder MR8740 series
• Supports sensor simulation testing without physical sensors
• Compact and lightweight design for bench and field environments

The Waveform Generator U8793 is a plug-and-play module for Hioki Memory HiCorders that enables arbitrary waveform output and anomaly simulation for advanced testing scenarios.

Key Features

• Outputs arbitrary waveform signals on up to two channels
• Reproduces waveforms recorded with a Memory HiCorder up to 15 V
• Generates customized arbitrary waveforms up to 15 V output
• Built-in function generator and sweep function
• Isolated design between unit and outputs and between channels
• Supports anomaly simulation and scenario-based testing
• Includes Waveform Maker software for easy waveform creation
• Designed for use with compatible Hioki Memory HiCorder models

Applications:

• Aerospace & Defense – Avionics, MIL-STD-704, EMC compliance, 400Hz & wild frequency testing
• EV Charging & V2G/V2H Testing – On-board chargers, grid-tied inverters, smart grid simulation
• Energy Storage & Renewable Systems – Home ESS, solar PV/grid-tied inverter testing
• Industrial Power Simulation – Frequency conversion, harmonic analysis, transient simulations
• Smart Grid & Compliance Testing – IEC 61000, RTCA DO-160, IEEE 1547, and more

Applications

• Aerospace & Avionics – Frequency conversion (400Hz & wild frequency testing), MIL-STD compliance
• EV Charging & Power Electronics – On-board chargers (OBC), V2G/V2H testing, battery simulation
• Renewable Energy Systems – Solar PV/grid-tied inverter testing, home ESS & smart grid simulations
• Power Supply & Industrial Testing – AC/DC power supply evaluation, network server & data center testing
• Research & Development Labs – High-frequency power testing, compliance verification, transient simulations

High-Power 4-Quadrant AC & DC Power Source with Load Option

• Powerful & Versatile: 12kVA / kW to 21kVA / kW in a 4U chassis. Parallel units up to 168kVA/kW (single cabinet)or 252kVA/kW (dual cabinet).
• Multi-Phase Flexibility: Supports single-phase, split-phase, and three-phase configurations with AC, DC, or AC+DC output.
• Grid Simulation & Compliance Testing: Emulates real-world power grid conditions, simulating disturbances, harmonics, and interharmonics for accurate renewable energy testing (solar inverters, EV charging, microgrid, and UPS applications).
• Regenerative Efficiency: Over 90% energy recovery back to the grid reduces power consumption and operational costs.
• Advanced Control & Monitoring: SmartSource Suite enables remote control via an intuitive web browser interface with LAN, USB, GPIB, and RS232 connectivity.