PRODUCTS
TMetrix carries the following test and measurement products:
SERVICES
Explore our range of technical support and calibration services:
1 800 665 7301 | [email protected]

About Us | Events | Support | Resource Centre | Line Card | News | Blog | Careers | Contact Us

Products

Showing 1–16 of 26 results

  • CHEMICAL IMPEDANCE ANALYZER IM3590
    CHEMICAL IMPEDANCE ANALYZER IM3590 - 2
    Quick View
    HIOKI E E CORPORATION CHEMICAL IMPEDANCE ANALYZER IM3590 USD $ 10,866.40

    A high-performance analyzer designed for R&D applications involving electrochemical components, materials, batteries, and EDLCs. It enables precise impedance measurements essential for advanced evaluation and development.

    Key Features:

    • Wide frequency range: 1 mHz to 200 kHz for detailed ion and solution behavior analysis
    • Dual function: High-speed continuous LCR and sweep measurements with one device
    • Battery analysis: Measures internal impedance under no-load conditions
    • Ultra-fast sweep: Perform measurements in as little as 2 ms
    • High accuracy: ±0.05% basic precision for reliable R&D and testing
    • Advanced analysis: Supports Cole-Cole plots and equivalent-circuit modeling for electrochemical studies
    Add to cart
    Learn More
  • Digital Power Meters
    Digital Power Meters
    Quick View
    Teledyne LeCroy Digital Power Meters USD $ 1,736.44

    Teledyne Test Tools Digital Power Meters provide reliable, high-precision AC and DC power measurements in a compact design. Ideal for R&D, QA, and compliance testing.

    Key Features:

    • Bandwidth: DC, 0.1 Hz to 100 kHz
    • High-resolution 4″ and 5″ TFT LCD displays
    • 19 power measurement parameters
    • 16-bit ADC and 300 kHz sampling rate (T3PM1100)
    • Waveform, harmonic, and integration functions
    • External current sensor input (T3PM1100)
    • Supports IEC 62301 and IEC 61000-4-7 standards
    • Interfaces: USB, LAN, RS-232C
    • Front/rear terminal inputs for flexible testing

     

    Select options This product has multiple variants. The options may be chosen on the product page
    Learn More
  • EQUIVALENT CIRCUIT ANALYSIS FIRMWARE IM9000
    EQUIVALENT CIRCUIT ANALYSIS FIRMWARE IM9000
    Quick View
    HIOKI E E CORPORATION EQUIVALENT CIRCUIT ANALYSIS FIRMWARE IM9000 USD $ 1,831.09

    An advanced firmware upgrade for the IM3570 that enables quick and accurate equivalent circuit analysis, ideal for in-depth component evaluation and quality control.

    Key Features:

    • Automatically selects the optimal equivalent circuit model from five typical options
    • Minimizes discrepancies between measured and ideal frequency characteristics
    • Determines acceptance/rejection of L, C, and R elements with precision
    • Evaluates resonance sharpness (mechanical quality coefficient)
    • Enables detailed analysis of piezoelectric elements and inductors through resonance
    Add to cart
    Learn More
  • Hioki FT6031-50 Earth Tester - 1
    Hioki FT6031-50 Earth Tester - 2
    Quick View
    HIOKI E E CORPORATION Hioki FT6031-50 Earth Tester USD $ 551.87

    The Hioki Earth Tester FT6031-50 is a robust, IP67-rated ground resistance tester designed for fast, precise, and reliable measurements in challenging field environments. Ideal for professional electrical maintenance and safety inspections, it ensures accurate earth resistance testing for all grounding types.

    Key Features:

    • IP67 dustproof and waterproof protection for outdoor use
    • Wireless data transfer with optional Z3210 Adapter
    • Test Class A to D grounds with a single meter
    • Wide measurement range from 0 Ω to 2000 Ω
    • Advanced noise resistance up to 25 V rms
    • Auto power-off and digital display for efficient operation
    • Easy two-pole or three-pole measurement methods
    • Innovative tangle-free cable winder for quick setup and cleanup

     

    Select options This product has multiple variants. The options may be chosen on the product page
    Learn More
  • Hioki FT6041 Earth Tester - 1
    Hioki FT6041 Earth Tester - 2
    Quick View
    HIOKI E E CORPORATION Hioki FT6041 Earth Tester USD $ 2,002.91

    The Hioki Earth Tester FT6041 is a highly versatile and durable ground resistance tester engineered for precision and performance in any field environment. With IP67 protection, multiple measurement methods, and wireless data transfer capability, it’s ideal for professionals handling complex grounding applications.

    Key Features:

    • Compatible with 2, 3, and 4-pole measurement methods
    • MEC function for testing without disconnecting ground electrodes
    • IP67-rated protection for harsh field environments
    • Measures even on concrete using Earth Nets Module
    • Fast 6-second readings with tangle-free cord rewinding
    • Operates in extreme temperatures from -25°C to 65°C
    • Optional Z3210 adapter enables wireless data transfer
    • Excellent noise resistance with 30 V RMS ground potential tolerance

     

    Select options This product has multiple variants. The options may be chosen on the product page
    Learn More
  • Hioki M7103 Module - 01
    Hioki M7103 Module - 03
    Quick View
    HIOKI E E CORPORATION Hioki M7103 Module

    The Hioki M7103 Module is a compact, high-precision power measurement solution designed for multi-channel efficiency testing of PV inverters, high-voltage batteries, and energy storage systems. Ideal for embedded and production line applications, it offers unmatched scalability, speed, and accuracy.

    Key Features

    • Power analyzer-class accuracy: DC/AC ±0.07%
    • Supports up to 1500 V DC measurement
    • 12 channels per 4U rack unit; expandable to 120 channels
    • Synchronization Source Sharing for stable efficiency measurements
    • High-speed data transfer with 5 ms sampling interval
    • Suitable for PV inverter and multi-MPPT string efficiency testing
    • Direct measurement without differential probes for high voltages
    • Compliant with EN IEC 61010 safety standards

     

    Learn More
  • Hioki PW3335 Meter - 01
    Hioki PW3335 Meter - 03
    Quick View
    HIOKI E E CORPORATION Hioki PW3335 Meter

    The Hioki PW3335 Meter is a high-precision single-phase power meter designed to measure AC/DC standby power and large power loads with exceptional accuracy. Ideal for energy testing of transformers, adapters, power supplies, and motors, it supports currents up to 30 A continuous and handles high crest factors for accurate low-power measurements.

    Key Features

    • Measures AC/DC power from 1 mA to 20 A (max 30 A continuous)
    • High-precision basic accuracy: ±0.1%
    • Wide frequency bandwidth: DC to 100 kHz
    • Measures harmonic and standby power per IEC62301
    • Accurate even at low power factors for no-load testing
    • Supports crest factor up to CF6 for high-accuracy AC adapter testing
    • Multi-unit synchronization: up to 8 meters
    • Optional external sensor inputs up to 5000 A (PW3335-03/-04)
    • Built-in LAN, RS-232C, GP-IB, and D/A outputs depending on model

     

    Learn More
  • Hioki PW3336 Meter - 01
    Quick View
    HIOKI E E CORPORATION Hioki PW3336 Meter

    The Hioki PW3336 Meter is a high-precision, 2-channel power meter for DC, single-phase, and three-phase measurements. It delivers accurate readings for motors, inverters, power conditioners, and industrial power supplies, supporting voltages up to 1000 V and currents up to 65 A direct input.

    Key Features

    • Measures DC, single-phase 2-wire, single-phase 3-wire, and 3-phase 3-wire systems
    • High-precision basic accuracy: ±0.1%
    • Frequency bandwidth: DC to 100 kHz
    • Supports currents up to 65 A direct input, up to 5000 A with optional sensors
    • Harmonic analysis up to the 50th order (IEC 61000-4-7)
    • Multi-unit synchronization: up to 8 units
    • Built-in GP-IB or D/A output options available
    • Ideal for motor, inverter, power conditioner, and industrial equipment testing

     

    Learn More
  • Hioki PW3337 Meter - 01
    Hioki PW3337 Meter - 03
    Quick View
    HIOKI E E CORPORATION Hioki PW3337 Meter

    The Hioki PW3337 Meter is a high-precision, 3-channel power meter for DC, single-phase, and three-phase 4-wire systems. It is ideal for motors, inverters, power conditioners, and industrial power supplies, supporting voltages up to 1000 V and currents up to 65 A direct input.

    Key Features

    • Measures DC, single-phase 2-wire to 3-phase 4-wire systems
    • High-precision basic accuracy: ±0.1%
    • Frequency bandwidth: DC to 100 kHz
    • Supports currents up to 65 A direct input, up to 5000 A with optional sensors
    • Harmonic analysis up to the 50th order (IEC 61000-4-7)
    • Multi-unit synchronization: up to 8 units
    • Can create a 6-channel setup by synchronizing two units via PC application
    • Built-in GP-IB or D/A output options available
    • Ideal for development and production of motors, inverters, and power conditioners

     

    Learn More
  • Hioki VT1005 Divider - 01
    Hioki VT1005 Divider - 04
    Quick View
    HIOKI E E CORPORATION Hioki VT1005 Divider

    The Hioki VT1005 Divider allows safe, accurate measurement of high voltages up to 5000 V and evaluation of inverter efficiency with exceptional precision. Its broad frequency range, high noise immunity, and differential input design make it ideal for power system and high-voltage inverter applications.

    Key Features

    • Maximum input voltage: 5000 V AC/DC
    • Differential input method for precise measurement
    • ±0.08% DC accuracy, ±0.04% at 50/60 Hz, ±0.17% at 50 kHz
    • Frequency band: DC to 4 MHz (-3 dB)
    • Excellent amplitude flatness: ±0.1% up to 200 kHz
    • Phase flatness: ±0.1° up to 500 kHz
    • Noise resistance: CMRR 80 dB typical (100 kHz)
    • Detects efficiency improvements on the order of 0.1%
    • Safely measures high voltages that standard analyzers cannot handle

     

    Learn More
  • IM3523A LCR Meter - 01
    IM3523A LCR Meter - 03
    Quick View
    HIOKI E E CORPORATION IM3523A LCR Meter

    The Hioki IM3523A LCR Meter is a high-speed, reliable measurement instrument designed for production lines, providing precision and efficiency at a competitive price point. Its contact check function ensures improved measurement reliability for consistent results.

    Key Features

    • Measurement accuracy: ±0.05% across DC to 200 kHz
    • Rapid 2 millisecond test speed
    • Wide measurement range: 5 mV to 5 V, 10 μA to 50 mA
    • Continuous testing under mixed conditions (C-D 120 Hz, ESR 100 kHz)
    • Built-in comparator and BIN classification functions
    • Contact check for enhanced measurement reliability
    • Multiple measurement parameters: Z, Y, θ, X, G, B, Q, Rdc, Rs, Rp, Ls, Lp, Cs, Cp, D (tanδ)
    • Interfaces: USB, LAN, EXT I/O for automation

     

    Learn More
  • IM3533 LCR Meter - 01
    IM3533 LCR Meter - 02
    Quick View
    HIOKI E E CORPORATION IM3533 LCR Meter

    The Hioki IM3533 LCR Meter is a precision measurement instrument designed for R&D environments and transformer, winding, and coil manufacturing. It combines high accuracy, advanced inductance analysis, and built-in DC bias to support modern compliance and production testing.

    Key Features

    • Measurement range from DC and 1 mHz to 200 kHz
    • High accuracy of ±0.05 percent across a wide signal range
    • Built-in DC bias for HDMI compliance and real-world testing
    • Dedicated modes for turn ratio, mutual inductance, and inductance difference
    • Continuous testing across mixed conditions such as C-D and ESR
    • High precision low impedance mode for low inductance and ESR testing
    • Touch screen interface with intuitive operation
    • Advanced frequency sweep testing available on IM3533-01
    • Cable length compensation settings for improved accuracy

     

    Learn More
  • IM3536 LCR Meter - 01
    IM3536 LCR Meter - 03
    Quick View
    HIOKI E E CORPORATION IM3536 LCR Meter

    The Hioki IM3536 LCR Meter is a versatile, high-precision instrument designed for both R&D and production applications. With a broad frequency range and high-speed measurements, it ensures accurate evaluation of capacitors, inductors, and coils under real-world conditions.

    Key Features

    • Measurement frequency: DC, 4 Hz to 8 MHz (customizable up to 10 MHz)
    • High-speed measurement: 1 millisecond per test
    • High-precision accuracy: ±0.05% reading
    • Low-impedance measurement from 1 mΩ with excellent repeatability
    • DC bias function for simulating real-use conditions
    • Ideal for evaluating capacitors, inductors, and power supply components
    • Interfaces: USB, GP-IB, RS-232C for automated data collection
    • Cost-effective solution for both R&D and production lines

     

    Learn More
  • IMPEDANCE ANALYZER IM7580A
    IMPEDANCE ANALYZER IM7580A - 2
    Quick View
    HIOKI E E CORPORATION IMPEDANCE ANALYZER IM7580A USD $ 14,517.66

    The Hioki IM7580A is a compact, high-speed impedance analyzer for 1 MHz to 300 MHz testing, ideal for both production and R&D. It works seamlessly with the IM9201 SMD fixture for reliable component testing.

    Key Features:

    • 1 MHz to 300 MHz frequency range
    • 0.5 ms test speed
    • ±0.72% basic accuracy
    • Compact half-rack size with palm-sized test head
    • Reliable contact check functions
    • Frequency, level, and time sweeps in Analyzer Mode
    • RF I-V method for precise measurement
    Learn More
  • IMPEDANCE ANALYZER IM7581
    IMPEDANCE ANALYZER IM7581 - 2
    Quick View
    HIOKI E E CORPORATION IMPEDANCE ANALYZER IM7581 USD $ 17,671.64

    The Hioki IM7581 is a compact, high-speed impedance analyzer designed for accurate testing from 100 kHz to 300 MHz. It’s ideal for both production and development environments.

    Key Features:

    • 100 kHz to 300 MHz frequency range
    • 0.5 ms fastest test speed
    • ±0.72% basic accuracy
    • Compact half-rack size, palm-sized test head
    • Reliable contact check via DCR, Hi-Z reject, or waveform judgment
    • Supports frequency, level, and time sweeps in Analyzer Mode
    • Uses RF I-V method for precise measurement
    Learn More
  • Impedance Analyzer IM7587 3 GHz
    Impedance Analyzer IM7587 3 GHz
    Quick View
    HIOKI E E CORPORATION IMPEDANCE ANALYZER IM7587 3 GHz USD $ 29,638.88

    The Hioki Impedance Analyzer IM7587 3 GHz provides precision, speed, and versatility for impedance measurements from 1 MHz to 3 GHz, ideal for both R&D and mass production applications in electronic component testing.

    Key Features:

    • Frequency range: 1 MHz to 3 GHz
    • Test speed: 0.5 ms
    • Measurement variability: 0.07%
    • Basic accuracy: ±0.65% reading
    • RF I-V measurement technique
    • Compact half-rack design with palm-sized test head
    • Robust contact check capabilities
    • Analyzer mode: frequency and level sweeps, time interval measurements
    Learn More

Showing 1–16 of 26 results