HIOKI E E CORPORATION

Showing 33–48 of 88 results


  • The Hioki IM3536 LCR Meter is a versatile, high-precision instrument designed for both R&D and production applications. With a broad frequency range and high-speed measurements, it ensures accurate evaluation of capacitors, inductors, and coils under real-world conditions.

    Key Features

    • Measurement frequency: DC, 4 Hz to 8 MHz (customizable up to 10 MHz)
    • High-speed measurement: 1 millisecond per test
    • High-precision accuracy: ±0.05% reading
    • Low-impedance measurement from 1 mΩ with excellent repeatability
    • DC bias function for simulating real-use conditions
    • Ideal for evaluating capacitors, inductors, and power supply components
    • Interfaces: USB, GP-IB, RS-232C for automated data collection
    • Cost-effective solution for both R&D and production lines

     

  • The Hioki IM7580A is a compact, high-speed impedance analyzer for 1 MHz to 300 MHz testing, ideal for both production and R&D. It works seamlessly with the IM9201 SMD fixture for reliable component testing.

    Key Features:

    • 1 MHz to 300 MHz frequency range
    • 0.5 ms test speed
    • ±0.72% basic accuracy
    • Compact half-rack size with palm-sized test head
    • Reliable contact check functions
    • Frequency, level, and time sweeps in Analyzer Mode
    • RF I-V method for precise measurement
  • The Hioki IM7581 is a compact, high-speed impedance analyzer designed for accurate testing from 100 kHz to 300 MHz. It’s ideal for both production and development environments.

    Key Features:

    • 100 kHz to 300 MHz frequency range
    • 0.5 ms fastest test speed
    • ±0.72% basic accuracy
    • Compact half-rack size, palm-sized test head
    • Reliable contact check via DCR, Hi-Z reject, or waveform judgment
    • Supports frequency, level, and time sweeps in Analyzer Mode
    • Uses RF I-V method for precise measurement
  • The Hioki Impedance Analyzer IM7587 3 GHz provides precision, speed, and versatility for impedance measurements from 1 MHz to 3 GHz, ideal for both R&D and mass production applications in electronic component testing.

    Key Features:

    • Frequency range: 1 MHz to 3 GHz
    • Test speed: 0.5 ms
    • Measurement variability: 0.07%
    • Basic accuracy: ±0.65% reading
    • RF I-V measurement technique
    • Compact half-rack design with palm-sized test head
    • Robust contact check capabilities
    • Analyzer mode: frequency and level sweeps, time interval measurements
  • The Hioki MR6000 Memory HiCorder sets a new benchmark in waveform recording, combining cutting-edge technology, intuitive design, and world-class performance. Built from the ground up, it’s engineered to tackle both current and future measurement challenges with ease and precision.

    Key Features:

    • Large, intuitive touch panel for efficient and user-friendly operation
    • Simultaneous multi-channel isolation measurement at up to 200 MS/s (with High Speed Analog Unit U8976)
    • Significantly faster data saving for a seamless experience
    • Real-time data saving without interrupting ongoing measurements
  • The Hioki Rack-mounted Multi-channel System Recorder (MR8741/MR8740) is a powerful, high-speed, single-device solution for waveform recording and generation. Ideal for test systems, it offers high-resolution, isolated multi-channel measurements with fast sampling capabilities.

    Key Features:

    • Integrated waveform recording and generation in one device
    • Equipped with DVM Unit MR8990 for high-accuracy 24-bit resolution measurements
    • Supports up to 16 channels (MR8741) for multi-channel testing
    • Isolated input between channels and from input to chassis (up to 300 V AC/DC)
    • High-speed sampling up to 20 MS/s
    • Compact rack-mountable design (4U height, under 180 mm depth)
    • Monitor display and setting access via DVI-D and mouse
    • Enables remote measurement and control via LAN
    • Browser-based screen monitoring or advanced control via Hioki 9333 LAN Communicator
  • The Hioki Memory Recorder is a high-speed, fully-isolated data acquisition system designed for precise and simultaneous measurement of multiple analog and logic signals. Ideal for testing, simulation, and system diagnostics, it combines waveform generation and recording in one powerful unit.

    Key Features:

    • Generate and record waveforms using a single device
    • Simulate issues by outputting previously recorded problematic waveforms to test devices
    • Supports 32 analog + 32 logic channels, expandable to 28 analog + 64 logic channels
    • High-speed sampling up to 20 MS/s with fully isolated inputs
    • Ensures safe measurement with complete analog input isolation
    • Equipped with a large-capacity 512M-word memory
    • Simultaneously measures high voltage and ultra-low voltage system signals

     

  • The Memory HiCorder MR8848 is a rugged, high-speed data acquisition recorder designed for capturing critical transient events in demanding industrial and infrastructure environments.

    Key Features

    • Durable, shock-resistant portable design for field use
    • Isolated analog channels for safe multi-system measurements
    • 32 analog and 64 logic channels for complex signal analysis
    • High-speed sampling to capture fast transient waveforms
    • Large-capacity memory for long-duration recording
    • Built-in waveform and numerical analysis for pass or fail judgments
    • Optional on-site printer for secure, tamper-proof documentation

     

  • The Memory HiCorder MR8870 is a compact, high-speed data acquisition recorder designed for waveform observation and RMS variation recording in maintenance and fault analysis applications.

    Key Features

    • Dual recording mode for instantaneous waveforms and RMS variations
    • Two isolated analog channels with 2 MW internal memory
    • Real-time saving of measured values to CF card
    • Synchronize two instruments to record four channels at once
    • High-speed performance up to 1 MS per second
    • Compact handheld design for easy field transport
    • Sharp QVGA TFT wide LCD for clear waveform viewing
    • Ideal for elevator, motor, inverter, and machine diagnostics

     

  • The Memory HiCorder MR8875 is a high-speed, portable data acquisition recorder designed for vehicle testing, performance evaluation, and advanced multichannel measurements.

    Key Features

    • 1000 V direct input with instantaneous DC and RMS measurement
    • Up to 16 to 60 channels with plug-and-play input modules
    • High-speed simultaneous logging down to 2 microseconds
    • Real-time recording directly to SD card for long-term logging
    • 16-bit high-resolution measurement for accurate results
    • Direct CAN bus input for onboard vehicle analysis
    • Built-in FFT and waveform calculation for advanced analysis
    • Intuitive touch screen interface for fast setup and operation
    • Designed to withstand vibration and extreme temperatures

     

  • The Memory HiCorder MR8880 is a rugged, field-ready waveform recorder designed to capture high- and low-voltage signals safely in industrial and maintenance applications.

    Key Features

    • Direct 600 V input for three-phase power measurements
    • CAT III 600 V isolation for safe high-voltage testing
    • Four completely isolated analog channels
    • Simultaneous recording of three-phase systems plus one spare channel
    • Wide operating temperature range from minus 10 to 50 degrees Celsius
    • Shock- and vibration-resistant housing with side protectors
    • Built-in trigger and pre-trigger functions for precise event capture
    • Presets function for fast and consistent setup

     

  • The Pulse Generator MR8791 is a plug-and-play input module for Hioki Memory HiCorders, designed for precise control simulation testing of electronic control systems.

    Key Features

    • Outputs pulse and pattern waveforms on up to eight channels
    • Supports TTL level and open-collector output signals
    • Designed for control simulation testing of ECUs and control boards
    • Suitable for engine, airbag, brake, and power steering systems
    • Wide frequency range for pulse and logic pattern generation
    • Built-in self-test function for reliable operation
    • Isolated design between unit and output channels
    • Compact form factor for laboratory and test bench integration

     

  • The RM3542C Resistance Meter is designed for high-precision, in-line testing of chip resistors and ferrite beads. It delivers fast, reliable, and safe measurement for modern production lines.

    Key Features

    • ΔR function for cross-stage process comparison (RM3542C-3)
    • BIN grading for instant sorting into up to 7 categories (RM3542C-3)
    • Jumper resistance support accelerates low-resistance measurements
    • Low-stress testing ≤5 V prevents damage to delicate components
    • Continuous contact monitoring ensures reliable results
    • Galvanically isolated architecture for noise immunity on production lines
    • Optimized integration time for high-speed, repeatable measurements

     

  • The RM3543 Resistance HiTESTER is a precision DC resistance meter designed to measure ultra-low and low shunt resistances with outstanding accuracy. Ideal for automated systems, this tester ensures repeatable results and reliable data for current sensing resistors, shunts, and other low-resistance components.

    Key Features

    • Measures super-low resistances: 0.1 mΩ with ±0.16% accuracy
    • Ultra-high resolution: 0.01 μΩ for precise inspection
    • Offset voltage correction minimizes thermoelectromotive effects
    • Scaling function adjusts readings for mounted components
    • Contact improvement function ensures stable and reliable measurements
    • Advanced contact-check, comparator, and data export capabilities
    • Intuitive interface with strong noise immunity
    • GP-IB interface available on RM3543-01 for automated systems

     

  • The RM3544 Resistance Meter is a high-precision instrument designed for DC resistance measurement in motors, transformers, coils, and power contacts. Ideal for both manual and automated production lines, it ensures fast, reliable, and accurate inspection of electrical components.

    Key Features

    • High-precision measurement: 0.02% basic accuracy, 1 μΩ resolution
    • Wide range: 30 mΩ to 3.5 MΩ, suitable for coils, transformers, and relays
    • Maximum testing current: 300 mA
    • Temperature correction ensures accurate results even with thermal fluctuations
    • EXT I/O, RS-232C, and USB support (RM3544-01) for automated production line integration
    • Optional LED comparator and audible PASS/FAIL tones for noisy environments
    • Fast measurement speed: 21 ms (50 Hz) / 18 ms (60 Hz)

     

  • The RM3545A Resistance Meter is a high-precision instrument designed for accurate resistance measurement in production lines and EV power systems. Ideal for monitoring welds, busbars, and electrical connections, it ensures quality, efficiency, and traceability.

    Key Features

    • Ultra-high precision: 0.045% basic accuracy, 1 nΩ resolution
    • Wide measurement range: 1 nΩ to 1200 MΩ
    • 1 A maximum testing current for reliable low-resistance measurement
    • Offset Voltage Compensation (OVC) for EMF correction
    • Temperature measurement and correction (TC) for consistent results
    • Multi-channel support: up to 20 channels with Z3003 multiplexer
    • High path resistance tolerance for seamless integration into automated systems
    • LAN interface, fast measurement (21 ms), and compatibility with Excel® and LabVIEW®
    • Advanced contact-check, comparator, control, and communications functions

     


Showing 33–48 of 88 results