HIOKI E E CORPORATION

The Digital Multimeter DT4281 is Hioki’s flagship high precision multimeter, engineered for advanced electrical and power system testing. Featuring a 60000 count display, true RMS measurement, and industry leading safety design, it delivers fast, accurate results even in complex and high energy environments.

Key Features

• High resolution 60000 count digital multimeter
• Excellent DC voltage accuracy of ±0.025 percent
• Wide AC voltage frequency range from 20 Hz to 100 kHz
• True RMS measurement for accurate readings on distorted waveforms
• Low pass filter for inverter and harmonic rich signals
• Clamp sensor based current measurement for enhanced safety
• Terminal shutter mechanism to prevent incorrect lead insertion
• Dual display for simultaneous voltage and frequency monitoring
• CAT IV 600 V and CAT III 1000 V safety rated
• Designed and manufactured in Japan with 3 year warranty

The DM7275 Precision DC Voltmeter is a high stability 7 and a half digit DC voltmeter designed to bridge the gap between research environments and high volume production lines. With a guaranteed one year accuracy of 20 ppm, it delivers reliable and repeatable measurements for lithium ion batteries, advanced capacitors, and next generation electronic components.

Key Features

• 7 and a half digit DC voltage measurement
• 1 year guaranteed 20 ppm accuracy
• Ideal for R and D and production line testing
• Capacitance contact check using built in C monitor
• Fully automatic self calibration for long term stability
• Resistant to temperature fluctuations
• Simultaneous voltage and temperature measurement
• Temperature compensated voltage display
• Built in EXT I O, LAN, and USB interfaces
• Optional GP IB or RS 232C communication models
• Built in variable power supply for global production use

The DM7275 Precision DC Voltmeter provides 7½-digit resolution and 20 ppm accuracy, making it perfect for R&D, production lines, and high-precision battery testing. Its advanced contact check, temperature compensation, and multiple connectivity options ensure reliable measurement for lithium-ion batteries, EV components, and next-generation devices.

Key Features

• High-accuracy 7½-digit DC voltmeter with 20 ppm (0.002%) guaranteed accuracy
• Built-in capacitance contact check for maximum measurement reliability
• Temperature compensation converts voltage to standard temperature values
• Fully automatic self-calibration for long-term stability
• Built-in EXT I/O, LAN, USB, GP-IB (DM7275-02), and RS-232C (DM7275-03)
• Supports R&D and production line environments worldwide
• Simultaneous measurement of temperature and voltage
• Ideal for Li-ion batteries, EV components, and electrical double-layer capacitors

The DM7276 Precision DC Voltmeter is a 7 and a half digit high accuracy instrument designed for ultra precise DC voltage measurement. With industry leading 9 ppm accuracy, it is ideal for lithium ion battery aging tests, capacitor evaluation, and next generation energy device development.

Key Features

• 7 and a half digit precision with 9 ppm accuracy
• Designed for lithium ion battery aging and evaluation
• Built in capacitance contact check for reliable measurements
• Fully automatic self calibration for long term stability
• Resistant to temperature fluctuations and environmental changes
• Simultaneous voltage and temperature measurement
• Temperature compensated voltage display
• Supports global production with variable power supply
• Built in EXT I O, LAN, and USB interfaces
• Optional GP IB or RS 232C communication models

The DMM Station MR8990 combined with the MR8740 or MR8741 Memory HiCorder delivers high precision, simultaneous DC voltage measurement across up to 32 channels. Designed for capturing minute voltage fluctuations, this system is ideal for advanced sensor analysis, battery testing, and automotive electronics evaluation.

Key Features

• High precision DC voltage measurement using DVM Unit MR8990
• Simultaneous sampling across multiple channels
• Supports up to 32 channels with expandable configuration
• Measures minute voltage fluctuations with high resolution
• Accuracy of ±0.01 percent with 1.2 million count resolution
• High speed sampling up to 500 samples per second
• Isolated inputs for enhanced safety and signal integrity
• Suitable for battery, sensor, and automotive testing
• Rack mountable system for laboratory and production use
• Compatible only with MR8740 and MR8741 Memory HiCorders

The Hioki M7103 Module is a compact, high-precision power measurement solution designed for multi-channel efficiency testing of PV inverters, high-voltage batteries, and energy storage systems. Ideal for embedded and production line applications, it offers unmatched scalability, speed, and accuracy.

Key Features

• Power analyzer-class accuracy: DC/AC ±0.07%
• Supports up to 1500 V DC measurement
• 12 channels per 4U rack unit; expandable to 120 channels
• Synchronization Source Sharing for stable efficiency measurements
• High-speed data transfer with 5 ms sampling interval
• Suitable for PV inverter and multi-MPPT string efficiency testing
• Direct measurement without differential probes for high voltages
• Compliant with EN IEC 61010 safety standards

The Hioki PW3335 Meter is a high-precision single-phase power meter designed to measure AC/DC standby power and large power loads with exceptional accuracy. Ideal for energy testing of transformers, adapters, power supplies, and motors, it supports currents up to 30 A continuous and handles high crest factors for accurate low-power measurements.

Key Features

• Measures AC/DC power from 1 mA to 20 A (max 30 A continuous)
• High-precision basic accuracy: ±0.1%
• Wide frequency bandwidth: DC to 100 kHz
• Measures harmonic and standby power per IEC62301
• Accurate even at low power factors for no-load testing
• Supports crest factor up to CF6 for high-accuracy AC adapter testing
• Multi-unit synchronization: up to 8 meters
• Optional external sensor inputs up to 5000 A (PW3335-03/-04)
• Built-in LAN, RS-232C, GP-IB, and D/A outputs depending on model

The Hioki PW3336 Meter is a high-precision, 2-channel power meter for DC, single-phase, and three-phase measurements. It delivers accurate readings for motors, inverters, power conditioners, and industrial power supplies, supporting voltages up to 1000 V and currents up to 65 A direct input.

Key Features

• Measures DC, single-phase 2-wire, single-phase 3-wire, and 3-phase 3-wire systems
• High-precision basic accuracy: ±0.1%
• Frequency bandwidth: DC to 100 kHz
• Supports currents up to 65 A direct input, up to 5000 A with optional sensors
• Harmonic analysis up to the 50th order (IEC 61000-4-7)
• Multi-unit synchronization: up to 8 units
• Built-in GP-IB or D/A output options available
• Ideal for motor, inverter, power conditioner, and industrial equipment testing

The Hioki PW3337 Meter is a high-precision, 3-channel power meter for DC, single-phase, and three-phase 4-wire systems. It is ideal for motors, inverters, power conditioners, and industrial power supplies, supporting voltages up to 1000 V and currents up to 65 A direct input.

Key Features

• Measures DC, single-phase 2-wire to 3-phase 4-wire systems
• High-precision basic accuracy: ±0.1%
• Frequency bandwidth: DC to 100 kHz
• Supports currents up to 65 A direct input, up to 5000 A with optional sensors
• Harmonic analysis up to the 50th order (IEC 61000-4-7)
• Multi-unit synchronization: up to 8 units
• Can create a 6-channel setup by synchronizing two units via PC application
• Built-in GP-IB or D/A output options available
• Ideal for development and production of motors, inverters, and power conditioners

The Hioki VT1005 Divider allows safe, accurate measurement of high voltages up to 5000 V and evaluation of inverter efficiency with exceptional precision. Its broad frequency range, high noise immunity, and differential input design make it ideal for power system and high-voltage inverter applications.

Key Features

• Maximum input voltage: 5000 V AC/DC
• Differential input method for precise measurement
• ±0.08% DC accuracy, ±0.04% at 50/60 Hz, ±0.17% at 50 kHz
• Frequency band: DC to 4 MHz (-3 dB)
• Excellent amplitude flatness: ±0.1% up to 200 kHz
• Phase flatness: ±0.1° up to 500 kHz
• Noise resistance: CMRR 80 dB typical (100 kHz)
• Detects efficiency improvements on the order of 0.1%
• Safely measures high voltages that standard analyzers cannot handle

The SM7120 Super Megohm Meter provides rapid, ultra-low current and high-resistance measurement, making it perfect for automated production lines, high-voltage applications, and precise testing of electronic components, EV parts, and insulation materials. Its 2000 V output, exceptional noise resistance, and flexible design ensure reliable, repeatable measurements even in complex environments.

Key Features

• 6.4 ms high-speed measurement including contact check
• Maximum 2000 V output for high-voltage testing
• 0.1 fA ultra-low current resolution for precise detection
• 2 × 10¹⁹ Ω maximum display range
• 300x improved noise resistance for stable results
• Built-in EXT I/O, RS-232C, GP-IB, and USB connectivity
• Multipurpose functionality: Electrometer, Picoammeter, IR Meter
• Ideal for electronic components, EVs, wearables, and insulation testing

The SM7420 Super Megohm Meter offers ultra-low current measurement with 4-channel simultaneous testing, making it ideal for automated production lines and high-precision inspection of passive components like capacitors and filters. Its advanced noise resistance, channel-independent contact checks, and multiple connectivity options ensure accurate, repeatable, and high-speed performance for mass production.

Key Features

• Four-channel ultra-low current measurement with 0.1 fA resolution
• Industry-leading noise resistance, 300x better than previous models
• High-speed testing: 6000 ps/minute for mass production efficiency
• Channel-independent low-capacitance contact check
• Built-in EXT I/O, RS-232C, GP-IB, and USB connectivity
• Ideal for automated MLCC leakage current inspection lines
• Supports integration into automated production systems

The SW2001 High Voltage Multiplexer is a durable and reliable solution designed to simplify complex motor testing setups. It allows safe and seamless switching between high voltage testing and 4 terminal low voltage measurements, helping manufacturers improve efficiency, accuracy, and equipment protection across production lines.

Key Features

• Consolidates six motor tests into one multiplexer system
• Enables safe switching between high voltage and low voltage measurements
• Supports resistance, inductance, surge, hipot, insulation resistance, and partial discharge tests
• Available in 4, 8, and 16 channel configurations
• Reduces test time and manual reconnections
• Protects low voltage instruments from stored energy damage
• Designed for long service life with high durability relays

Single Phase Power Meter Compatible with DC Measurement and Current/Power Integration Measurement

Key Features:

• Compatible with the SPECpower® (*1) benchmarking for server power consumption
• DC measurement mode, AC, and AC+DC measurement
• Integration function for current and power
• ±0.1% high basic accuracy (*2) For complete details, please refer to the specifications)
• Extended period of guaranteed accuracy of 3 years
• Complete accuracy over a wide input range

Single Phase Power Meter for Production and Inspection Lines

Key Features of HiTESTER 3333 Single-Phase Power Meter:

• Ideal for replacing portable instruments, ±0.1% basic accuracy
• Extended period of guaranteed accuracy of 3 years
• 50mA to 20A AC current range (300 V Max., Accuracy guaranteed up to 30 A)
• Print out with the 9442 and RS-232C interface

• Maximum safety in the field by absolutely preventing short-circuit accidents with fused measurement terminals and current-limiting resistor
• ±0.3% DC V basic accuracy, wide 40 Hz to 1 kHz AC V frequency characteristics
• Low-pass filter (100 Hz/ 500 Hz) cuts high harmonics (when measuring inverter fundamental waveforms)
• Connect to PC with USB communication function (optional)
• Broad -25°C (-13°F) to 65°C (149°F) operating temperature range CAT IV 600 V, CAT III 1000 V