Uncategorized

• High voltage output to 300Vp-p (±150V)
• Output current to 150 mA
• Full power bandwidth from DC to >500kHz
• Slew rate to 200V/µs
• Low distortion
• Low cost
• Custom Configuration of gain and signal Ground

• Single channel
• High voltage output to 400Vp-p (±200V)
• Output current to 125 mA
• Full power bandwidth from DC to >500kHz
• Slew rate to 400V/µs
• Monitor Output
• Precise signal amplification for multiple applications
• Compatible with any of the Tabor waveform generators

• High voltage output to 300Vp-p (±150V)
• Output current to 100 mA per channel
• Full power bandwidth from DC to >500kHz
• Slew rate to 200V/µs
• Low distortion
• Low cost
• Custom Configuration of: Gain, Signal Ground

• Dual inputs allows Differential or Phaseto-Phase voltage measurement
• High speed DSP provides up to 60 filtered readings per second
• True RMS AC measurement from 0.01Hz to 600Hz—covering VLF to aviation frequencies
• AC noise rejection 78dB—for rock solid, six digit DC Measurements
• Optional battery pack goes up to 11 hours between charges
• G Series—high input impedance probes for electrostatic applications
• CE mark Certified to EN61010
• Available ISO 17025 accredited calibration
• Three year extended warranty (one year standard warranty)

• The S type Channel card provides economical, high-performance power measurement with a basic 0.1% accuracy and enough bandwidth to handle waveforms up to 1.25 MHz.
• The A-type ultra-precision Channel card offers a 2-year accuracy rating of 0.03% of reading and bandwidth up to 1.25 MHz.
• The W type Wideband Channel card performs precision power measurements on the toughest real-world waveforms, with sampling speed fast enough to tame waveforms up to 5Mhz

• The S type Channel card provides economical, high-performance power measurement with a basic 0.1% accuracy and enough bandwidth to handle waveforms up to 1.25 MHz.
• The A-type ultra-precision Channel card offers a 2-year accuracy rating of 0.03% of reading and bandwidth up to 1.25 MHz.
• The W type Wideband Channel card performs precision power measurements on the toughest real-world waveforms, with sampling speed fast enough to tame waveforms up to 5Mhz

• 3″ Color Touch Display – Easy To Use Intuitive User Interface
• 6 Functions Choose From – AC/DC Hipot, IR, Ground Bond, Continuity & Built-in Switching
• Made in the USA – Designed & Built in San Diego CA
• Compact, Lightweight, Rugged, Fan Free, Fast (100mS min test time) & Accurate
• 5KV AC/DC Hipot, 20mA max source current
• Ground Bond 1-30A RMS (42 A peak), 100µΩ Resolution
• 100 nano-Amp Leakage Current Resolution
• Low Cost of Ownership – 2 Year Calibration Interval

• Dynamic set up: During a simple frame reading, users can define elements to be acquired, recorded, visualized and surveyed in real time.
•  Macro-command: Users can write and execute complex test sequences thanks to macro-command functions.
•  Local & Distant Integration: AT-DIAG can be driven and interrogated by external software. It can also be used with a computer through Ethernet.
• Communication ports: Communication is done through RS232, NI CAN acq. Card, specific acquisition card or system.
•  Protocols: FREERUNNING, KWP2000, CAN, LIN, FlexRay, ARINC, … Possibility to implement new protocols (customized protocol, …).
•  Multi-product & Multi-protocol Communication: Communication can be set up with multiple addresses and protocols during a single test.

• 1 software for all your equipment
• 1 software for all standards
• 1 software for your electrical and EMC tests
• Advanced functions of monitoring and control
• Automated reports
• Team of specialists at your disposal

• Fast: ACA compression and parallelization allow to speed up the calculation
• Accurate: Fully validated with measurement results on real mock-up
• Innovative: New method from research labs
• Powerful: Compute very large models
• Easy: Dedicated graphical user interface with modern layout

• Fast: ACA compression and parallelization allow to speed up the calculation
• Accurate: Fully validated with measurement results on real mock-up
• Innovative: New method from research labs
• Powerful: Compute very large models
• Easy: Dedicated graphical user interface with modern layout

• Unique user interface for all tests
• Independent from any measuring device manufacturers
• Free drivers and over 500 supported devices
• Efficient and dedicated Technical support
• Wide range of supported standards (ENxx, CISPR, AUTOMOTIVE, DO160, …)
• Interface Agilent VEE™, WindowsLabView™, LabWindows CVI™, Visual C++
• Operating system: Win XP, Vista, Seven, Windows 8
• Report in MS Office™ 2003, 2007, 2010, 2013, Open office

• Highest Range of IR Test Voltage
• Fast IR Readings
• High Resistance Measurement Range
• Expansive Test Sequence Memory
• Multi-Dwell Functionality
• Ethernet, RS232, Digital I/O, & Scanner Control
• Pico-Amp Leakage Measurement
• Test Specific Fixture & Cable
• Measure IR on Grounded Loads
• Continuously Variable IR Test Voltage
• Multi-Mode IR
• Light Weight Design

Compact, dual-band 120Hz/1kHz LCR Meter for Integration into Automated Production Lines

Dual-band 120Hz/1kHz Capacitance Meter for High Speed Inspection of Multi-Layer Ceramic Capacitors (MLCC) on Taping Machines

The New Standard for General-Purpose LCR Meters with Measurement Frequency from DC, 4Hz to 8MHz

DC, 4Hz to 8MHz measurement frequency

• High-speed measurement of 1ms (fastest time)

• High-precision measurement of ±0.05% rdg. (representative value)

• Guaranteed accuracy range from 1 mΩ, low-impedance measurement with unmatched repeatability

• DC bias function: Measure under conditions simulating actual use or in accordance with industry standards

• Exceptional specifications and cost-performance for a wide range of applications, from R&D to production lines