KEY FEATURES PROVIDE APPLICATION VERSATILITY 390AFX-4L
DESIGN PROVIDES TOTAL CONTORL OF AC AND DC POWER 390AFX-4L
- All AFX Series power source models are equipped with a digitally Programmable Controller.
- Total control of the output power mode, phase mode (form) is available from the front panel or the bus.
- All operating functions may be controlled from either the front panel or from a remote RS-232, USB or LAN interface. IVI Compliant Instrument Drivers are available.
SPECIAL AFX SERIES OPERATING FEATURES
Provides for exceptional accuracy of the AC and DC output Voltage. When enabled, accuracy improves to ±0.02% referenced to the power source internal voltmeter.
Up to 16 different waveforms can be stored in the waveform library for execution as part of a steady state program or for substitution in any output phase as part of a transient test program. Memory locations #1 through #10 are a non-editable waveforms. Locations #11-#16 are editable and can be substituted in any output phase. An unlimited number of waveforms may be stored on the computer for those using a programmable UPC.
Time Based Transients
Create and execute transients that occur over a specified time segment to modify the output waveform, voltage, and frequency for any or all phases. An output trigger is provided for synchronizing external test equipment to the actual transient event.
Cycle Based Transients
Create and execute transients that substitute a waveform in any or all phases for 1 to 100 cycles. The waveform being substituted can be selected and/or modified from the waveform library.
The AFX Series Power Source is equipped with several powerful Digital Signal Processors to create a fully integrated test system. It supplies a variety of power conditions to the device under test and meters all output performance parameters.
Special test requirements such the application of a DC offset on an AC line or AC ripple on a DC supply output are supported by selecting the AC+DC Mode of operation.
The AFX Series is an excellent source of stable AC voltage over the frequency range of 15 to 1,200 Hz. The output frequency is accurate to 0.01%.
With the ability to provide singe, split and three-phase outputs, the AFX Series is the perfect choice to provide 1 Phase to 2 or 3 Phase or 3 Phase to 1 Phase conversion.
PROTECTIVE TRANSIT CASES FOR MOBILE APPLICATIONS
POWER SOURCE SPECIFICATIONS
DC, 15 to 1,200 Hz. Full Power
All AFX models are designed for operation in 19 inch equipment racks. Models above 15 kVA require parallel operating of one AFX Master unit and one or more auxiliary no-controller (NC) units. Models 3300AFX through 3600AFX are available as cabinet systems with all internal input and output wiring, terminal blocks and parallel connections included. Pacific Power AFX Series 390AFX-4L
Standard 19 inch rack. Slide rails are available as an option for all AFX units.
See model table above for panel or cabinet height.
Approximately 25 inch, from the front panel to the rear of the chassis.
Front forced air intake with rear exhaust. Automatic Fan Speed Control for low acoustic noise and extended fan life. The available energy saving sleep modes of the AFX result in low power consumption during idle periods and extend the life of the product. Pacific Power AFX Series