1 800 665 7301 | info@tmetrix.com

Discount Products: Look through products available for a 25% – 50% discount in 2020. The items provided on a first come, first serve basis.
View Discounted Products

FormFactor DC-Q Probe

FormFactor DC-Q Probe

Multi-contact DC Probe with flat tip needles

  • Power bypass inductance: 8 nH
  • Standard DCQ probes have flat tip needles available in nickel-plated tungsten or BeCu with diameters of 0.75 mil, 1.0 mil and 1.5 mil.
  • Supports collinear and non-standard needle configurations
  • Up to 16 DC for standard; maximum of 24 DC for custom
  • Ideal for probing the entire circuit for functional test
  • DC probes can provide power or slow logic to circuit under test

 

REQUEST A QUOTE
SKU: DCP 100-1 Categories: ,



Introducing the FormFactor DC-Q Probe

The DCQ probes use controlled impedance, ceramic blade needles for low noise and high performance. This needle style allows the placement of high-quality bypass capacitors with very little series inductance due to their close proximity to the probe tip. All of the needles are connected to a common ground plane but individual needles can be easily (ground) isolated for additional low noise performance.

 

FormFactor DC-Q Probe



FormFactor DC-Q Probe

Key Features

DC-Q Probe Key Features

  • Power bypass inductance: 8 nH
  • Standard DCQ probes have flat tip needles available in nickel-plated tungsten or BeCu with diameters of 0.75 mil, 1.0 mil and 1.5 mil.
  • Supports collinear and non-standard needle configurations
  • Up to 16 DC for standard; maximum of 24 DC for custom
  • Ideal for probing the entire circuit for functional test
  • DC probes can provide power or slow logic to circuit under test

 



Key Benefits

A maximum of 16 needles are available for standard configurations and a maximum of 24 needles for custom configurations.

Advantages

  • Ideal for probing the entire circuit for functional test
  • DC probes can provide power or slow logic to circuit under test

 


FormFactor DC-Q Probe


Trust the Experts at ACA TMetrix Inc.

ACA TMetrix Inc. is a leading Canadian distributor of test and measurement instruments and design tools. For over 55 years we have provided products manufactured by the world’s leading instrument manufacturers. Leading Distributor of Design Tools and Test Equipment in Canada.

Specifications

The WPH probes feature up to 12 ceramic-bladed, nickel-plated, tungsten needles with a 2 x 12 square pin cable interface. The circuit board has been laid out such that both series and shunt components can be added to the signal path of each needle.

FormFactor DC-Q Probe 1

 

Datasheet


Contact ACA TMetrix Inc.

Address

3585 Laird Road, Unit 15 & 16, Mississauga ON L5L 5Z8

Phone: 1-800-665-7301

Fax: 1-905-890-1959

Email: info@tmetrix.com

About ACA TMetrix Inc.

ACA TMetrix Inc. is a leading supplier of test instruments and design tools in Canada. For over 50 years we have provided services and support for products that are manufactured by the world's leading instrument suppliers.

TMetrix Ltd. is Part of the ACA Group of Companies. Allan Crawford Associates (ACA), is one of Canada's largest distributors of electronic components, test equipment, and scientific solutions.

Our Location

Top