Products

The Hioki VT1005 Divider allows safe, accurate measurement of high voltages up to 5000 V and evaluation of inverter efficiency with exceptional precision. Its broad frequency range, high noise immunity, and differential input design make it ideal for power system and high-voltage inverter applications.

Key Features

• Maximum input voltage: 5000 V AC/DC
• Differential input method for precise measurement
• ±0.08% DC accuracy, ±0.04% at 50/60 Hz, ±0.17% at 50 kHz
• Frequency band: DC to 4 MHz (-3 dB)
• Excellent amplitude flatness: ±0.1% up to 200 kHz
• Phase flatness: ±0.1° up to 500 kHz
• Noise resistance: CMRR 80 dB typical (100 kHz)
• Detects efficiency improvements on the order of 0.1%
• Safely measures high voltages that standard analyzers cannot handle

The Hioki IM3523A LCR Meter is a high-speed, reliable measurement instrument designed for production lines, providing precision and efficiency at a competitive price point. Its contact check function ensures improved measurement reliability for consistent results.

Key Features

• Measurement accuracy: ±0.05% across DC to 200 kHz
• Rapid 2 millisecond test speed
• Wide measurement range: 5 mV to 5 V, 10 μA to 50 mA
• Continuous testing under mixed conditions (C-D 120 Hz, ESR 100 kHz)
• Built-in comparator and BIN classification functions
• Contact check for enhanced measurement reliability
• Multiple measurement parameters: Z, Y, θ, X, G, B, Q, Rdc, Rs, Rp, Ls, Lp, Cs, Cp, D (tanδ)
• Interfaces: USB, LAN, EXT I/O for automation

The Hioki IM3533 LCR Meter is a precision measurement instrument designed for R&D environments and transformer, winding, and coil manufacturing. It combines high accuracy, advanced inductance analysis, and built-in DC bias to support modern compliance and production testing.

Key Features

• Measurement range from DC and 1 mHz to 200 kHz
• High accuracy of ±0.05 percent across a wide signal range
• Built-in DC bias for HDMI compliance and real-world testing
• Dedicated modes for turn ratio, mutual inductance, and inductance difference
• Continuous testing across mixed conditions such as C-D and ESR
• High precision low impedance mode for low inductance and ESR testing
• Touch screen interface with intuitive operation
• Advanced frequency sweep testing available on IM3533-01
• Cable length compensation settings for improved accuracy

The Hioki IM3536 LCR Meter is a versatile, high-precision instrument designed for both R&D and production applications. With a broad frequency range and high-speed measurements, it ensures accurate evaluation of capacitors, inductors, and coils under real-world conditions.

Key Features

• Measurement frequency: DC, 4 Hz to 8 MHz (customizable up to 10 MHz)
• High-speed measurement: 1 millisecond per test
• High-precision accuracy: ±0.05% reading
• Low-impedance measurement from 1 mΩ with excellent repeatability
• DC bias function for simulating real-use conditions
• Ideal for evaluating capacitors, inductors, and power supply components
• Interfaces: USB, GP-IB, RS-232C for automated data collection
• Cost-effective solution for both R&D and production lines

The Hioki IM7583 Impedance Analyzer is a high-speed, reliable LCR measurement device ideal for testing electronic components in high-volume production environments. It combines precision, compact design, and flexible operation for a wide range of applications.

Key Features

• Test frequency range: 1 MHz to 600 MHz
• Fastest analog test speed: 0.5 milliseconds
• Basic accuracy: ±0.65% rdg.
• Half-rack body with palm-sized test head for flexible placement
• RF I-V method for accurate impedance measurement
• Contact check with DCR testing, Hi-Z reject, or waveform judgment
• Frequency sweeps, level sweeps, and time interval measurements in Analyzer Mode
• Comparator function for automated PASS/FAIL judgments

The Hioki IM7585 Impedance Analyzer is a high-speed, high-precision LCR and impedance measurement device designed for R&D and production environments. It delivers fast, accurate testing of electronic components from 1 MHz to 1.3 GHz.

Key Features

• Test frequency range: 1 MHz to 1.3 GHz
• Fastest test speed: 0.5 milliseconds (analog measurement)
• Exceptional stability with 0.07% measured value variability at 1 GHz
• Basic accuracy: ±0.65% rdg.
• Half-rack body with a palm-sized test head for flexible placement
• RF I-V method for precise impedance analysis
• Contact check with DCR testing, Hi-Z reject, or waveform judgment
• Frequency sweeps, level sweeps, and time interval measurements in Analyzer Mode
• Comparator function for PASS/FAIL judgments

The Hioki IM9201 SMD Test Fixture is a high frequency test fixture designed exclusively for the IM7580 series impedance analyzers. Supporting six common SMD package sizes, it enables stable, repeatable impedance measurements up to 3 GHz for advanced component evaluation in R&D and production environments.

Key Features

• Designed exclusively for Hioki IM7580 series impedance analyzers
• Supports impedance measurement up to 3 GHz
• Accommodates six SMD package sizes in one fixture
• Dual device guides allow fast and accurate component placement
• Optimized for high frequency stability and repeatability
• Ideal for RF components, ferrite beads, and chip inductors

A high-speed, high-precision LCR meter ideal for low-ESR and impedance testing in advanced electronic components like polymer capacitors, inductors, and piezoelectric elements.

Key Features:

• Continuous LCR/DCR/sweep measurements with one instrument
• Ultra-fast testing speeds: 1.5 ms (1 kHz), 0.5 ms (100 kHz)
• High accuracy: ±0.08% basic accuracy for Z parameter
• Ideal for low-ESR measurement of functional polymer capacitors
• Suitable for resonance testing of piezoelectric elements
• Accurate DCR and L-Q testing of inductors, coils, and transformers

The Hioki IM7580A is a compact, high-speed impedance analyzer for 1 MHz to 300 MHz testing, ideal for both production and R&D. It works seamlessly with the IM9201 SMD fixture for reliable component testing.

Key Features:

• 1 MHz to 300 MHz frequency range
• 0.5 ms test speed
• ±0.72% basic accuracy
• Compact half-rack size with palm-sized test head
• Reliable contact check functions
• Frequency, level, and time sweeps in Analyzer Mode
• RF I-V method for precise measurement

The Hioki IM7581 is a compact, high-speed impedance analyzer designed for accurate testing from 100 kHz to 300 MHz. It’s ideal for both production and development environments.

Key Features:

• 100 kHz to 300 MHz frequency range
• 0.5 ms fastest test speed
• ±0.72% basic accuracy
• Compact half-rack size, palm-sized test head
• Reliable contact check via DCR, Hi-Z reject, or waveform judgment
• Supports frequency, level, and time sweeps in Analyzer Mode
• Uses RF I-V method for precise measurement

The Hioki Impedance Analyzer IM7587 3 GHz provides precision, speed, and versatility for impedance measurements from 1 MHz to 3 GHz, ideal for both R&D and mass production applications in electronic component testing.

Key Features:

• Frequency range: 1 MHz to 3 GHz
• Test speed: 0.5 ms
• Measurement variability: 0.07%
• Basic accuracy: ±0.65% reading
• RF I-V measurement technique
• Compact half-rack design with palm-sized test head
• Robust contact check capabilities
• Analyzer mode: frequency and level sweeps, time interval measurements

Teledyne Test Tools LCR Meters offer precision testing in a compact form, perfect for R&D labs and production lines.

Key Features:

• 3.5” high-resolution color LCD display
• Test frequency up to 300 kHz with continuous output
• 0.05% basic measurement accuracy
• Spot or full frequency range with OPEN/SHORT correction
• Automatic Level Control (ALC) for consistent voltage on components like MLCCs
• Measure up to 4 parameters simultaneously
• DCR measurement & built-in ±2.5 V DC bias
• PASS/FAIL indicator and 10-bin sorting function
• List measurement for automated test sweeps (up to 10 points)
• Interfaces: RS-232C, USB, handler, and USB storage
• Compact 2U, 1/2 rack size for automated test setups

The Aim-TTi LCR400 Precision LCR Meter delivers high-accuracy component testing in a compact, user-friendly design. With 0.1% basic accuracy and built-in comparator functions, it’s ideal for precision component measurement and quality control.

Key Features:

• 0.1% basic measurement accuracy for reliable results
• Automatic component recognition for ease of operation
• Dual 5-digit high-brightness displays for clear readings
• Built-in 4-terminal component fixture for stable connections
• Limits comparator with 8 Pass bins and 2 Fail bins
• Three selectable test frequencies with switchable bias
• RS232 standard interface for PC connectivity
• Optional SMD tweezers, Kelvin clips, and PC logging software

The RM3542C Resistance Meter is designed for high-precision, in-line testing of chip resistors and ferrite beads. It delivers fast, reliable, and safe measurement for modern production lines.

Key Features

• ΔR function for cross-stage process comparison (RM3542C-3)
• BIN grading for instant sorting into up to 7 categories (RM3542C-3)
• Jumper resistance support accelerates low-resistance measurements
• Low-stress testing ≤5 V prevents damage to delicate components
• Continuous contact monitoring ensures reliable results
• Galvanically isolated architecture for noise immunity on production lines
• Optimized integration time for high-speed, repeatable measurements

The RM3543 Resistance HiTESTER is a precision DC resistance meter designed to measure ultra-low and low shunt resistances with outstanding accuracy. Ideal for automated systems, this tester ensures repeatable results and reliable data for current sensing resistors, shunts, and other low-resistance components.

Key Features

• Measures super-low resistances: 0.1 mΩ with ±0.16% accuracy
• Ultra-high resolution: 0.01 μΩ for precise inspection
• Offset voltage correction minimizes thermoelectromotive effects
• Scaling function adjusts readings for mounted components
• Contact improvement function ensures stable and reliable measurements
• Advanced contact-check, comparator, and data export capabilities
• Intuitive interface with strong noise immunity
• GP-IB interface available on RM3543-01 for automated systems

The RM3544 Resistance Meter is a high-precision instrument designed for DC resistance measurement in motors, transformers, coils, and power contacts. Ideal for both manual and automated production lines, it ensures fast, reliable, and accurate inspection of electrical components.

Key Features

• High-precision measurement: 0.02% basic accuracy, 1 μΩ resolution
• Wide range: 30 mΩ to 3.5 MΩ, suitable for coils, transformers, and relays
• Maximum testing current: 300 mA
• Temperature correction ensures accurate results even with thermal fluctuations
• EXT I/O, RS-232C, and USB support (RM3544-01) for automated production line integration
• Optional LED comparator and audible PASS/FAIL tones for noisy environments
• Fast measurement speed: 21 ms (50 Hz) / 18 ms (60 Hz)