Products

The SW1001 Switch Mainframe is designed to expand your battery testing capabilities by connecting multiple measuring instruments and multiplexer modules for fast, accurate, and automated multi-channel evaluation. Perfect for R&D and production lines, it supports OCV, internal resistance, external potential, and impedance measurements of battery cells up to 60 V DC.

Key Features

• Connect up to 3 SW9001 or SW9002 multiplexer modules
• Supports up to 66 channels (2-wire) or 18 channels (4-terminal pair)
• Switch between two measuring instruments seamlessly
• Accurate OCV, internal resistance, and external potential measurement
• Circuit-design optimized for precise impedance readings
• Channel switching as fast as 11 ms
• PC application support for easy multi-channel management
• Scan function automates sequential measurements across channels

The SW1002 Switch Mainframe is designed to expand multi-channel battery testing capabilities for research, development, and production environments. It supports connection of multiple measuring instruments and multiplexer modules to measure OCV, internal resistance, external potential, and AC impedance on battery cells up to 60 V DC.

Key Features

• Houses up to 12 SW9001 or SW9002 multiplexer modules
• Supports up to 264 channels (2-wire) or 72 channels (4-terminal pair)
• Switch between two measuring instruments for flexible testing
• Accurate OCV, internal resistance, and external potential measurement
• Circuit-design optimized for precise impedance readings (0.01% f.s.)
• Channel switching as fast as 11 ms
• Scan function automates sequential measurements across channels
• Compatible with PC application for multi-channel control and data management

The SW2001 High Voltage Multiplexer is a durable and reliable solution designed to simplify complex motor testing setups. It allows safe and seamless switching between high voltage testing and 4 terminal low voltage measurements, helping manufacturers improve efficiency, accuracy, and equipment protection across production lines.

Key Features

• Consolidates six motor tests into one multiplexer system
• Enables safe switching between high voltage and low voltage measurements
• Supports resistance, inductance, surge, hipot, insulation resistance, and partial discharge tests
• Available in 4, 8, and 16 channel configurations
• Reduces test time and manual reconnections
• Protects low voltage instruments from stored energy damage
• Designed for long service life with high durability relays

T3AFG Series – Waveform Generators from Teledyne Test Tools combine precision, speed, and flexibility with advanced DDS technology for high-quality signal generation.

Key Features:

• Models available with 30 MHz to 500 MHz bandwidth
• Dual-channel output with 20 Vpp amplitude
• Max sampling rate up to 2.4 GSa/s
• 14-bit or 16-bit vertical resolution (model-dependent)
• 4.3″ responsive touchscreen display
• 196 built-in arbitrary waveforms
• Supports AM, FM, PM, PSK, FSK, ASK, PWM, Sweep, Burst, Harmonic
• USB Host, USB Device, LAN VXI-11 standard interfaces
• Optional IQ modulation support (on high-end models)
• True waveform combination and flexible phase/channel control

T3AWG3K Series – Waveform Generators deliver high-definition, multi-channel precision for engineers who demand signal quality, flexibility, and performance.

Key Features:

• Models available with 250 MHz or 350 MHz sinewave frequency
• 2, 4, and 8 analog channel configurations
• 16-bit vertical resolution for high signal fidelity
• Max sampling rate of 1.2 GS/s
• Output voltage window up to ±24 V (into High Impedance)
• 128 Mpts/channel memory (upgradeable to 1 Gpts/channel)
• True Arbitrary Mode and Direct Digital Synthesis (DDS)
• Add 8, 16, or 32 digital patterns synchronized with analog output
• Ideal for mixed-signal testing, high-voltage waveform generation, and multi-domain R&D

T3DMM Series – Digital Multimeters deliver precision, speed, and display-rich features, ideal for professional labs, R&D, and production testing.

Key Features:

• Available in 4.5-digit (60,000 counts) and 6.5-digit (2,200,000 counts) models
• True RMS AC voltage and current measurement
• 4.3” TFT-LCD with 480×272 resolution
• Multiple display modes: Number, Histogram, Trend Chart, Bar Meter, Statistics
• Advanced math functions: Max, Min, Avg, Std Dev, dBm/dB, Relative, Pass/Fail
• Supports remote operation via USB, LAN, SCPI commands
• Built-in cold terminal thermocouple compensation
• Wide range of measurements: Voltage, Current, Resistance, Capacitance, Frequency, Period, Temperature
• Internal 1GB storage and USB host for external data access
• User-friendly softkey interface and built-in help system

T3PS Series – Power Supplies by Teledyne Test Tools deliver precision, flexibility, and control in a compact form for both lab and industrial use.

Key Features:

• Programmable and non-programmable options with up to 4 independent outputs
• Wide voltage and current ranges up to 60 V / 200 A / 1520 W
• Multiple display types: TFT LCD, dual numeric, high-resolution panels
• Output modes: Constant Voltage (CV), Constant Current (CC), Constant Resistance (CR)
• Low ripple and fast transient response: ≤1 mVrms, ≤50 µs
• Built-in series/parallel tracking, electronic load modes, and remote sense terminals
• Interfaces: USB, LAN, RS-232, RS-485, Analog Control, Ext I/O
• Advanced features: OVP, OCP, UVL, programmable slew rates, panel lock
• Ideal for use in automotive, mobile, defense, research labs, and education

The Teledyne T3SA Series Spectrum Analyzers deliver high-performance signal analysis from 9 kHz to 3.2 GHz in a compact, easy-to-use design. Ideal for R&D, education, production, and pre-compliance testing, it features a large touchscreen and advanced digital IF technology.

Key Features:

• All Digital IF technology10.1”
• WVGA (1024 x 600) touchscreen display
• Frequency range from 9 kHz to 3.2 GHz
• -161 dBm/Hz displayed average noise level (typical)
• -98 dBc/Hz @ 10 kHz offset phase noise (typical)
• Total amplitude accuracy < 0.7 dB
• 1 Hz minimum resolution bandwidth (RBW)
• Built-in preamplifier for improved sensitivity

Typical Applications

● Research Laboratory
● Development Laboratory
● Repair and Maintenance
● Calibration Laboratory
● Automatic Production Test
● General bench-top use

Teledyne Test Tools T3DAQ1-16 is a powerful 16-channel Data Acquisition Unit, perfect for R&D and production testing environments.

Key Features:

• 16-channel input (12 multi-purpose + 4 current)
• Built on a 6½ digit digital multimeter platform
• Wide range of electrical measurements: voltage, current, resistance, capacitance, frequency
• True-RMS accuracy for AC voltage and current
• Large 4.3″ TFT LCD with dual-display views
• Display modes: Histogram, Trend, Bar Graph, Statistics, or Number
• USB Host, USB Device, and LAN connectivity
• Cold terminal thermocouple compensation
• Softkey interface for intuitive navigation

The TESLA200 is a semi- or fully-automated 200 mm on-wafer probing solution designed for advanced power semiconductor testing.

Key Features:

• On-wafer device testing up to 10,000 V DC and 600 A.
• Supports IGBT, GaN, SiC, and Si devices.
• Advanced MicroVac™ and FemtoGuard™ technologies for low-noise, accurate measurements.
• Wide thermal range from -55°C to +300°C.
• Safety-certified interlock system with ergonomic clear enclosure.
• Compatible with T.I.P.S. “LuPo” High Voltage / High Power Probe Cards.
• Fully automated wafer handling, including thinned/warped wafers.
• Field-upgradeable to scale with growing test requirements.

Cascade TESLA300 – Advanced On-Wafer Power Device Characterization

Key Features:

• High-voltage and high-current testing up to 10 kV / 600 A.
• Integrated AttoGuard™ and FemtoGuard™ technology for ultra-low leakage and capacitance.
• MicroVac™ chuck surface for thin wafer handling and low contact resistance.
• TÜV-certified safety system with interlocks and full enclosure.
• Top-lift wafer loading eliminates lift pins for accurate vertical device measurements.
• Full thermal range from -60°C to +300°C with efficient transition times.
• Seamless integration with Keysight and Keithley analyzers.
• Remote operation capability for safe offsite control.
• Velox and Velox Dash™ software for intuitive automation.

The TetrAMM is a high precision 4-channel picoammeter engineered for fast and reliable low current measurements in advanced research and detector applications. Designed for demanding laboratory and beamline environments, the system delivers simultaneous 24-bit sampling at speeds up to 100 kHz per channel. Its integrated bias voltage source, high speed Ethernet connectivity, and real time onboard processing make it an ideal solution for applications requiring accurate multi channel current monitoring and detector biasing.

Key Features

• 4 channel simultaneous current measurement
• 24 bit ADC resolution for precise low current detection
• Sampling rate up to 100 kHz per channel
• Integrated low noise bias voltage source
• Bipolar current measurement capability
• Gigabit Ethernet interface with TCP/IP and UDP support
• SFP link for high throughput data acquisition
• Configurable sampling frequency and auto ranging functionality
• Trigger output with configurable threshold detection
• Real time FPGA based onboard data processing
• Compact and robust instrument design
• Plug and play oscilloscope software included

A high-purity 20MHz DDS function generator designed for engineers requiring precision signal output, advanced modulation, and digital control.

Key Features:

• Frequency range: 0.001Hz to 20MHz
• High resolution: 6 digits or 1mHz
• Excellent stability (1ppm) and 10ppm one-year accuracy
• Digital control for phase-continuous sweep (linear or logarithmic)
• Output range: 5mV to 20V peak-to-peak from 50 or 600 Ohms
• Low distortion sine wave with high spectral purity
• Built-in modulation: AM, FSK, gated mode, tone switching
• Store and recall multiple instrument setups
• USB and RS232 interfaces for remote control

A high-performance dual-channel function/arbitrary/pulse generator available in 25MHz and 50MHz models designed for precision testing and advanced signal generation.

Key Features:

• Frequency range: 0.001 mHz to 25MHz/50MHz
• Dual-channel operation with independent and coupled modes
• 14-digit resolution or 1µHz resolution for precise control
• Standard waveforms: sine, square, ramp, pulse, sin(x)/x, noise, exponential, logarithmic, and PRBS
• True pulse generation with variable delay and rise/fall times
• Arbitrary waveform capability up to 128K points at 125MS/s
• Waveform storage via USB flash drive
• Large graphic LCD with simultaneous text and waveform display
• Internal and external digital modulations (AM, FM, PM, PWM, FSK, BSPK, sum, PRBS)
• USB and LAN (LXI) connectivity; optional GPIB
• Includes Waveform Manager Plus software for PC-based waveform editing

High-performance dual-channel function and arbitrary waveform generator with up to 240 MHz output for advanced test and signal needs.

Key Features:

• Frequency range from 40 MHz to 240 MHz
• Dual independent or coupled full-performance channels
• Precise phase control: 0.001° resolution
• Arbitrary waveform support up to 800 MS/s
• Replay rates up to 80 MHz
• Wide range of built-in and user-defined waveforms
• Pulse generation up to 100 MHz, low jitter
• Internal/external modulation, sweep, gated, and burst modes
• USB, LAN (LXI compliant), and optional GPIB
• PC software for waveform generation and editing

The Aim-TTi TGP3100 Series Pulse and Universal Generator combines digital precision with high-speed performance for advanced signal generation. Ideal for R&D, test automation, and education, it delivers superior waveform quality, flexibility, and ease of use.

Key Features:

• Frequency range up to 25MHz or 50MHz
• Pulse, double pulse, PRBS, and arbitrary waveform generation
• 5ns to 800s adjustable rise and fall times
• Pulse period, width, and delay resolution down to 100ps
• High drive output up to 20V pk-pk into 50Ω
• Noise generator function with user-defined distribution
• AM, FM, PM, FSK, BPSK, PWM, and PDM modulation options
• Sine wave generation up to 50MHz
• 16-bit vertical resolution, 800MS/s sampling rate
• Front USB port for waveform storage
• USB, LAN (LXI), and optional GPIB interfaces