Programmable Rack DC Power System

GENESYS+™ Programmable Rack DC Power Systems

  • High power density, lightweight, and portable
  • Output power: 30kW, 45kW, 60kW; Output voltages: 10V to 600V
  • Advanced features: Programmable V/I Slew-Rate, Constant-Power Limit, Arbitrary Waveform Generator
  • Built-in interfaces: LAN (LXI 1.5), USB (2.0), RS-232/RS-485, Isolated Analog (5V/10V)
  • Optional interfaces: IEEE, EtherCAT, Modbus-TCP, Isolated Analog 4-20mA
  • CE and UKCA marked, worldwide safety approvals, 5-year warranty

 

 

Advanced Programmable DC Power Supply Series

GENESYS+™ Bench-Top/Rack-Mount Advanced Programmable DC Power Supply – Upto 15kW, 10V to 1500V

  • Optional Interfaces: IEEE, EtherCAT, Modbus-TCP, Isolated Analog 4-20mA (IS420)
  • Output Power Levels: 1kW to 15kW, low-noise performance
  • Output Voltage/Current: Up to 1500V and 1500A
  • AC Input Options: Single-phase and three-phase with Active Power Factor Correction
  • Mechanical Options: Blank Front Panel, Air Filter Kits, Parallel Kits
  • Certifications: CE/UKCA Marked, UL/cUL/IEC/EN 61010-1
  • Warranty: 5 years

 

Genesys GEN 1U 1500W Full Rack

TDK-Lambda Genesys™ Lambda GEN H 0-40V at 0 -19A, 760W/LAN

  • Wide Range Input (85 – 265Vac Continuous)
  • Active Power Factor Correction (0.99 typical)
  • Output Voltage up to 600V, Current up to 100A
  • Built-in RS-232/RS-485 Interface Standard
  • Last Setting Memory; Front Panel Lockout
  • Advanced Parallel reports total current up to four identical units

 

TDK-Lambda Genesys™ 1U

TDK-Lambda Genesys™ 0-6V at 0-100A 1U 750W Full Rack, no option

  • High Power Density 750W in 1U full-rack size
  • Wide Range Input (85 – 265Vac Continuous)
  • Active Power Factor Correction (0.99 typical)
  • Output Voltage up to 600V, Current up to 100A
  • Built-in RS-232/RS-485 Interface Standard
  • Last Setting Memory; Front Panel Lockout
  • Advanced Parallel reports total current up to four identical units

 

Genesys GEN 1U 1500W Full Rack

Genesys™ GEN Power Supply,1U 1500W Full Rack

• Wide-range Single-phase 85-265VAC input (47-63Hz)
• Built-In RS-232/RS-485 interfaces
• Multi-Drop (RS-485) Slave Interface (31 units)
• Last-Setting Memory
• High Resolution 16 bit ADC’s and DAC’s
• Continuous Encoders for Voltage and Current Adjustment
• Parallel Operation with Active Current Sharing and Current Sum
• Independent Remote ON/OFF (Enable/Disable)
• Remote Analog Programming (V/I) and Monitoring (V/I)
• Modular and SMT design
• 19” rack-mounted
• Optional built-in LXI compliant LAN interface
• Optional built-in IEEE (488.2/SCI) interface
• Optional built-in USB (2.0) interface
• Optional built-in Isolated Analog (5V/10V) interface
• Software Drivers (LabView/LabWindows)
• Worldwide Safety Agency approvals
• CE Mark for LVD and EMC regulation
• Five Year Warranty
TDK-Lambda Genesys™ 1U

TDK-Lambda Genesys™ 1U Power supply,0-12.5V 0-60A 750W FulRac-LAN Opt

  1. AC ON/OFF Switch
  2. Air Intake allows zero stacking for maximum system flexibility and power density.
  3. Reliable encoder controls Output Voltage and sets Address.
  4. Volt Display shows Output Voltage and directly displays OVP, UVL and Address settings.
  5. Reliable encoder controls Output Current, sets baudrate and Advanced Parallel mode.
  6. Current Display shows Output Current and displays baudrate

 

Genesys™ GEN 1U 750w Full Rack

Genesys™ GEN 1U 750w Full Rack

• Wide-range Single-phase 85-265VAC input (47-63Hz)
• Built-In RS-232/RS-485 interfaces
• Multi-Drop (RS-485) Slave Interface (31 units)
• Last-Setting Memory
• High Resolution 16 bit ADC’s and DAC’s
• Continuous Encoders for Voltage and Current Adjustment
• Parallel Operation with Active Current Sharing and Current Sum
• Independent Remote ON/OFF (Enable/Disable)
• Remote Analog Programming (V/I) and Monitoring (V/I)
• Modular and SMT design
• 19” rack-mounted
• Optional built-in LXI compliant LAN interface
• Optional built-in IEEE (488.2/SCI) interface
• Optional built-in USB (2.0) interface
• Optional built-in Isolated Analog (5V/10V) interface
• Software Drivers (LabView/LabWindows)
• Worldwide Safety Agency approvals
• CE Mark for LVD and EMC regulation
• Five Year Warranty 
TDK Lambda Power Supply GEN 7

TDK Lambda Power Supply GEN 7.5-1000-IS510-3P400 available for 10% discount on a first come, first serve basis.

• High Power Density 10kW/15kW in full-rack 3U package
• High Output Current (up to 1000ADC)
• Popular worldwide 3Ф AC inputs, (208VAC, 400VAC, 480VAC)
• Power Factor 0.88 (Passive PFC on all 3Ф AC Inputs)
• Output Voltage from 7.5V (1000A) to 1500V (10A)
• Built-in RS-232/RS-485 Serial Interface (standard)
• Last Setting Memory, Safe/Auto-ReStart, Front Panel Lock/Unlock
• “Advanced Parallel” configuration reports total system current (up to four identical units)
• Global Commands for RS-232/RS-485 Serial Interface
• Continuous Encoders for Voltage and Current Adjustment (Coarse & Fine mode)
• Independent Remote SHUTOFF and Remote ENABLE/DISABLE