Products

High power, High performance probe

• High power – 66 W at 2.4 GHz and 43 W at 5 GHz
• Extremely low insertion loss of ≤ 0.4 dB (typical) up to 40 GHz
• Excellent contact control and low contact resistance
• High performance on any pad material (Al or Au)
• Longest lifetime – typically one million (1,000,000) touchdowns

Excellent Performance – Longest Lifetime

• Best price per contact – typically over one million (1,000,000) touchdowns
• RF/Microwave signal is shielded and completely air isolated in the probe body
• Excellent performance in vacuum environments and temperatures as low as 4 K, or as high as 300°C
• Highest impedance control with perfectly-symmetrical, MEMS-machined coplanar contact structure
• Probe on any pad material with minimal damage

• Highest accuracy in test results
• Easy setup even for less experienced users
• Minimized coupling losses with minimal trench dimensions
• Exclusive FormFactor-developed automated test methodology
• Wide range of tools for capturing, logging and interpreting data
• Enables hands-free autonomous calibration and re-calibration at multiple temperatures
• Search First Light feature enables automated determination of initial position for optimization
• Once aligned, all calibration functions are automated and performed through SiPh-Tool

• Proven member of a modular Power Module family, more than 800 units are in service
• Precision-regulated Bi-Polar output provides up to +12 to -12 Amps for Magnet loads.
• Smooth operation through zero amps output current, no “Crossover” problems.
• All 2510 MCOR12 Power Modules are identical and interchangeable.
• Has two high-precision measurements of output current;
  • one is used to close the regulation control loop,
  • provides an independent monitoring signal to the Crate Interface Card.
• Fault sensing circuitry in the module sets a Fault Latch which inhibits the output.
• A (momentary) Sync input signal inhibits MOSFET switching when it is active (high);
  • this eliminate switching noise .
  • reduces power line noise during sensitive analog signal measurements.

• Proven member of a modular Power Module family, more than 800 units are in service
• Precision-regulated Bi-Polar output provides up to +30 to -30 Amps for Magnet loads.
• Smooth operation through zero amps output current, no “Crossover” problems.
• All 2510R30 MCOR30 Power Modules are identical and interchangeable
  • Programming Card is plugged into the replacement module.
• Each channel has a critically-damped, LC noise filter with a cut-off frequency of about 8 kHz.
• A 16-pin front panel diagnostics connector taps onto major circuit nodes which enables quick “inthe-crate” fault evaluation

• 2U Chassis – 19″ rack mount 3.48” Height, 9.60” Depth and Weight 6lb.
• Power 120V AC 60Hz
• Washable front removable air filter
• Ball Bearing AC fans provide 330 CFM
• Dual plenum design
• Cooling for 160mm,220mm depth modules
• Diverts lower warmed air to rear of Cabinet
• RM option diverts lower air to front of Cabinet

• accommodate these control schemes
• total control system interface on a single VME-standard card
• occupies the left-most slot of the crate
• monitoring voltage reference inputs, output voltages and fault conditions
• standard VMEbus-compatible 6U by 220 mm board installed
• Eurocard crate
• Two 96-pin I/O connectors

MCOR Modules

MCOR 2/6/9/12

Each module can be customized to provide maximum outputs of 2 amps, 6 amps, 9 amps, and 12 amps. Up to 16 of these can fit in a single 6U VME style crate.

MCOR 30

Each module can provide a maximum output 30 amps. Up to 8 of these can fit in a single 6U VME style crate.

• On-wafer power device characterization up to 10,000 V DC / 600 A
• Reduced probe and device destruction at high currents up to 20 A DC and 300 A pulse
• Prevent thin wafers from curling and breaking
• Accurate Rds(on) measurement at high current
• Accurate UIS measurements at high temperature
• Roll-out stage for full wafer access and easy wafer loading/unloading
• Seamless integration between Velox and analyzers/measurement software
• High-throughput wafer autoloading (standard, thinned, warped, TAIKO)
• Easy on-screen navigation, wafer mapping, and operation of accessories with Velox

Enabling single-contact high-current/high-voltage test

• Enables coaxial measurements up to 10,000 V and 300 A pulsed (600 A in a parallel configuration) with a single touchdown
• Even distribution of high current with innovative multi-fingertip design
• Compatible with Tesla 200/300 mm power device characterization system
• Reduced measurement time by testing both high-voltage and high-current conditions with a single touchdown
• Accurate characterization of a wide range of pad sizes and test currents, with minimum pad damage and contact resistance
• Safe, reliable and repeatable high-current/voltage measurements over a wide temperature range (from -55°C to +300°C)

The Hi-Techniques FreeStyle series of Data Acquisition Systems is a versatile, capable solution for mobile and rugged data acquisition applications. FreeStyle was designed from the ground up to make data acquisition as fast and as easy as possible. Just grab your FreeStyle and your computer and head out to the test site.

Flexibility by Design

The Hi-Techniques Synergy series of Data Acquisition Systems integrates superior transient and streaming capability with optimized time and frequency domain performance. Add in universal signal conditioning, real-time math and you’ll see why Synergy is the ultimate Data Acquisition System for all of your mechanical, electrical, acoustic, shock and vibration measurements.

• Independent High Resolution Digitizers
• Up to 1 MS/s per Channel Streaming
• Remote Control, Display and Storage
• Mix and Match Input Modules
• Multiple Instrument Synchronization
• Unparalleled Analysis Capability
• Over 100 Built-in Analysis Functions
• Full Custom Analysis Capability

The Hi-Techniques Synergy series of Data Acquisition Systems integrates superior transient and streaming capability with optimized time and frequency domain performance. Add in universal signal conditioning, real-time math and you’ll see why Synergy is the ultimate Data Acquisition System for all of your mechanical, electrical, acoustic, shock and vibration measurements.

• provides precision bi-polar output currents
• minimal zero-cross over distortion
• 19” rack mounted 6U x 220 mm crate
• crate has 17 slots; 16 (slot 0 thru 15)
• connectors
  • J1 (ExtIntlk),
  • J2 (CrateOK),
  • J3 (Input Reference Voltages),
  • J4 (Output Monitors), and
  • J9 (Bitbus)